Windows 10: X99 USB Problems? What is it and how can i fix it? Code 43

Page 3 of 3 FirstFirst 123
  1.    05 May 2017 #21

    ComputerGeek said: View Post
    A few more things you can try....

    • Check if a driver filter is applied to usb 3 controllers (i;ve only seen filters on a usb controller in one case but worth checking)
      • Right click the 3.x controller->Properties->Details tab. Use pull down menu and look to see if Class upper filter or Class lower filter is listed. Report what you find

    • Google usb disable selective suspend. Follow instructions to turn if off on your controllers
    • Run UsbTreeView . You can see how your devices connect back to and which controller. Disable one usb 3.x controller and test. Then enable it and disable other. See if you get same problem with each controller or maybe it's just local to one

    I have already did the USB Selective suspend setting.

    Checked for the upper and lower class and found nothing...
      My ComputerSystem Spec


  2. Posts : 471
    Win 10 Pro 15063.332 (ex-Insider)
       07 May 2017 #22

    Since both mobos act similar, and both use the same X99 chipset, you could try downloading and running the Intel Driver Update Utility to see if you need any updated drivers or a chipset update:

    http://www.intel.com/content/www/us/...rt/detect.html

    If you care not to install the driver update utility, here is the latest X99 chipset driver:

    https://downloadcenter.intel.com/pro...el-X99-Chipset

    Good luck,

    WOT
      My ComputersSystem Spec

  3.    07 May 2017 #23

    I have tried the Intel tool and also a few others and I know when it comes to that it's kind of sketchy but nothing seems to help. I will give the x99 drivers a try but the more this problem pisses me off the more I just want to get rid of the x99 all together
      My ComputerSystem Spec


  4. Posts : 471
    Win 10 Pro 15063.332 (ex-Insider)
       07 May 2017 #24

    Llamalord said: View Post
    I have tried the Intel tool and also a few others and I know when it comes to that it's kind of sketchy but nothing seems to help. I will give the x99 drivers a try but the more this problem pisses me off the more I just want to get rid of the x99 all together
    If you search for x99 chipset and usb 3 problems you will see a myriad of posts regarding same:

    https://www.google.com/#q=x99+chipse...usb+3+problems.

    Good luck,

    WOT
      My ComputersSystem Spec

  5.    07 May 2017 #25

    WOT said: View Post
    If you search for x99 chipset and usb 3 problems you will see a myriad of posts regarding same:

    https://www.google.com/#q=x99+chipse...usb+3+problems.

    Good luck,

    WOT
    Yeah I know and it sucks man...x99 has been out for how long and still having problems don't get how company's are able to get away with this
      My ComputerSystem Spec


  6. Posts : 471
    Win 10 Pro 15063.332 (ex-Insider)
       07 May 2017 #26

    Llamalord said: View Post
    Yeah I know and it sucks man...x99 has been out for how long and still having problems don't get how company's are able to get away with this
    Totally in agreement with you.
      My ComputersSystem Spec


  7. Posts : 1
    Linux and Windows 10 64bit
       11 Aug 2017 #27

    Your issues are not Windows related. I ran a test last night on my X99 (ASUS) using a Linux USB Live Drive and got my same errors. I got my board in March and I've been having issues with every single USB device at some stage. I've changed all the settings according to different advice and nothing stops the errors.

    My errors are all USB related. Mouse lag, massive delays with a USB 3 SanDisk drive connected, Novation Launchkey dropping off and errors, Audient ID14 losing connectivity, dropouts inside Cubase, regular CPU spikes under Windows 7 and slight spikes under Windows 10. Because the lag occurs under Linux as well and USB Novation dropouts in Bitwig on Linux, it cannot be software related. I even had issues with booting Linux off a USB 2 stick yesterday. I was getting BIOS hangs and other issues. Verbatim USB 2gb drive - possibly USB 1 I think and plugged into a USB 2 port. I also get massive spikes inside Cubase, and that has an eLicenser attached, which might be having issues. Cubase gets 100% spikes without overclocking the CPU and using about 10% in ASIO, if that means anything to you. Basically I'm using no CPU but I get massive jumps. Linux was doing the same thing but less regularly at a standstill and using 1% of resources. Under Windows 7 I was getting CPU spikes only in certain threads. Usually threads 1, 5 and 9, which probably means something to a tech head. In Linux the spikes were mostly in thread 3 and another that I couldn't work out (they're all red).

    I'm going to try to set up a list of errors somewhere and see how many issues relate to the X99. It doesn't seem to be just ASUS that have these issues, but every time somebody is using USB they get some kind of issues. If you only use a mouse and maybe Thunderbolt or PCIe for a soundcard it doesn't seem to affect those users as much.

    I have a feeling that everybody is getting issues at some points, maybe whilst gaming a USB controller doesn't fire at random times but its something that most people don't notice.

    There seems to be a lot of denial that there is an issue with X99 but a quick search of Google makes it clear that there are massive issues that have never been solved.
      My ComputerSystem Spec


 
Page 3 of 3 FirstFirst 123

Related Threads
I finally got my demon of a Toshiba laptop to boot from the USB ISO of Windows 10. It got exactly 64% of the way through the reinstall and then I get Error 0x80070570. I was previously in an endless loop at 64% when I tried to just use Windows...
Hi, Last night my Webcam 9000 pro stopped working and I uninstalled the software three times but still it wouldn't work. I rang Logitech team and they said, it is with Win 10 uploads. Anyone else has the same problem please? First my printer...
I was running along for 6-7 months before my start button failed me. About a week or two later the taskbar became very slow or unresponsive. Then the context menu is so very slow that I do everything to avoid right click. Now this past week I've...
Product code problems in Windows Updates and Activation
I have a desktop with Windows 7 Pro 64 bit. I tried to upgrade to W10. In order to dual boot W7 and W10 I created an ISO DVD successfully and went to use it. I booted from the DVD and when it asked for my product key (assume it wanted the W7 key) I...
Hi, New to this Forum. I have a Hp-Stream 13, which I installed Windows 10. I immediately started having problems with Wifi. The image on the taskbar shows a partially yellowed out Wifi Icon. When I try to go online a windows message comes...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:15.
Find Us