External 3.5" Buffalo USB 3.0 drive only connects at USB 2.0 mode


  1. Posts : 89
    Windows 10
       #1

    External 3.5" Buffalo USB 3.0 drive only connects at USB 2.0 mode


    I have a desktop PC that does not come with any USB 3 ports on its mainboard. Yesterday I bought a PCI-E to USB 3.0 expansion card with two ports.

    I installed the card, connected the floppy power cable, and windows 10 installed its driver with no issues. There is no yellow mark in the device manager.

    First I connected my USB 3.0, 2.5" Seagate drive and windows properly recognized it and set its speed at USB 3.0. I copied a lot of files at a constant max speed of about 95 MB/s. So far everything is good.

    Then I tried my 3.5" Buffalo USB 3.0 drive. No matter what I did, it simply would not connect at USB 3 speed, only USB 2. I tried both ports. The drive's external power adapter is connected.

    Windows does know that it's a USB 3 device, since it shows the message "This device can perform faster if connected to USB 3.0".

    The drive does come with a cable with blue USB 3 connectors.

    Anyone ever experienced such an issue before?
      My Computer


  2. Posts : 31,398
    10 Home x64 (22H2) (10 Pro on 2nd pc)
       #2

    In general, the first thing to try with any USB device that doesn't behave correctly (or at all) is to open Device Manager, find the device and uninstall it. If you don't currently have the device connected you may need to select 'show hidden devices' in Device Manager's 'View' menu.

    If an inappropriate driver had been loaded the first time it was connected it will continue to be used on all subsequent times. Uninstalling it will make windows 'forget' and choose the driver from scratch.
      My Computers


  3. Posts : 3
    Windows 10
       #3

    From my experience,I recommend you to install specific manufacturer driver for PCI-E to USB3 card.If you cannot find such drivers, look at device itself and write down the name of the chip and look online for that model.
      My Computer


  4. Posts : 89
    Windows 10
    Thread Starter
       #4

    Bree said:
    In general, the first thing to try with any USB device that doesn't behave correctly (or at all) is to open Device Manager, find the device and uninstall it. If you don't currently have the device connected you may need to select 'show hidden devices' in Device Manager's 'View' menu.

    If an inappropriate driver had been loaded the first time it was connected it will continue to be used on all subsequent times. Uninstalling it will make windows 'forget' and choose the driver from scratch.
    I did as you said but no change. Is it possible that the disk itself has a fault and cannot connect at USB 3? Firmware incompatibility?

    Maybe it's the cable but I have no spare one. It has a big USB B plug. I've used it very few times, so I doubt it's worn out, unless it was faulty from the factory.

    popvaler30 said:
    From my experience,I recommend you to install specific manufacturer driver for PCI-E to USB3 card.If you cannot find such drivers, look at device itself and write down the name of the chip and look online for that model.
    I did but couldn't find anything proper. They were all at least 4 years old. The card itself came with a CD but the driver is dated 2009. I tried this one too but nothing happened at all.
      My Computer


  5. Posts : 524
    Windows 11 Pro x64, Windows 10 Pro x64
       #5

    Please provide your computer specs, including the model of PCI-E card you are using.

    Have you tried the drive on another computer?
      My Computers


  6. Posts : 3
    Windows 10
       #6

    Please, note manufacturer of PCI -E card and find out what chip is using.And based on the name of that chip search for generic drivers, or inf drivers add install them using add new hardware and manual select inf file, or right click on inf file and select install.The chip might be Renessas, or Asmedia, or something like that, regardless of the actual name of PCI-E card.
      My Computer


  7. Posts : 3
    Windows 10
       #7

    And in bios if you have an option to enable legacy usb 3 device, enable it.
      My Computer


  8. Posts : 89
    Windows 10
    Thread Starter
       #8

    Well, I took the card to the shop and tested it there too, and my 3.5" hard disk did not work at USB 3.0 on their PC either. Apparently the card itself is faulty.

    I bought another card from another brand and it works as intended. Full USB 3.0 with my both drives. Problem solved.

    The first card was detected as "Renesas USB 3.0 eXtensible Host Controller - 0.96 (Microsoft)".

    The second card is detected as "Etron USB 3.0 eXtensible Host Controller - 1.0 (Microsoft)".

    I don't know what those 0.96 and 1.0 numbers mean.
    Last edited by eddman; 18 Aug 2017 at 07:33.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:15.
Find Us




Windows 10 Forums