Page 2 of 3 FirstFirst 123 LastLast

  1. Joined : Jul 2015
    Posts : 21
    windows10
       31 Jul 2015 #11

    start up problem after installing windows 10


    Nemix said: View Post
    I had this happen randomly before on Windows 8.1 and my older laptop, turned off Fast Startup and it fixed my problem.

    Only that I really wanted Fast Startup on my laptop at the time but my BIOS being pre-Windows 8 did not allow it without having a random boot problem very similar to the one you're describing above.
    So, how did you resolve the problem?
      My System SpecsSystem Spec


  2. Joined : Mar 2015
    Posts : 616
    Windows 10
       31 Jul 2015 #12

    bobcat12 said: View Post
    It doesn't take me anywhere and when I restart PC the second time by pressing Power button it finally starts on the second trial.I get no error messages and Window Recovery Utility doesn't appear.
    Ok, when your system is working hold shift and click restart in the Start Menu.

    When in in recovery tool select:

    Troubleshoot >
    Advanced Options >
    Startup Repair

    If you're still have the issues try some of the other options in the recovery tool (use common sense when picking).
      My System SpecsSystem Spec


  3. Joined : Jul 2015
    Posts : 21
    windows10
       31 Jul 2015 #13

    Control Panel\Hardware and Sound\Power Options\System Settings I noticed this-Power Button Settings- Under whe n I press the power button-Hibernate. What if I change it to SHUT DOWN and maybe the PC will restart correctly?
      My System SpecsSystem Spec


  4. Joined : Mar 2015
    Posts : 616
    Windows 10
       31 Jul 2015 #14

    bobcat12 said: View Post
    Control Panel\Hardware and Sound\Power Options\System Settings I noticed this-Power Button Settings- Under whe n I press the power button-Hibernate. What if I change it to SHUT DOWN and maybe the PC will restart correctly?
    yes, it should...
      My System SpecsSystem Spec


  5. Joined : Jul 2015
    Posts : 21
    windows10
       31 Jul 2015 #15

    fracking4oil said: View Post
    yes, it should...
    No it has not solved the problem
      My System SpecsSystem Spec


  6. Joined : Mar 2015
    Posts : 616
    Windows 10
       31 Jul 2015 #16

    Do you have the same behavior if you fully power down (flip the switch on the PSU or unplug if no switch) then power back up?
      My System SpecsSystem Spec


  7. Joined : Jul 2015
    Posts : 21
    windows10
       31 Jul 2015 #17

    fracking4oil said: View Post
    Do you have the same behavior if you fully power down (flip the switch on the PSU or unplug if no switch) then power back up?
    I am not sure what do you mean by this? When I turn computer off I am using power on startup menu. Left bottom part when you see window icon. Then PC is off. When I turn on PC I use Power button on my desktop( push it) so the computer starts, when it does I see what I already said Black Window with windows logo( blue collar) (I see some little circles roiling in circles and then they stop), nothing is happening, then I turn off PC using the power button on desktop, and turn on using the power button on desktop again, then when the PC boots ok. Could it be that some settings are not correct on Power Option, System settings? I have shot down settings check mark on Turn on Fast startup, Hibernate, Sleep Lock. Power Button settings are- When I press a Power Button- Shot Down.

    Could the Hibernate mode doing this problem?
      My System SpecsSystem Spec


  8. Joined : Jul 2015
    Posts : 615
    Windows 10 Enterprise x64 (build 10586)
       01 Aug 2015 #18

    The power button definitely isn't the problem. Yes, definitely try disabling Hibernate. It will delete hiberfile.sys and hiberfile.sys is used to save information so that fast boot is possible. Fast boot is essentially hibernating.
      My System SpecsSystem Spec


  9. Joined : Jul 2015
    Posts : 21
    windows10
       01 Aug 2015 #19

    You said: View Post
    The power button definitely isn't the problem. Yes, definitely try disabling Hibernate. It will delete hiberfile.sys and hiberfile.sys is used to save information so that fast boot is possible. Fast boot is essentially hibernating.
    I found easier solution , tell me if it is ok as well-
    Holding shift while clicking shutdown (on your startup menu) also results in normal shutdown.I did that and my PC restarted just fine.
      My System SpecsSystem Spec


  10. Joined : Jul 2015
    Posts : 21
    windows10
       01 Aug 2015 #20

    Hello everyone!
    I found this solution right here-
    Hi, holding shift while clicking shutdown( that's from your start windows toolbar) also results in normal shutdown. The next time I rebooted my PC it did a fine job rebooting. Unfortunately, every time, I have to do this because Microsoft hasn't worked on that command well or not at all for Windows 10.
    I hope that it is a solution?!
    Here's more stuff-
    How to Disable Hybrid Boot and Shutdown in Windows 8
      My System SpecsSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast


Similar Threads
Thread Forum
Solved Installing 2 different video cards windows will not start.
NVIDIA TITAN X and NVIDIA GTX 980 video cards I have installed both cards separately with no problems, but when I install them both windows hangs on startup and will not give me any display. Any suggestions would be great, thanks.
Drivers and Hardware
problem installing updates
I just tried to download and install a update for this tech preview but it will not install. It I am getting the error code 0x80246017. Anyone have any idea what this error code is pointing towards?
Windows Updates and Activation
Installing software in Desktop vs Start screen mode
I was thinking about installing Start8 to my start Screen, but would it conflict with my Desktop mode, OR are Start Screen and Desktop like 2 different and separate users? Because I don't understand the purpose of logging off and on to switch...
Software and Apps
start menu problem
6631 just installed windows 10 preview as a virtual pc. i click start menu and a short menu comes up. how can i expand this to normal size
General Support
Serious Problem with BIOS after installing W10.
This is as serious as it sounds. When cold booting my Acer the Acer splash screen has lost the "Press F2 for setup" option. I can't now enter the BIOS. I tried three times. Shutdown and boot. No BIOS options. Fortunately by booting into a working...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:22.
Find Us
Twitter Facebook Google+



Windows 10 Forums