Page 2 of 5 FirstFirst 1234 ... LastLast

  1. Joined : Jun 2016
    Posts : 1,386
    Win10 1607
       27 Aug 2016 #11

    I have the RB22 too , and will be most unhappy when it dies, it is great for those with RSI issues, I wish I had one for each of my systems....

    I have also found the nothing on all tabs except the Tools tab , a few times with recent Setpoint SW versions, but currently I have it on a Non-AU system and I am back on version 6.30.41 (driver ver. 5.30.67) to get all the Options again.

    I also own the MX2 Mouse (Wifi/Bluetooth) but it's Options software ,seems to screwup the Setpoint stuff especially if you install the Options SW 1st on a system , in my experience, ymmv.

    KB
      My System SpecsSystem Spec


  2. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,209
    Windows 10 IoT
       27 Aug 2016 #12

    Several Logitech M570 wireless trackballs here running with no issues. I don't use the Setpoint software though. I don't need any of those functions. If I need to link or unlink device I just install the Unifying software. I use Logitech Keyboards and trackballs exclusively. They all work with the stock Windows supplied drivers.
      My System SpecsSystem Spec


  3. Joined : Jun 2016
    Posts : 1,386
    Win10 1607
       27 Aug 2016 #13

    I moved my RB22 over to my AU.83 system and it is seen fine on 6.67.83 (driver 5.90.41) on the PS2 port , the system also has a Marble Mouse on the USB Port, no problem with it and both seen in Setpoint as you would expect.

    If I remember rightly I initially had issues in win 10 and went back to Setpoint V6.30_x64 to get the mouse Tab and correct images to show up. That system was the one I installed Options for the MX2 on 1st and could not get SetPoint to recognize anything , so I had to uninstall Options altogether.

    Yes they all work fine with the M$ Drivers too but it limits the programmable buttons and the scroll wheel etc, which is the only reason to use the Logitech Software I find.

    KB
      My System SpecsSystem Spec


  4. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,209
    Windows 10 IoT
       28 Aug 2016 #14

    Yeah, my M570's only have 2 extra buttons for forward and back. I never reprogram them so I don't usually bother with Setpoint. Plus I've had issues with Setpoint in Windows 10 in the past. It would delay shutdown. I hope you get your issue sorted, it sucks when one of your favorite peripherals isn't working like it should.
      My System SpecsSystem Spec


  5. Joined : Dec 2015
    Posts : 111
    windows 10 64-bit
       03 Sep 2016 #15

    Came across this Logitech instruction to recapture the Mouse tab (Keyboard and Mouse tabs are missing in SetPoint - Logitech Support Article). When I tried to rename the xxxxx.sys file to xxxxx.bak, I wasn't allowed to. Furthermore, I could not even change permissions in the file's properties. If you think this fix may work and not screw up the computer, perhaps you could help me make the change to "bak?"
    Last edited by flycaster; 04 Sep 2016 at 07:44.
      My System SpecsSystem Spec


  6. Joined : Jun 2016
    Posts : 1,386
    Win10 1607
       03 Sep 2016 #16

    You would need to take Ownership of the file and then change the permissions..... however that is WinXP advice.....

    Did you try what I said earlier in the Thread ? ie install the very earliest (6.30?) version of set point 1st and then upgrade? it's what worked for me.

    The old advice (before win10) has always been to install Setpoint 4.XXX if this issue occurs with Setpoint 6.xxx, and then update to newer versions , so I tried that theory with the earliest 6.XX version.

    These are some other Logitech files I have gathered on there Forums that might help get the tab and images back ,though I don't think it's what worked for me this time.

    Logitech Mouse Images.zip
      My System SpecsSystem Spec


  7. Joined : Dec 2015
    Posts : 111
    windows 10 64-bit
       06 Sep 2016 #17

    When I first tried Keyboard and Mouse tabs are missing in SetPoint - Logitech Support Article, I almost crashed the computer because I didn't follow instructions properly. So, when I figured that one out, I redid the procedure, but this time correctly. However, still no mouse tab....
      My System SpecsSystem Spec


  8. Joined : Jun 2016
    Posts : 1,386
    Win10 1607
       06 Sep 2016 #18

    did you try advice above.... ????
      My System SpecsSystem Spec


  9. Joined : Dec 2015
    Posts : 111
    windows 10 64-bit
       06 Sep 2016 #19

    Kbird said: View Post
    did you try advice above.... ????
    Yeah, did it all. Loaded on and earlier version...no mouse tab. Installed the latest version over it...no mouse tab. Did what Logitech suggest, with and without loading on an earlier version...still no mouse tab. Hate to say how many hours I've spent on MS's screw up (and I'm too embarrassed to do so, so I won't.) But, I my estimation, the TRB=22 Cordless optical Trackman (with all its customization,) is the best of the best mouse (nothing else out there like it) and I hate to give up on it
      My System SpecsSystem Spec


  10. Joined : Jun 2016
    Posts : 1,386
    Win10 1607
       06 Sep 2016 #20

    None of the Files in the Zip helped either I guess ? sorry been about 4-5 months and I can't remember exactly what I did on Ten to get it Working.

    You didn't install Logitech Options did you for another Mouse or something? that totally screwed up setpoint when I installed it 1st then setpoint.

    Yep I love it too so have had to screw with this a few times a year for at least 5 yrs ? now....
      My System SpecsSystem Spec


 
Page 2 of 5 FirstFirst 1234 ... LastLast


Similar Threads
Thread Forum
Mouse drag loses focus since Windows 10 v1607 update
Dear all, I have this issue that has been driving me nuts ever since I upgraded my Windows 10 Pro x64 to v1607 (from 1507) recently. It's a desktop PC with a trusty old Logitech MX518 plugged into a back panel USB 2.0 slot. Same symptom with or...
General Support
Problems connecting to wireless printer
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers...
Network and Sharing
Logitech Setpoint Software & Wireless Keyboard Problem
Hello, On my old PC running W7, I used it with a Logitech MK 300 wireless Keyboard and with atheir Wireless Mouse. Worked just fine. Would like to use them both with my new W10 PC. The Wireless Mouse works just fine. I cannot get the...
Drivers and Hardware
Logitech K270 wireless keyboard - can't type letters
This is a wireless keyboard and mouse wirelessly connected via a Logitech USB unifying receiver. The mouse works fine, and strangely the hot keys on the keyboard (mail, calculator, sleep etc) work fine. However, after booting into W10 the normal...
Drivers and Hardware
Microsoft Wireless Display Adapter (Miracast) Problems?
Haven't found other threads dealing with this, but I'm trying to figure out if there's a way to get my wireless display adapter working properly in Win10 (worked great with my Surface Pro 3 with Win 8.1 - I'm on Win 10 build 9926 at the moment). ...
Drivers and Hardware
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:51.
Find Us
Twitter Facebook Google+



Windows 10 Forums