Automatic updates with DD_WRT


  1. Posts : 13
    Win 10 v1511:10.0.10586.1007
       #1

    Automatic updates with DD_WRT


    I run an old wired/wireless Linksys router running DD-WRT. In case you don't know what DD_WRT is, it's a third party developed firmware developed for certain routers that allows you to very specifically determine what happens on your network.

    This is the list I use.

    65.55.108.23=0.0.0.0
    65.39.117.230=0.0.0.0
    23.218.212.69=0.0.0.0
    134.170.30.202=0.0.0.0
    137.116.81.24=0.0.0.0
    204.79.197.200=0.0.0.0
    23.218.212.69=0.0.0.0
    a-0001.a-msedge.net=0.0.0.0
    choice.microsoft.com=0.0.0.0
    choice.microsoft.com.nstac.net=0.0.0.0
    corpext.msitadfs.glbdns2.microsoft.com=0.0.0.0
    corp.sts.microsoft.com=0.0.0.0
    compatexchange.cloudapp.net=0.0.0.0
    cs1.wpc.v0cdn.net=0.0.0.0
    diagnostics.support.microsoft.com=0.0.0.0
    df.telemetry.microsoft.com=0.0.0.0
    feedback.windows.com=0.0.0.0
    feedback.search.microsoft.com=0.0.0.0
    fe2.update.microsoft.com.akadns.net=0.0.0.0
    i1.services.social.microsoft.com=0.0.0.0
    i1.services.social.microsoft.com.nsatc.net=0.0.0.0
    oca.telemetry.microsoft.com=0.0.0.0
    oca.telemetry.microsoft.com.nsatc.net=0.0.0.0
    pre.footprintpredict.com=0.0.0.0
    redir.metaservices.microsoft.com=0.0.0.0
    reports.wes.df.telemetry.microsoft.com=0.0.0.0
    services.wes.df.telemetry.microsoft.com=0.0.0.0
    settings-sandbox.data.microsoft.com=0.0.0.0
    sls.update.microsoft.com.akadns.net=0.0.0.0
    sqm.df.telemetry.microsoft.com=0.0.0.0
    sqm.telemetry.microsoft.com=0.0.0.0
    sqm.telemetry.microsoft.com.nsatc.net=0.0.0.0
    ssw.live.com=0.0.0.0
    statsfe1.ws.microsoft.com=0.0.0.0
    statsfe2.update.microsoft.com.akadns.net=0.0.0.0
    survey.watson.microsoft.com=0.0.0.0
    telecommand.telemetry.microsoft.com=0.0.0.0
    telecommand.telemetry.microsoft.com.nsatc.net=0.0.0.0
    telemetry.appex.bing.net=0.0.0.0
    telemetry.microsoft.com=0.0.0.0
    telemetry.urs.microsoft.com=0.0.0.0
    vortex-sandbox.data.microsoft.com=0.0.0.0
    vortex-win.data.microsoft.com=0.0.0.0
    vortex-sandbox.data.microsoft.com=0.0.0.0
    vortex.data.microsoft.com=0.0.0.0
    watson.live.com=0.0.0.0
    watson.microsoft.com=0.0.0.0
    watson.ppe.telemetry.microsoft.com=0.0.0.0
    watson.telemetry.microsoft.com=0.0.0.0
    watson.telemetry.microsoft.com.nsatc.net=0.0.0.0

    I'll let you figure out where these go. Again, you'll have to be running a DD-WRT enabled router. If you get that far this list will help you out.
      My Computer


  2. Posts : 766
    Microsoft Windows 10 Pro 64-bit
       #2

    Why use DD wrt isn't that as old as dirt, Try LEDE Project: Welcome to the LEDE Project

    Current Release - LEDE 17.01.2 Sat Jun 10 20:15:57 2017

    LEDE Project: Table of Hardware: Firmware downloads
    Index of /releases/17.01.2/targets/
      My Computer


  3. Posts : 13
    Win 10 v1511:10.0.10586.1007
    Thread Starter
       #3

    d/led the bin. may take me a while to flash my router.
      My Computer


  4. Posts : 766
    Microsoft Windows 10 Pro 64-bit
       #4

    lookup "luci-wrtbwmon" and "wrtbwmon" and install them, nice little live view into Network Usage.

    Automatic updates with DD_WRT-network-usage.png

    And as for add blocking there is a package for that and I think it's automated (not sure)
    Last edited by Digital Life; 07 Aug 2017 at 02:40.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 09:45.
Find Us




Windows 10 Forums