Windows 10: HDD compatibility for my Motherboard Solved

  1. Posts : 4
    Windows 8.1 Pro
       12 Sep 2017 #1

    HDD compatibility for my Motherboard

    My Mother Board GIGABYTE GA-P55A-UD3, I want to upgrade my internal HDD with Hard disk HDD Enterprise 6TB Hitachi (HGST) Ultrastar He6 0F18335, 64MB, 7200 RPM, SATA 6.0Gb / s, 3.5 ", with 6 partitions, is it possible, will my mother board supports ? Please help me in this regard.
      My ComputerSystem Spec

  2.    12 Sep 2017 #2

    If your installation is UEFI, it will handle any number of primary partitions on drive.
      My ComputerSystem Spec

  3. Posts : 4
    Windows 8.1 Pro
    Thread Starter
       12 Sep 2017 #3

    Thank you, how can I check UEFI, if not installed then, can I install UEFI ?
      My ComputerSystem Spec

  4.    12 Sep 2017 #4

    That’s a 2009 era socket 1156 motherboard that has not had a BIOS update since 2010.

    Will this drive be used for Windows or just for data?

    Looking at the Gigabyte website for that motherboard, it doesn’t appear to have any “Windows 10” updates.

    Are you successfully running Windows 10 on it?

    That hard drive link leads to a non-English language site, but it appears to be this drive at Newegg; helium-filled, no less:

    My guess is that it will install and spin up, but you wouldn’t be able to access more than 2 TB of the 6 TB unless you format it as GPT rather than MBR.

    You might find the Marvel 9128 chip is a pain and therefore want to attach the drive to one of the 3 GB ports instead. Going from memory, I have had issues with Marvel controllers.

    What is the need for 6 partitions?

    Let others comment.

    I’d be a bit nervous about putting a 6 TB drive on a 7 or 8 year old motherboard.

    Here’s what the Gigabyte site says about storage:


    1. 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices

    1. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10

    Marvell 9128 chip:

    1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices

    1. Support for SATA RAID 0 and RAID 1

    * SATA3 RAID 0 4x and SATA3 2x performance are maximum theoretical values. Actual performance may vary by system configuration.

    * SATA3 SSDs are not recommended for use in RAID 0 mode on Marvell SE9128 ports.

    iTE IT8213 chip:

    1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices

    iTE IT8720 chip:

    1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
      My ComputerSystem Spec

  5. Posts : 4
    Windows 8.1 Pro
    Thread Starter
       12 Sep 2017 #5

    Thank you, I already ordered for 6TB, it's on the way, lets see what happens
      My ComputerSystem Spec

  6.    12 Sep 2017 #6

    Azeez said: View Post
    Thank you, I already ordered for 6TB, it's on the way, lets see what happens
    If your pc does not support UEFI, which seems likely from age of mobo, you will not be able to use all 6TB if that drive is to contain the Windows operating system. You will only be able to use 2TB.

    If the drive is only to be used as storage i.e. a second hard drive to drive containing OS, you can use all 6TB by formatting as a GPT drive,

    HOWEVER some older bioses may not be able to see all 6TB even if GPT.

    If this happens, you may be able to update the bios but no guarantees this will sort issue.

    You might want to check with seller before opening pckage, if you can return drive if you have opened packaging, and you cannot use it fully.

    Suppliers are normally only obliged to accept returns if unopened or faulty.
      My ComputerSystem Spec

  7. Posts : 4
    Windows 8.1 Pro
    Thread Starter
       12 Sep 2017 #7

    Thanks to all who gave suggestions, I installed 6TB HDD, made 5 partitions 1tb of 4 and the remain 1.4tb left as it is,
    It's working.
      My ComputerSystem Spec


Related Threads
compatibility in PC Custom Builds and Overclocking
Hello This is my first attempt at a build and my hardware knowledge is limited compared to my software. I have used PC parts Picker but Micro Center is near me so I built this desktop there. Now I need to see if it all fits and is compatible. ...
ASUS Motherboard compatibility in Drivers and Hardware
My Asus MB (M4A89GTD PRO/USB3) is about 5 years old. I have successfully upgraded from Win 7 Pro to Win 10. However, running on Win 10 my PC frequently locks up and has to be re-booted. As a result I down-graded to Win 7 and now all is ok. ASUS...
I have an Asus Z170M-E D3 and a Hardware compatibility list that I downloaded from My 3TB WD EZRZ isn't on that list. Does that mean I can't or shouldn't use it?
I have an older graphics card, GeForce 9500gt, and I would like to find out if it will be compatible to a newer motherboard, Asus A88XM-A. I have been searching for a list that would let me just compare the two, but can't find too much information...
W10 & GFX Compatibility in Graphic Cards
I have W10 on my laptop and the graphic cards are being shown as incompatible and am currently using Windows VGA mode. I have dual card one for battery and one for elec plug in Radeon HD 4xxx series and HD 5xxx series respectively. Does anyone...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 10:37.
Find Us