Windows 10: Installing windows 10 on advent 7201 laptop and SSD

Page 1 of 2 12 LastLast
  1.    10 Jan 2017 #1

    Installing windows 10 on advent 7201 laptop and SSD


    Hi

    Imhave a rather old advent 7201 laptop, which has accepted windows 10 pro 32 bit, had to download a display adapter driver from ATI, but works fine. Then cloned to an SSD using true image, but when I fit the SSD into the laptop I get a bright gepreen screen with error messages.....

    then tried fitting the SSD and installing windows 10 onto this from a DVD, got as far as the install process and got stuck at 0%

    the BIOS is D3B11, but can't find much support for Advent drivers / bios , but found on a forum that drivers for the PL5C, on the mustek website are compatible....

    is is there anything I need to do ? Previously added an SSD to several old PC's and laptops without problem...
      My System SpecsSystem Spec

  2.    10 Jan 2017 #2

    Best option is to image the old drive (backup the entire drive) to a separate drive. Then "restore" the image to the new SSD. That is what I had to do when I changed from conventional hard drive to SSD. I tried to clone the drive with several different clone programs including the one supplied with the Samsung SSD, Macrium Reflect and one other cloning program and they all failed at some point (all failed differently). The "image" method worked the first time with no problems.

    If you do not have a program that will make a disc image, the free version of Macrium Reflect (a UK company) will do it.
    Download Macrium Reflect FREE Edition - MajorGeeks
      My System SpecsSystem Spec

  3.    10 Jan 2017 #3

    SSD problem


    Hello

    thanks for the quick response, I did backup the HDD to an external HDD as an image, but when I try to recover it, the SSD is not showing as a target drive.

    interestingly it shows in the bios as a 120GB SSD.....but when I run acronis true image it says it has failed to find ANY HDD's

    can try macrium, if you think it would work.

    thanks
      My System SpecsSystem Spec

  4.    10 Jan 2017 #4

    Does the BIOS recognize the drive? If the BIOS does not recognize it, software/windows will not.

    Acronis should work, although I used to use Acronis and it failed me twice trying to do a restore. It didn't get a third chance and I switched to Macrium.

    Give Macrium a shot. Create the disc image and also create the WinPE rescue disc. Boot from the rescue disc to do the "restore" to the new SSD.
      My System SpecsSystem Spec

  5.    10 Jan 2017 #5

    SSD problem


    yes the Bios recognises the SSD, so am now creating a boot disk from the laptop in question as it's the only 32 bit machine I have.....making it on my 64bit PC is not suitable, or so the program tells me.

    while I try this, is there any where I can find an updated BIOS...

    thanks
      My System SpecsSystem Spec

  6.    10 Jan 2017 #6

    SSD issue


    I used macrium reflect, very easy to,use..

    cloned from existing to new SSD, completed ok, but booting from the SSD gives me a slow flashing curser top left of a blank screen....

    must St be missing something, as its definatelt recognised in the bios just won't boot from it...


    As as I said earlier, I couldn't even clean install windows 10 to the SSD , as when it got to,the copying step it stuck at 0%

    any any more ideas please
    Last edited by reddwarf4ever; 10 Jan 2017 at 16:26. Reason: Extra info
      My System SpecsSystem Spec

  7.    10 Jan 2017 #7

    Boot into Setup (Bios) go to SATA or Hard Drive Mode, change it from IDE or Compatibility mode to AHCI. Save and Exit. You will need to reinstall Windows from Install media not a clone image
      My System SpecsSystem Spec

  8.    10 Jan 2017 #8

    spunk said: View Post
    Boot into Setup (Bios) go to SATA or Hard Drive Mode, change it from IDE or Compatibility mode to AHCI. Save and Exit. You will need to reinstall Windows from Install media not a clone image
    the bios seems very basic, couldn't see this option....is it in ALL bios' also why can't I clone an image.....need to transfer my existing hdd

    thanks.....is this the reason Windows 10 would not do a clean install...?
      My System SpecsSystem Spec

  9.    10 Jan 2017 #9

    When Windows installs on a computer, it takes a snapshot of the various hardware, motherboard etc. It loads drivers specific to that hardware during the install. If you clone that HDD to a different HDD in a different computer, when the computer boots, it will look for the previous hardware, it will not find it and it will BSOD or not boot.
    Also, if the HDD was cloned from the same machine, but the HDD mode was set to IDE or Compatibility Mode, it will try to boot but fail.
    To install to an SSD, you must have the HDD mode set to AHCI. if it is a newer laptop, this setting should be set as default.
      My System SpecsSystem Spec

  10.    11 Jan 2017 #10

    SSD issue


    Taking just the fact that I could not clean install windows 10 to the SSD does this point to,the AHCI not being set...

    could updating the bios give this option, or is it a hidden bios option..

    thanks
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Hi, I am considering to buy myself a new Dell Latitude series laptop and I want to clean install Win10 on it. I want to install the 64-bit version of Win10 but how can I make sure or know if that new laptop (or ANY laptop) on the market will...
The tutorial was great - it (along with "How to Dual Boot Windows 10...") helped me tremendously in getting Windows 10 to install properly as a second operating sytem (old Vista being the 1st) on my Desktop. However, I am having difficulty...
Hello, I have an Advent Monza S200 laptop. I've recently upgraded to Windows 10. Before I upgraded my touch pad was working fine, but after the upgrade my touch pad stopped working. Once my laptop is turned on, the cursor is not visable on the...
Clean installing Windows 10 on a new laptop in Windows Updates and Activation
Bought a new Asus laptop off Amazon, and it's coming pre-installed with Windows 10. Should activation go smoothly if I wipe it and clean install using the Media Creation Tool? I hate manufacturer bloatware.
Hello this is my first visit to the forum, as the time nears for the windows 10 upgrade I had a few questions. My Samsung Activ9 came with windows 8 preinstalled, to upgrade it to 8.1 I had to manually install every windows update by hand and...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:18.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums