Page 5 of 7 FirstFirst ... 34567 LastLast

  1. Joined : Aug 2015
    Posts : 2
    Windows 10
       15 Aug 2015 #41

    Confirmed working - L702x


    Issue resolved, thanks to mrsmith988

    Have yet to try installing just the accelerometer driver though.
      My System SpecsSystem Spec


  2. Joined : Aug 2015
    Posts : 1
    Win 10
       16 Aug 2015 #42

    Hi, many thanks for the answers on here!

    This worked for me however when i'm not plugged in, my laptop restarts, the screen comes on and then the laptop dies. It doesn't appear to want to start at all after this, even though the battery has charge. This doesn't happen with a Dell Genuine battery but I have another replacement battery and it happens on this. Can anyone think of a suggestion?

    Many thanks,

    Jack
      My System SpecsSystem Spec


  3. Joined : Aug 2015
    Posts : 1
    Windows 10
       17 Aug 2015 #43

    mrsmith988 said: View Post
    These are the drivers that I'm using:
    Intel 3000 driver - Win 7/8 (source: Intel)
    https://www.tenforums.com/redirect-to...ows-7-8-64-bit

    Dell Quickset - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-GMFY2_ZPE.exe

    Realtek HD Audio - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-RKKTF_ZPE.exe

    Free Fall Motion Sensor - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-KT7XG_ZPE.exe

    To make everything work you need to disable auto driver updates from Windows Update or they will just keep auto-updating to the non-working drivers.

    Control Panel>System>Advanced system settings>Hardware>Device Installation Settings

    Then select:
    "No, let me choose what to do"
    "Never install driver software from Windows Update"
    "Automatically get the device app and info provided by your device manufacturer" checked.

    Then go to Programs and Features and uninstall the accelerometer, audio, video, and quickset drivers.

    Finally, open each new driver you downloaded and extract them but then cancel them as soon as the install wizard automatically starts. Navigate to the extracted drivers (they default to C:\dell\drivers) and right click on each driver installer and set them to run in compatibility mode for Windows 8 (right click on the setup and go to Properties>Compatibility).

    After setting the compatibility setting you can now install the drivers by right clicking on the setup files and selecting Run as administrator.

    Reboot as necessary and enjoy a working L502x on Windows 10. I haven't found anything that's not working yet... MaxxAudio3 even works as it should!
    Really appreciate this good work. Can I confirm that your webcam and mic are working? According to device manager I have no webcam and the mic is correctly installed but not working!
      My System SpecsSystem Spec


  4. Joined : Aug 2015
    Posts : 6
    7
       17 Aug 2015 #44

    AJ23 said: View Post
    Really appreciate this good work. Can I confirm that your webcam and mic are working? According to device manager I have no webcam and the mic is correctly installed but not working!
    Yup, working webcam and mic!
      My System SpecsSystem Spec


  5. Joined : Feb 2015
    Posts : 9
    windows 7 pro
       19 Aug 2015 #45

    My Lenovo W540 was working fine with Sleep recovery until today. Would not boot and I had to pull the battery. I wonder if one of the secret updates was the cause? I originally loaded three computers with Win10 but went back to Win7 on two of them. My main concern was Auto Updates and the hustle for unwanted APPs (guess they have to pay for Win10 somehow). I kept it in this W540 because Lenovo had Win 7 Pro all screwed up with their software additions.
      My System SpecsSystem Spec


  6. Joined : Aug 2015
    Posts : 1
    Windows 10
       20 Aug 2015 #46

    Dell XPS L502X issue with HDMI connected ACER H243H Monitor.


    mrsmith988 said: View Post
    These are the drivers that I'm using:
    Intel 3000 driver - Win 7/8 (source: Intel)
    https://www.tenforums.com/redirect-to...ows-7-8-64-bit

    Dell Quickset - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-GMFY2_ZPE.exe

    Realtek HD Audio - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-RKKTF_ZPE.exe

    Free Fall Motion Sensor - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-KT7XG_ZPE.exe

    To make everything work you need to disable auto driver updates from Windows Update or they will just keep auto-updating to the non-working drivers.

    Control Panel>System>Advanced system settings>Hardware>Device Installation Settings

    Then select:
    "No, let me choose what to do"
    "Never install driver software from Windows Update"
    "Automatically get the device app and info provided by your device manufacturer" checked.

    Then go to Programs and Features and uninstall the accelerometer, audio, video, and quickset drivers.

    Finally, open each new driver you downloaded and extract them but then cancel them as soon as the install wizard automatically starts. Navigate to the extracted drivers (they default to C:\dell\drivers) and right click on each driver installer and set them to run in compatibility mode for Windows 8 (right click on the setup and go to Properties>Compatibility).

    After setting the compatibility setting you can now install the drivers by right clicking on the setup files and selecting Run as administrator.

    Reboot as necessary and enjoy a working L502x on Windows 10. I haven't found anything that's not working yet... MaxxAudio3 even works as it should!
    Thank YOU mrsmith988! I followed your directions and they worked great after the fiasco of going from Windows 7 to Windows 10. However, I have one glitch with my HDMI connected ACER H243H Monitor. My Laptop screen goes blank and I only see my mouse pointer on the Acer Monitor. If I switch to the Mini DVI to VGA connection, the Monitor and Laptop screen work great. Does anyone know of a fix?
    Thanks!
    MS54
      My System SpecsSystem Spec


  7. Joined : Aug 2015
    Posts : 1
    Windows 10
       20 Aug 2015 #47

    Delta101 said: View Post
    Just checked the drivers on my laptop and they are the Quanta driver 14/05/2010 ver 1.0.1404.1005 - works for me..

