New
#11
I've seen such problems where the user didn't go into Device and Printers and set it as Default then check in programs used and the File menu to select that printer.
I've seen such problems where the user didn't go into Device and Printers and set it as Default then check in programs used and the File menu to select that printer.
It's set as the default
Hi,
{I guess we have hijacked the thread from the OP, who has never returned. Be that as it may....}
@robdam1001:
What security program (anti-virus) are you running on this system?
In particular, is it Kaspersky?
Thanks,
MM
Hmm, OK.
I have an HP 8600 AIO installed on Win10 (and 2 Win7 boxes), running Kaspersky.
There is an advanced setting in Kaspersky under networking that must be set to "local" or "trusted" in order for printing to occur.
You might want to check ESET NOD 32 for a similar network setting.
Also, you can connect the HP AIO to multiple computers different ways (USB (local), ethernet and/or wifi).
I see that you've already done some troubleshooting on that end.
But, one thing to note: if you use "network" connection via ethernet, either directly to the computer or to a router, you need to turn off the Wifi in the printer settings (from the dashboard setup menu directly on the printer itself).
You can use USB + ethernet, or USB + wifi, or ONLY wifi/ethernet/USB.
But you cannot use both ethernet and wifi at the same time.
So, you might want to check this, although the printer and/or software GUI should warn you if you try to do both....
One other thing, if we don't end up sorting this here. I have found HP phone support for these sorts of things to be quite good. If the printer is under warranty, you might give them a call. They can walk you through it, with or without a remote screen share.
You'll need the printer model AND serial number when you call. I can dig up the toll-free number, if you need it.
They also have good tutorials and videos here:
http://support.hp.com/us-en/drivers
Let us know how it goes,
MM
Perhaps the darn thing is defective after all.
Please let us know how it goes.
MM
The printer isn't defective. It works perfectly fine with my android devices and Windows 7 computers.
Try disabling the firewall and see if it will print.