Page 2 of 4 FirstFirst 1234 LastLast

  1. Joined : May 2015
    Posts : 6
    Windows 10 Build 10102
       09 May 2015 #11

    blackroseMD1 said: View Post
    Hmm...still running fine here on 10074. I've had some issues with hard locks during cutscenes since I started using SLI, but that was remedied by drivers.
    @xdarkmario Are you still having the same issues?
    So if that's the case then maybe, it's the sweetfx that's causing it to not start at the launcher. It worked on build 46 or 52 but not 10074 or 10102. I'll have to try it without the sweetfx/reshade mod. I have a GTX 770 4GB single slot.
      My System SpecsSystem Spec


  2. Joined : Feb 2015
    Posts : 172
    Windows 10 Pro
       09 May 2015 #12

    blackroseMD1 said: View Post
    Hmm...still running fine here on 10074. I've had some issues with hard locks during cutscenes since I started using SLI, but that was remedied by drivers.
    @xdarkmario Are you still having the same issues?
    I honestly gave up, 60$ down the drain, rockstar wants nothing to do with me. Closed all my tickets
      My System SpecsSystem Spec


  3. Joined : May 2015
    Posts : 6
    Windows 10 Build 10102
       09 May 2015 #13

    xdarkmario said: View Post
    I honestly gave up, 60$ down the drain, rockstar wants nothing to do with me. Closed all my tickets
    best to go back to windows 8.1, it only works there for me. I realized it works when you upgrade from 8.1 but if you clean install Windows 10 version 10074 and up, it won't launch the game.
      My System SpecsSystem Spec


  4. Joined : May 2015
    Posts : 12
    Windows 10 Pro Insider Preview
       16 May 2015 #14

    This is the only way to get GTA 5 running on laptops with Intel/AMD :

    Check this video on how to get gta V working on AMD GPU:
    https://www.youtube.com/watch?v=VeelGDyaI0g

    Steps :
    Download the required files given in the description of the video.
    Now set gtaV.exe and gtaVlauncher.exe on high performance.
    Launch gtaV.exe via steam if you have the steam version.
    After signing in, wait 5seconds and then right click on GTA5Hotfix.exe and Run as Administrator.
    Let the command prompt run and in 5minutes your game will be patched.
    Once it says "Gta 5 has been patched. Press any key to continue.."
    press enter and then gta 5 will launch via amd

    Note :
    For best results, disable MSAA and remember to run this everytime before launching GTA V.


    Files have been scanned and theres no virus.

    Good Luck and let me know if it works for you or not !


    It works for almost everyone and I am currently getting 30-50 fps.
    Also make sure you have the latest 15.4 Beta drivers.
      My System SpecsSystem Spec

  5.    16 May 2015 #15

    GTA works for me but it doesn't like alt tabbing and hangs the whole system.

    New NVidia Windows 10 beta driver released yesterday.
      My System SpecsSystem Spec


  6. Joined : Jun 2014
    San Diego, CA
    Posts : 1,242
    Windows 10 Pro Insider Preview x64
       16 May 2015 #16

    swarfega said: View Post
    GTA works for me but it doesn't like alt tabbing and hangs the whole system.

    New NVidia Windows 10 beta driver released yesterday.
    All of the Windows 10 drivers from Nvidia have caused issues with my system, including hard locks when changing certain settings in game and when alt tabbing. I have to stick with an old DX11 driver for now in order to be able to play.
      My System SpecsSystem Spec

  7.    16 May 2015 #17

    Its odd that one computer can be fine when the next one can have different problems.
      My System SpecsSystem Spec


  8. Joined : Jun 2014
    San Diego, CA
    Posts : 1,242
    Windows 10 Pro Insider Preview x64
       16 May 2015 #18

    I'm thinking SLI could be part of the issue...but I'm not willing to give that up just to be able to run the newest drivers.
      My System SpecsSystem Spec


  9. Joined : Feb 2015
    Posts : 172
    Windows 10 Pro
       19 May 2015 #19

    aniketvcool said: View Post
    This is the only way to get GTA 5 running on laptops with Intel/AMD :

    Check this video on how to get gta V working on AMD GPU:
    https://www.youtube.com/watch?v=VeelGDyaI0g

    Steps :
    Download the required files given in the description of the video.
    Now set gtaV.exe and gtaVlauncher.exe on high performance.
    Launch gtaV.exe via steam if you have the steam version.
    After signing in, wait 5seconds and then right click on GTA5Hotfix.exe and Run as Administrator.
    Let the command prompt run and in 5minutes your game will be patched.
    Once it says "Gta 5 has been patched. Press any key to continue.."
    press enter and then gta 5 will launch via amd

    Note :
    For best results, disable MSAA and remember to run this everytime before launching GTA V.


    Files have been scanned and theres no virus.

    Good Luck and let me know if it works for you or not !


    It works for almost everyone and I am currently getting 30-50 fps.
    Also make sure you have the latest 15.4 Beta drivers.
    still dosent work, rockstar dosent like me...
      My System SpecsSystem Spec


  10. Joined : May 2015
    Posts : 12
    Windows 10 Pro Insider Preview
       19 May 2015 #20

    xdarkmario said: View Post
    still dosent work, rockstar dosent like me...
    Did you follow the same exact steps?
    If yes, then what error are you getting?

    Also when you open the hotfix you have to give it around ten minutes to do its thing.
      My System SpecsSystem Spec


 
Page 2 of 4 FirstFirst 1234 LastLast


Similar Threads
Thread Forum
Solved Programs & Features Crashing to Desktop
(Build 10240) Attempting to uninstalling anything from Programs & Features causes it to crash to desktop without giving me the uninstall utility. Has anyone else run into this? Any solution?
General Support
Touchpad Auto Selects & Auto Opens
I just ran across a problem with 10240. When I used my touchpad to move around the desktop, icons are automatically selected and started. The problem went away after a restart but now I am very careful using my touchpad. I think I may have to...
Installation and Setup
Solved Sony Vegas Pro 12 Crashing on Launch
On my PC (running build 10049), when I try to open Sony Vegas Pro 12 it closes when it gets to "Creating Windows". It was working fine a few days ago and I haven't installed any updates. It also works fine on my SP3 running the same build.
Software and Apps
Solved TP 9860 shared folders crashing
Installed-updated successfully latest 9860 build,but am unable to assign shared folders. Happened to anyone else,a workaround maybe?
Virtualization
IE 11 crashing
Getting pretty regular "IE has stopped working........" The only data I have is what's in the Event Viewer log. Tried to give MS feedback but when I do what they say, "Type Windows Feedback in the Search....", it just takes me to a Google Search...
Browsers and Email
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:36.
Find Us
Twitter Facebook Google+



Windows 10 Forums