Windows 10: GTA 5 can't load cutscene during game, can overclocking solve this?

  1.    31 Oct 2015 #1

    GTA 5 can't load cutscene during game, can overclocking solve this?


    I have recently purchased GTA 5 and ran it for the first time. When I launched the game, it told me that my specs are below minimum. I set all graphical settings to minimum and started the story mode. During the first mission, it ran fine with FPS between 30-60. After breaking into the vault and shooting through the cops, I get to the escape vehicle. It told me to press E to get in, which I did, and the game faded to black with the loading icon on the bottom right. The problem is that I waited for a minute or so and the game still did this. I have an HP Envy Dv7-7223cl which has an AMD A8-4500M APU that has 1.9 GHz of power. I hear the processor can be overclocked to 2.8 GHz but I don't know how. I have Overdrive installed and Turbo Core Control was enabled during gameplay so I don't know what else to do. Is overclocking going to solve this problem, if so, how do I do it? Please let me know.
      My ComputerSystem Spec

  2.    01 Nov 2015 #2

    I would not recommend overclocking as a fix to any graphics problem as overclocking itself is fraught with all kinds of stability problems and you could end up suspecting yet further problems that are only exaggerated with overclocking affecting the stability of your game and the OS it runs on.

    Get your game running fairly well before overclocking the computer, or you are just going to make a uncomfortable rod for your own back.
      My ComputerSystem Spec

  3.    01 Nov 2015 #3

    SoxmisUK said: View Post
    I would not recommend overclocking as a fix to any graphics problem as overclocking itself is fraught with all kinds of stability problems and you could end up suspecting yet further problems that are only exaggerated with overclocking affecting the stability of your game and the OS it runs on.

    Get your game running fairly well before overclocking the computer, or you are just going to make a uncomfortable rod for your own back.
    Well I have found some mods that reduce the textures than what the game settings can offer. I'll see if they work.

    Also, I managed to get pass the loading cutscene issue. However, I am having problems with the textures taking too long to load. I've looked online to solve these issues and they're mainly because of underpowered CPUs. There are some fixes in the graphics settings but they only reduce the issue. If you guys have any other ideas, let me know.
      My ComputerSystem Spec


 

Related Threads
as per title what i have tried is checking the installation media is good which it is checked it on another rig running windows 10. okay so what happens is it will go through the normal boot up procedure my rig that is, bios will post normally and...
Solved How can i solve this !!! in BSOD Crashes and Debugging
35386 This appears to me , when i turn on the computer and then disappears.Does someone knows how to fix this,i will be gratfull.
My RAM is G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) As you can see, it is advertised as 1600MHz. A lot of people have been having problems about it being set to 1333MHz on the BIOS, so I had to specify...
With windows 10 approaching release, wondering if it solved the issue with 8.1 where the PC would wake from a sleep state on its own? After hours of trouble shooting I gave up. any thoughts? thanks.
I'm having issues keeping my custom overclocked monitor refresh rates to stick. I run 96hz on my monitor fine in Windows 7 and 8. The issue is Nvidia Control Panel and Windows are saying my monitor is running at a custom 96hz. Unforunately UFO...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 01:16.
Find Us