Page 1 of 4 123 ... LastLast
  1.    05 May 2017 #1
    Join Date : Dec 2015
    Posts : 124
    Windows 10 Home Single Language 64-bit

    MicroSD Card drive cant open and cant format


    Hey guys,

    I have ADATA MicroSD Card 64GB and it was working fine yesterday and I decided to format it. It does format good but I run quick format again and than its showing me the error below.

    Click image for larger version. 

Name:	2017-05-05_213133.png 
Views:	51 
Size:	2.3 KB 
ID:	133598

    Regards.
      My ComputerSystem Spec
  2.    05 May 2017 #2
    Join Date : Mar 2016
    India
    Posts : 196
    Windows 7 Ultimate 32bit

    Try formatting it with HP USB Disk Storage Format Tool 2.2.3 http://www.softpedia.com/get/System/...mat-Tool.shtml . (Right click on the HPUSBDisk.exe and run as administrator. Make sure you remove/plug out all other USB drives to prevent accidentally formatting the other drives.)
      My ComputerSystem Spec
  3.    06 May 2017 #3

    Hi there

    Try the following

    1) eject and re-insert card.

    Iif it's in an adapter ensure card is correctly in place and read only switch not enabled (usually a tiny little slider on the adapter --e.g the pny ones).

    2) run cmd in admin mode

    diskpart
    list disk

    then you should see the micro sd card as a disk -- it will probably show as 59 GB for 64GB card or similar

    continue with the command

    select disk n where n is the disk nr

    create partition primary
    format fs=ntfs quick
    active
    assign
    exit

    Then it should be working again.

    Cheers
    jimbo
      My ComputerSystem Spec
  4.    06 May 2017 #4
    Join Date : Dec 2015
    Posts : 124
    Windows 10 Home Single Language 64-bit
    Thread Starter

    Quote Originally Posted by jumanji View Post
    Try formatting it with HP USB Disk Storage Format Tool 2.2.3 http://www.softpedia.com/get/System/...mat-Tool.shtml . (Right click on the HPUSBDisk.exe and run as administrator. Make sure you remove/plug out all other USB drives to prevent accidentally formatting the other drives.)
    Its saying this error:

    Click image for larger version. 

Name:	12.png 
Views:	44 
Size:	7.5 KB 
ID:	133722
      My ComputerSystem Spec
  5.    06 May 2017 #5
    Join Date : Dec 2015
    Posts : 124
    Windows 10 Home Single Language 64-bit
    Thread Starter

    Quote Originally Posted by jimbo45 View Post
    Hi there

    Try the following

    1) eject and re-insert card.

    Iif it's in an adapter ensure card is correctly in place and read only switch not enabled (usually a tiny little slider on the adapter --e.g the pny ones).

    2) run cmd in admin mode

    diskpart
    list disk

    then you should see the micro sd card as a disk -- it will probably show as 59 GB for 64GB card or similar

    continue with the command

    select disk n where n is the disk nr

    create partition primary
    format fs=ntfs quick
    active
    assign
    exit

    Then it should be working again.

    Cheers
    jimbo
    Error:

    Click image for larger version. 

Name:	13.png 
Views:	1 
Size:	31.1 KB 
ID:	133723
      My ComputerSystem Spec
  6.    07 May 2017 #6
    Join Date : Aug 2015
    Posts : 58
    Windows 10 x64 Pro
      My ComputerSystem Spec
  7.    07 May 2017 #7
    Join Date : Dec 2015
    Posts : 124
    Windows 10 Home Single Language 64-bit
    Thread Starter

    Quote Originally Posted by ZyKLon View Post
    After doing Option Two from the given tutorial I got this error when I try to format sd card

    Click image for larger version. 

Name:	1.jpg 
Views:	40 
Size:	90.5 KB 
ID:	133943
      My ComputerSystem Spec
  8.    07 May 2017 #8
    Join Date : Aug 2015
    Posts : 58
    Windows 10 x64 Pro

    Do you tried this?
    Open a command prompt AS ADMIN
    type DISKPART press <enter>
    type LIST VOLUME press <enter>
    type SELECT VOLUME X, where X is the volume number you want to remove the write protect from.
    type ATTRIBUTES DISK CLEAR READONLY press <enter>
    you will see a prompt that the write protect has been removed
    type EXIT press <enter>
      My ComputerSystem Spec
  9.    07 May 2017 #9
    Join Date : Dec 2015
    Posts : 124
    Windows 10 Home Single Language 64-bit
    Thread Starter

    Quote Originally Posted by ZyKLon View Post
    Do you tried this?
    Open a command prompt AS ADMIN
    type DISKPART press <enter>
    type LIST VOLUME press <enter>
    type SELECT VOLUME X, where X is the volume number you want to remove the write protect from.
    type ATTRIBUTES DISK CLEAR READONLY press <enter>
    you will see a prompt that the write protect has been removed
    type EXIT press <enter>
    Done that also but cant foramt it.
      My ComputerSystem Spec
  10.    07 May 2017 #10
    Join Date : Aug 2015
    Posts : 58
    Windows 10 x64 Pro

    Do you have access to another computer with windows 7?
      My ComputerSystem Spec

 
Page 1 of 4 123 ... LastLast


Similar Threads
Thread Forum
MicroSD shows up with diminished capacity 128gb shows up as 200MB card
MicroSD shows up with diminished capacity (128gb shows up as 200MB card). It shows up with no data. It shows up a "Secure Digital Storage Device" Links: ASUS VivoTab Note 8 (M80TA) | Tablets | ASUS USA Amazon.com: Gigastone MicroSDXC 128GB C10...
Drivers and Hardware
Can't format local drive
Hi, I have a local Disk (D), which it's content is from my previous PC (Drive C in my previous PC). I don't need it anymore, and I think it is causing problems to Office. I uninstalled Office, and I'm trying to format this D drive, before I...
Drivers and Hardware
How to use a microsd card as the hdd storage?
Hello, How to use a mcrosd card as the hdd storage on tablet pc (os wndows 10 64bit) ?
Drivers and Hardware
Solved Unable to format a drive
I have 3 drives on my computer: My windows drive (SSD) on C: My Gaming drive (HDD) on D: My Extra space drive (HDD) on E: I can not format E: Here is my Disc management: 55820
Drivers and Hardware
OneDrive Storage on MicroSD Card (Dell Tablet)
Hey guys, This is a strange problem that only seems to happen on Windows 10. I have a Dell Venue 8 Pro, which shipped with Windows 8 (it may have been 8.1, can't remember) Well, the problem with it is that it only has a 32GB on-board flash...
Customization
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:38.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums