Daily Unwanted Restarts Solved

Page 2 of 5 FirstFirst 1234 ... LastLast
  1.    21 Apr 2018 #11

    Run this one to Check if the Image can be repaired:

    2. Dism /Online /Cleanup-Image /CheckHealth
    CheckHealth also seems to Stall Out so just let it run.

    Run this one to Repair the Image:
    3. DISM /Online /Cleanup-Image /RestoreHealth
      My ComputerSystem Spec


  2. Posts : 23
    Windows 10
    Thread Starter
       21 Apr 2018 #12

    When I followed instructions at this link for DISM, the tool that downloaded Win10 wanted to install windows 10, so I canceled.
    the restore looks for files to restore from, which I thought was what I spent an hour downloading.
    How to use DISM command-line utility to repair a Windows 10 image | Windows Central
      My ComputerSystem Spec

  3.    21 Apr 2018 #13

    You may not need to download the image file, instead just run DISM.

    Simple enough just to run the DISM like this:

    Run this one to see if there is corruption:
    1. Dism /Online /Cleanup-Image /ScanHealth
    It appears to stall out, then appears to Stall Out again at 20% but let it keep going.

    Run this one to Check if the Image can be repaired:
    2. Dism /Online /Cleanup-Image /CheckHealth
    CheckHealth also seems to Stall Out so just let it run.

    Run this one to Repair the Image:
    3. DISM /Online /Cleanup-Image /RestoreHealth Then, if wanted, you can run "sfc /scannow" again to verify.

    If it can't be repaired then you would need to download the iso via the Media Creation Tool. It takes a long time to download one of these images so if you don't need it let's try to avoid that. I suspect you just chose the wrong Option during the Media Creation Tool Process. You will need to choose the ISO download instead.
      My ComputerSystem Spec

  4. AndreTen's Avatar
    Posts : 16,027
    Windows 10 (Pro and Insider Pro)
       21 Apr 2018 #14

    @ksiemb, did you ever check what were the errors? You can quickly check in Releability history or Event viewer.
    Whocrashed will give you more detailed view.

    -Could also be overheating. Check your temps with some temperature monitor.
    -and turn off Fast startup, if you didn't yet.
      My ComputersSystem Spec

  5.    21 Apr 2018 #15

    "Iran this:
    DISM /Online /Cleanup-Image /ScanHealth
    All it said was the component store was repairable. Don't know whats next.
    And repairing component store, fixes Windows ? Don't think so.
    Also SFC /scannow found no corruption."


    It's telling you right here that it is Repairable? Run it again like I showed you for starters, all three Commands.
      My ComputerSystem Spec


  6. Posts : 23
    Windows 10
    Thread Starter
       22 Apr 2018 #16

    AndreTen said: View Post
    @ksiemb, did you ever check what were the errors? You can quickly check in Releability history or Event viewer.
    Whocrashed will give you more detailed view.
    Viewer is too cryptic. and all Reliability tells me is Windows was not shut down properly. DUH I already know that !

    -Could also be overheating. Check your temps with some temperature monitor.
    -and turn off Fast startup, if you didn't yet.
    Viewer is too cryptic. and all Reliability tells me is Windows was not shut down properly. DUH I already know that !

    -Could also be overheating. Check your temps with some temperature monitor.
    -and turn off Fast startup, if you didn't yet.[/QUOTE]
      My ComputerSystem Spec


  7. Posts : 23
    Windows 10
    Thread Starter
       22 Apr 2018 #17

    AndreTen said: View Post
    @ksiemb, did you ever check what were the errors? You can quickly check in Releability history or Event viewer.
    Whocrashed will give you more detailed view.event viewer as always is too cryptic. and reliability history


    -Could also be overheating. Check your temps with some temperature monitor.
    -and turn off Fast startup, if you didn't yet.
    Event Viewer too cryptic. Reliability History tells me Windows did not shut down properly. Hell, I already know that !
      My ComputerSystem Spec

  8. AndreTen's Avatar
    Posts : 16,027
    Windows 10 (Pro and Insider Pro)
       22 Apr 2018 #18

    ksiemb said: View Post
    Event Viewer too cryptic. Reliability History tells me Windows did not shut down properly. Hell, I already know that !
    Not shut down properly, that is sign of failure. Very often sign of overheating, so hardware problem, but could still be some driver related problem.


    Posting your working temps (of CPU and graphic card) would be helpful. HWinfo is good utility, but there are many.
      My ComputersSystem Spec


  9. Posts : 23
    Windows 10
    Thread Starter
       22 Apr 2018 #19

    Reliability shows APPCRASH for adaptivesleepservice.exe each day that the Windows shutsdown and restarts
      My ComputerSystem Spec


  10. Posts : 23
    Windows 10
    Thread Starter
       22 Apr 2018 #20

    FunkMaster said: View Post
    You may not need to download the image file, instead just run DISM.

    Simple enough just to run the DISM like this:







    I ran the restore. End up with "source files cannot be found. Done with screwing around with stuff that don't work ! The scanhealth part sat at 40.8 % for over 1 hour. I decided to press enter key, and it began to proceed to completion. Go figure !

    Run this one to see if there is corruption:
    1. Dism /Online /Cleanup-Image /ScanHealth
    It appears to stall out, then appears to Stall Out again at 20% but let it keep going.

    Run this one to Check if the Image can be repaired:
    2. Dism /Online /Cleanup-Image /CheckHealth
    CheckHealth also seems to Stall Out so just let it run.

    Run this one to Repair the Image:
    3. DISM /Online /Cleanup-Image /RestoreHealth Then, if wanted, you can run "sfc /scannow" again to verify.

    If it can't be repaired then you would need to download the iso via the Media Creation Tool. It takes a long time to download one of these images so if you don't need it let's try to avoid that. I suspect you just chose the wrong Option during the Media Creation Tool Process. You will need to choose the ISO download instead.
    I ran the restore. End up with "source files cannot be found. Done with screwing around with stuff that don't work ! The scanhealth part sat at 40.8 % for over 1 hour. I decided to press enter key, and it began to proceed to completion. Go figure !
      My ComputerSystem Spec


 
Page 2 of 5 FirstFirst 1234 ... LastLast

Related Threads
Unwanted Icons in General Support
Hello everybody, There are some icons on my toolbar I don't know how to get rid of. See screen shot. The messed up icon is OneDrive. OneDrive tells me wants me to sign in. When I try sign in, I get password incorrect. When I reset...
Hello and I have a strange one for you. Windows 10 Professional x64 bit has a message in the bottom right of the panel "Activate Windows Go to Settings to activate Windows". I activate Windows in Settings and again it is there the next day. It has...
Solved Unwanted emails in Browsers and Email
I haver gmail account and ever since they change their login site I get many emails I don't want (ads) and I can't find a way to unscribe from them. Can anyone help me???
It seems to be a more or less daily occurrence. My computer will close and restart without warning. This seems to have no effect elsewhere. Anything router-wise is as was. May be my bad memory, but I can't think why this happens. Has anyone...
unwanted ad in AntiVirus, Firewalls and System Security
I went to a website about two weeks ago and now every time I am online there is an ad from that site on my screen. Is there a way to eliminate it?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 14:23.
Find Us