Windows 10: PC won't hibernate after Win10 FCU 1709 clean install

Page 1 of 3 123 LastLast

  1. Posts : 11
    Windows 10 Pro 64bit
       04 Feb 2018 #1

    PC won't hibernate after Win10 FCU 1709 clean install


    I had installed my new i9-7980/Asus Rampage VI platform on Win 10 1703 and had no issues. When I did a clean install of Win10 1709, I can't get the PC to go in hibernate mode anymore. The PC "tries" (the screen goes black), but after a few seconds it just comes up again as if I didn't ask it to hibernate. When looking into the logbooks, nothing is mentioned with this respect.
    Fast boot setting is disabled (aotherwise I also had problems to get the PC doing a shutdown).

    Can somebody help? Thx.

      My ComputerSystem Spec

  2.    04 Feb 2018 #2

    A hardware device like USB flash drives and USB mice can actually keep your computer awake! The recommended solution would be to first see whether you are using the latest available drivers for your devices, install the latest drivers from device manufacturer website. You may also need to update your drivers for your graphic card.

    Use the built-in Power Troubleshooter and see if it is able to resolve the issue.
      My ComputerSystem Spec

  3. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #3

    Thanks for your suggestions, but none of them work. Troubleshooter doesn't give any issues. It worked perfectly with Win-1703.
      My ComputerSystem Spec

  4.    04 Feb 2018 #4

    I've experienced that when use of ( Windows video driver versus Manufacturers video driver ).
    Might investigate that route.
      My ComputerSystem Spec

  5. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #5

    Nope; I'm using the latest Nvidia driver 390.65, which I also used with Win-1703
      My ComputerSystem Spec

  6.    04 Feb 2018 #6

    Have you installed latest device drivers for your computer if you have try previous version of graphic card driver.

    Lets turn off and turn back on hibernation maybe it will help.

    Please open the Command Prompt by typing cmd.exe into Start Screen or Start Menu, right-click on Cmd.exe, and open it as an administrator.

    From Command Prompt execute below commands:

    powercfg /h off
    powercfg /h on
    Check to see issue resolved.
      My ComputerSystem Spec

  7. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #7

    Just did that, doesn't help
      My ComputerSystem Spec

  8.    04 Feb 2018 #8

    From Command Prompt execute below command.

    powercfg   /lastwake

    To identify the event or device that is responsible for the last waking process. Once the results are shown, check the “Instance Path:” to see where it originated from (the USB or PCI port for instance) and look under “Type:” for the nature of the cause, typically a device or a wake timer.
      My ComputerSystem Spec

  9. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #9

      My ComputerSystem Spec

  10.    04 Feb 2018 #10

    Disabling the wake-up function of one device is usually enough to prevent accidental boot-ups in the future. If you'd like to make absolutely sure that your PC stays put however, you might also want to have a look at all other devices that can potentially wake him up. To get an overview, enter

    powercfg   /devicequery  wake_armed
      My ComputerSystem Spec

Page 1 of 3 123 LastLast

Related Threads
I was one that was able to upgrade for free from Windows 7. Everything had worked just fine, yet my computer never ran nearly as good after the 1607 update, despite fixes. With my upgrade, am I able to Clean Install without having to install...
BSOD off clean install of Win10 in BSOD Crashes and Debugging
After installing windows 10, I am unable to get past the option select screen for timezone/keyboard languages and such without a critical process failure/bsod. Often times I will not even get that far, and it will simply crash the moment it boots. I...
Hi guys. I have just clean installed windows 10. (also deleted windows.old files, basically I did a full erase). so now after I installed windows 10 pro it asks me for a product key. and now I cant rollback to win 8.1 so I can upgrade
I have duly upgraded my Windows 7 desktop to Windows 10 and it is shown as 'Activated': I have also downloaded the Windows 10 ISO file and saved that to a DVD: I now want to change my boot HDD to an SSD. Would the following method make sense? 1....
Hi All, I successfully upgraded from Win 8.1 to Win 10 (both Pro 64-bit) in PC's old HDD. Now I want do a clean install on a brand new SSD. I have a few questions before I buy the SSD. 1. First off, is it possible to do a clean install of Win...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:27.
Find Us