Can't Rename Drive Label in Windows 10

Page 1 of 2 12 LastLast
  1. mcw53's Avatar
    Posts : 5
    Windows 10 Pro 64-bit (1703)
       #1

    Can't Rename Drive Label in Windows 10


    I have named my USB flash drives (G,H) in Disk Management, but they continue to be unnamed in Windows Explorer.

    Can't Rename Drive Label in Windows 10-windows10diskmanagement.jpg

    I've tried everything in this tutorial: How to Rename Drive Label in Windows 10 without success. The only thing that does work is to set a default label for each drive in the registry.

    Can't Rename Drive Label in Windows 10-windows10registryeditor.jpg

    I've read several Win7 articles stating various USB problems can be resolved by uninstalling all the controllers under Universal Serial Bus controllers in Device Manager. Then restart and let Windows reinstall them as needed.

    Can't Rename Drive Label in Windows 10-windows10devicemanager.jpg

    Question: Would this be a safe/reasonable thing to do in Windows 10? Any other suggestions?

    Thanks in advance,
    Mike

    HP ProBook 450 G3
    Windows 10 Pro 64-bit (upgraded from Windows 7 Pro 64-bit)
    Intel Core i7-6500U (Skylake)
    16GB DDR3 PC3-12800
    Last edited by mcw53; 14 May 2017 at 00:01.
      My Computer

  2. dalchina's Avatar
    Posts : 24,355
    Win 10 Pro (1903)
       #2

    Hi, try rt clicking the drive in file explorer.
    Properties
    Then fill in the label name (yellow field in my screenshot).
    Can't Rename Drive Label in Windows 10-snap-2017-05-14-07.39.53.jpg

    Note the name reverts to Removable Drive if you rt click the named drive, and click Eject.

    (The one useful trick with removable drives if you use them for backups e.g. in Disk Management is to assign a drive letter late in the alphabet so they are most probably assigned the same letter next time (assuming nothing is using that drive letter) ).
      My Computers

  3. mcw53's Avatar
    Posts : 5
    Windows 10 Pro 64-bit (1703)
    Thread Starter
       #3

    Thanks. But as I said, all 5 options in the tutorial I referenced failed. That was Option #2.
      My Computer

  4. jl2509's Avatar
    Posts : 194
    Windows 10 Pro
       #4

    Can't Rename Drive Label in Windows 10-rename-external.jpg

    Try the steps in the jpg. You will lose all data though so backup first if required.

    also could try here How to a Flash Drive, SD Card, or Internal Drive to Fix Partition and Capacity Problems

    HTH
      My Computer

  5. dalchina's Avatar
    Posts : 24,355
    Win 10 Pro (1903)
       #5

    You can of course try uninstalling all the controllers under Universal Serial Bus controllers in Device Manager as you say. Whether that will help is trial and error of course. Good luck.

    Basic question- were you previously able to assign labels to these drives, but now find you can't?

    Note some had this problem in earlier builds of Win 10, and I found this comment: (Dec 16)
    Have you tried other drives? I only had this problem with Seagate USB Drives. I have had no difficulty changing names in File Explorer on drives by other makers (such as WD). Possibly a compatibility issue exists with Seagate and Windows 10.
    2014:
    It could be SanDisk's fault too. After Win 8 came out their new flash drives showed up as a fixed drive in Explorer. They have since corrected that. Their claim was to certify them for Win 8, they were wrong.
    Last edited by dalchina; 14 May 2017 at 02:56.
      My Computers

  6. larc919's Avatar
    Posts : 2,883
    Windows 10 Pro x64
       #6

    Have you tried a third party utility such as MiniTool Partition Wizard (free)?
      My Computer


  7. mcw53's Avatar
    Posts : 5
    Windows 10 Pro 64-bit (1703)
    Thread Starter
       #7

    Problem Resolved


    I ran diskpart as suggested by @jl2509. This allowed me to name my removable USB drives via ThisPC Rename & Properties, Command Prompt, PowerShell and autorun.inf file. I elected to go with the autorun.inf file and created an icon for each drive. I formatted one drive NTFS and the other FAT32.

    Can't Rename Drive Label in Windows 10-windows10diskpart.jpg

    Can't Rename Drive Label in Windows 10-windows10diskmanagement2.jpg

    Can't Rename Drive Label in Windows 10-windows10autorun.jpg

    Can't Rename Drive Label in Windows 10-windows10thispc.jpg

    Just what I wanted, until ... I restarted my laptop. Got the following error on restart: "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system. Press any key to restart".

    I removed the 2 USB drives and was able to restart the laptop. Pressing any key didn't work ... the only "key" that worked was the power button.

    Did a little research and discovered what setting a partition as active means. So I inactivated them with the following diskpart commands:

    list disk
    select disk 1
    list partition
    select partition 1
    inactive

    All is good now. Thanks jl2509
      My Computer

  8. jl2509's Avatar
    Posts : 194
    Windows 10 Pro
       #8

    Ah, sorry about that.
    The active partition is for running windows from the USB drive. Thinks they are bootable
    Just for reference, omit the line "Active" from the process supplied.

    Good you are all fixed.

    Cheers
      My Computer

  9. mcw53's Avatar
    Posts : 5
    Windows 10 Pro 64-bit (1703)
    Thread Starter
       #9

    Update: How the original problem occurred


    I have a stand-alone offline Windows XP SP3 system. Occasionally I move data between my laptop and that system with a USB flash drive. I did this today with my newly formatted FAT32 drive. I could not eject the drive from the WinXP system (device busy), so I just removed the flash drive. When I inserted it back into the laptop, the original problem reoccurred. The drive was unnamed and the autorun.inf file was gone, at least not visible. When I tried to recreate the file, I got a dialog box saying the file already existed and asked if I wanted to replace it. But, no matter how many times I clicked [Yes], the same dialog box was re-displayed.

    Any idea what's going on with my WinXP system?
      My Computer

  10. jl2509's Avatar
    Posts : 194
    Windows 10 Pro
       #10

    Hi,

    Sounds like a handle process is still accessing the usb drive, probably due to cache information that was not yet written to the disk. Try terminating the explorer process in the task manager or run powershell in admin mode and type taskkill /f /im explorer.exe

    See then if you can eject the hardware
    This may be a driver compatibility issue or just plain old process handler not releasing.

    Back in the day, people rebooted the XP system to release as all handlig process were completed prior to shutdown/restart then remove before reboot.
    Bit of a pain though....

    Sorry i'm not that familiar with Windows XP now.
    Difficult to say if the USB drive is actually 100% compatible with Windows XP too!


      My Computer


 

Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:01.
Find Us




Windows 10 Forums