PC won't hibernate after Win10 FCU 1709 clean install

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #11

    Intel(R) Ethernet Connection (2) I219-V. I've turned everything off now in Device Manager for my LANcard, but still the same ...
      My ComputerSystem Spec

  2. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #12

    Now Devicequery = None
      My ComputerSystem Spec

  3.    04 Feb 2018 #13

    Dirray said: View Post
    Nope; I'm using the latest Nvidia driver 390.65, which I also used with Win-1703
    Try using older drivers to see if it fixes your problem. You can always go back to the newest driver if that doesn't work. I would also suggest if possible to make a system backup to a external drive before making any changes.
      My ComputerSystem Spec

  4.    04 Feb 2018 #14

    View Event ID 1 and 42 for Wake and Sleep

    "They are Event 1 and Event 42 (wake and sleep, respectively).

    Type Even Viewer into Start Menu and press Enter key.

    Expand "Windows Logs" then click on the 'System' event log.

    Right-click, and then choose "Filter Current Log".
    Input the event id 1 and 42 number into input box above the "Task category" input box.
    In the "Event sources" window, click the drop-down and put a check-mark beside "Power-Troubleshooter" and "Kernel-Power" and then click "OK.
    You will see listing of wake & sleep events and look at the the "General" tab at the very bottom for each Event ID 1 for wake events the wake source will be shown it will be display at the "Wake Source: " entry.
      My ComputerSystem Spec

  5. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #15

    I've done that, but there is nothing mentioned for id 1 & 42, only an "old" event linked to my last switch off and power on via the Power button
      My ComputerSystem Spec

  6.    04 Feb 2018 #16

    I would like to have you run a Clean Boot.

    How to perform a Clean Boot.

    Warning: Disabling items in Services or Startup may leave your antivirus disabled until the process is ended. For this reason I would suggest that you perform this process off line.

    Press the keys to open Run, then type msconfig in the search box. This will open System Configuration.

    If you are prompted for an administrator password or for confirmation, you should enter the password or provide confirmation.

    (1) Click/tap on the General tab.

    (2) Click/tap on the Selective startup option.

    (3) Remove the check mark in the Load startup items check box.

    4. Click on the Services tab.

    5. Place a check mark in the Hide all Microsoft services check box, this will remove the Microsoft Services from the list but will still be running.

    6. Click Disable all, this will remove all of the check marks in the Services list.

    7. Click on Apply then OK

    Click on Restart in the window that opens.

    When the computer is restarted it will boot normally.

    If the problem does not continue after the restart please do the following.

    8. Divide the number of these startup services and programs by two and you place checks in the first half of these, then restart the computer.

    9. If the problem doesn't return in those services and programs remove the checks and place checks in the remaining services and programs and restart the computer.

    10. When you find which half the service or program is in go on to the next step.

    11. The half which has the service causing this problem remove half of the checks as you did previously to see which half has this service. Do the same for the programs. Restart the computer.

    12. If it isn't in the first half of these services and programs, do the same with the last half of the services and programs.

    13. Once you have narrowed it down to the last three or four services and programs remove the checks one at a time till you find the service or program at fault.

    Once you have found the service or program post it in your topic. Do not take any action until I suggest the next step.
      My ComputerSystem Spec

  7. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #17

    I'm afraid the problem is persistent, even when having done this clean boot ...
      My ComputerSystem Spec

  8.    04 Feb 2018 #18

    If you want you can repair install Windows 10 without losing anything.

      My ComputerSystem Spec

  9.    04 Feb 2018 #19

    Hi this is most probably a driver problem - you will have a new set of drivers, not necessarily the same versions as before.

    Please see
    Windows 10 does not hibernate properly - Microsoft Community

    and find this text and read the post: (and the one following)

    I think I may have figured it out (or found a solution anyway, figuring it out would have required assistance with logging which I never got - shame on M$).

    It may give you an idea.
      My ComputerSystem Spec

  10. Posts : 11
    Windows 10 Pro 64bit
    Thread Starter
       04 Feb 2018 #20

    Downgrading MEI driver to version 10 didn't solve the issue. Getting desperate ...
      My ComputerSystem Spec

Page 2 of 3 FirstFirst 123 LastLast

Related Threads
I was one that was able to upgrade for free from Windows 7. Everything had worked just fine, yet my computer never ran nearly as good after the 1607 update, despite fixes. With my upgrade, am I able to Clean Install without having to install...
BSOD off clean install of Win10 in BSOD Crashes and Debugging
After installing windows 10, I am unable to get past the option select screen for timezone/keyboard languages and such without a critical process failure/bsod. Often times I will not even get that far, and it will simply crash the moment it boots. I...
Hi guys. I have just clean installed windows 10. (also deleted windows.old files, basically I did a full erase). so now after I installed windows 10 pro it asks me for a product key. and now I cant rollback to win 8.1 so I can upgrade
I have duly upgraded my Windows 7 desktop to Windows 10 and it is shown as 'Activated': I have also downloaded the Windows 10 ISO file and saved that to a DVD: I now want to change my boot HDD to an SSD. Would the following method make sense? 1....
Hi All, I successfully upgraded from Win 8.1 to Win 10 (both Pro 64-bit) in PC's old HDD. Now I want do a clean install on a brand new SSD. I have a few questions before I buy the SSD. 1. First off, is it possible to do a clean install of Win...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:52.
Find Us