What is Better Dual or Single Channel Memory?

Is 2 slots of memory in performance better than 1 slot using the same amount of RAM, e.g., 1 x 16 GBs of DDR3 Laptop Memory or 2 x 8 GB of DDR3? I think I know the obvious, 1 x 16 GB in 1 slot, correct?

Also, I have seen some lower ended laptops - say with just a skylake i5 (6200U) perform better with DDR3 than overkill of DRR4 - DDR4 seemed to have latency issues, like bottle necked traffic. I have seen where there is this 10 second lag before a program responds when opening a new application using DDR4, where an i5 6th gen seems to utilize DDR3 laptop memory much smoother, instant gratification while opening up a new application. BUT, overall, while the application is up and running, DDR4 has the advantage to perform better being its at a higher frequency - 2133 HZs as opposed to DDR3 at 1600 HZs, so is there sometimes a trade off using DDR4 over DDR3 in lower ended laptops, say those who do not have a dedicated graphics card?

One more unrelated question, if I can? While swapping out a mechanical drive is as easy as they say, correct, I am not concerned about my programs I have on the mechanical drive, I just want to swap that mechanical drive out for an SSD. I do the swap, use a USB boot to Windows 10 downloaded on that USB media created tool, boot using the USB option, correct, or just boot normally, and your BIOS will automatically detect the USB Media created tool? Just a bit confused on just how easy all of that is while doing a swap, like I say, not worried about saving previous programs and files, they all exist on an external drive anyway...

Hope that isn't asking too much??? Hope my usual windows 10 forum responders reply.

Dual channel is always better then single.

RAM Performance Benchmark: Single-Channel vs. Dual-Channel - Does It Matter? | Gamers Nexus - Gaming PC Builds Hardware Benchmarks

Dual-channel vs. Single-channel, does it matter? - The NUC Blog

What's your memory assessment speed? - Windows 7 Help Forums

As others have said, it`s all in your head, the only way to prove it is to run winsat mem with 1 stick in single channel then 2 sticks in dual channel.

As far as booting from a usb stick, you have to choose it in the one time boot menu (not the bios) unless you go into the bios and list usb as the first boot option (you do not want to do that)

My settings

1) DVD drive
2) Boot drive
3) Disable
4) Disable

etc
etc
etc

Any time you want to deviate just use the boot menu, as mentioned :)


For example, If you want to boot into a Linux distro on a flash drive, just follow the above rule.

^ This, Dual channel is better

Berton said:

I've never seen a motherboard run a choice of DDR2, DDR3 or DDR4, usually just one type. The RAM modules I've used and salvaged won't interchange on the same board, are built slightly different and won't fit in the same slots. You can see that by lining up the modules to see the contacts and the all-important notch for fitting in the slots on the motherboard.

I didn't mean having a mobo and putting in 3 different "Types" of RAM on the same mobo,

I was mentioning on some lower ended i5 mobos (100 Series), they have over compensated or they thought, by putting in crazy amounts of DDR4 RAM, when in fact, without a good GPU and just an average CPU, it serves no purpose. I have seen, in particular, a friend bought a cheap Acer E15, and that mobo supported 32 GBs of DDR4, and so he bought it, put in 32 GBs of DDR4 thinking it would be fast, without a GPU, just an HD 520 and we both were scratching our heads, the machine was a real lager, even just opening up Internet Explorer, it lagged about 10-15 seconds before it could open any application, but once the app was running, it was extremely fast. Something wasn't quite right with that setup.

We tweaked everything to the same using another lower ended laptop, a Lenovo Ideapad, which had an i5 (same one - 6200U), and that machine ran very smooth, very responsive, also no GPU either, same as the Acer, just an HD 520. Both machines were sub $500. The Lenovo worked much better with just 8 GBs of DDR3 than the Acer with 32 GBs of DDR4. That is what I meant.

By the way, Intel still uses DDR3 in its skylake family, actually the skylake family both support DDR4 and DDR3, but not combined.

Thanks for all the feedback, I guess for some dual channel users, 2 x 8 GBs of any RAM is better than 1 x 16 GBs, or vice versa. I wish there was proof, just for the sake of it. Also, never use 1 stick of 4 GB and the other slot with a higher or lower amount, keep them equal, correct?

Thanks again for the advice fdegrove, addram and dude.