    To fix the black screen after sleep I only installed the - STMicroelectronics Accelerometer (Free Fall Motion) driver 2.2.2.10 - just installed the driver normally.. link posted by mrsmith988 a few days ago.. post #27
    Perfect! Thank you! Worked as a charm! Just installed the regular way STMicroelectronics Accelerometer (Free Fall Motion) driver 2.2.2.10. Nothing else and works perfect! XPS 15
      My System SpecsSystem Spec


  8. Joined : Jul 2015
    Posts : 8
    Windows 10
       21 Aug 2015 #48

    My Alienware M14x has the same issue. Again Dell is very clear that this machine does not support Windows 10. That being said, I'd also say it has to do with the graphics. I have the Nvidia GT 555M, same gen as mentioned above.
      My System SpecsSystem Spec


  9. Joined : Aug 2015
    Posts : 1
    Windows 10
       21 Aug 2015 #49

    mrsmith988 said: View Post
    These are the drivers that I'm using:
    Intel 3000 driver - Win 7/8 (source: Intel)
    https://www.tenforums.com/redirect-to...ows-7-8-64-bit

    Dell Quickset - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-GMFY2_ZPE.exe

    Realtek HD Audio - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-RKKTF_ZPE.exe

    Free Fall Motion Sensor - Win 8 (source: Dell)
    http://downloads.dell.com/FOLDER0095...-KT7XG_ZPE.exe

    To make everything work you need to disable auto driver updates from Windows Update or they will just keep auto-updating to the non-working drivers.

    Control Panel>System>Advanced system settings>Hardware>Device Installation Settings

    Then select:
    "No, let me choose what to do"
    "Never install driver software from Windows Update"
    "Automatically get the device app and info provided by your device manufacturer" checked.

    Then go to Programs and Features and uninstall the accelerometer, audio, video, and quickset drivers.

    Finally, open each new driver you downloaded and extract them but then cancel them as soon as the install wizard automatically starts. Navigate to the extracted drivers (they default to C:\dell\drivers) and right click on each driver installer and set them to run in compatibility mode for Windows 8 (right click on the setup and go to Properties>Compatibility).

    After setting the compatibility setting you can now install the drivers by right clicking on the setup files and selecting Run as administrator.

    Reboot as necessary and enjoy a working L502x on Windows 10. I haven't found anything that's not working yet... MaxxAudio3 even works as it should!
    I'm having the problem with sleep mode but it's not on a laptop (custom-built desktop). When I do this step, should I only use the Intel and Realtek Audio drivers?
      My System SpecsSystem Spec


  10. Joined : Aug 2015
    Posts : 8
    Windows 10 Pro and Home
       21 Aug 2015 #50

    mrsmith988 said: View Post
    These are the drivers that I'm using: ...
    Thank you for that. Working from a Refreshed install I was having the black screen after sleep issue on my L502x, but now I have everything working perfectly. I did allow Windows to update the Intel Display and Nvidia drivers, and as of Aug 21 these automatically installed versions are working fine for me:
    Intel HD Graphics v. 9.17.10.4229
    NVDIA Graphics Driver 355.60

    For the sake of completion I would add Synaptics Pointing Device 15.2.6.0 (R293038) to the list of things to download from Dell (not the generic version), unpack and install manually in Windows 7 compatibility mode.

    I'd like to turn automatic driver updates back on, but I'll definitely make a system restore point before doing that.
      My System SpecsSystem Spec


 
Page 5 of 7 FirstFirst ... 34567 LastLast


Similar Threads
Thread Forum
Sleep Mode doesn't work right nor does it wake up.
Came across my first major problem. When I try to go into sleep mode (either through the Start menu or pressing the power button), the hard drive light blinks for a second then the screen goes black. BUT... my power light stays on (should be...
General Support
Nvidia Driver Crashing in Sleep Mode
Nvidia Win 10 64 bit Driver 353.30 appears to be crashing during sleep mode in build 10162, forcing a reboot. Has anyone else seen this with this driver and/or build? UEFI C-states are configured correctly; any solutions besides the obvious of not...
Graphic Cards
Problems with Face Recognition after Sleep Mode
Just got my Dell Inspiron 23 Series 7000 All-in-One desktop computer with 23" Touch Screen and Intel 3d RealSense camera. I have activated the Facial Recognition login feature at highest level which seems to work quite well with the 3D camers. ...
Software and Apps
USB Sleep mode: how to disable it at all.
Good afternoon, thanks for that great community. I tried all the solution on the Web to avoid the sleeping mode of my USB hard drive with no success with the build 10162 of Windows 10 64Bit. Did you have a working solution? Regards,
Drivers and Hardware
Sleep Mode Problem
When entering sleep mode, my computer displays a gray screen. Does anyone know why?
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:53.
Find Us
Twitter Facebook Google+



Windows 10 Forums