I don't think my new hard drive is configured correctly


  1. Posts : 51
    Windows 10 Home Ver 1803 Build 17134.228
       #1

    I don't think my new hard drive is configured correctly


    I installed a new 1TB HDD, 7200rpm in my laptop. I upgraded to Windows 10 in December. Looking in Disk Management I only have a Disk 0 with what appears to be 4 partitions. the first one is 1.46GB labeled Healthy (Active, Recovery Partition)but under Capacity has 1.45GB & then under Free Space has 1.46GB 100% free, no file system, the second is Volume (C: ) 915.48GB Capacity, NTFS, Free Space 775.89GB 85% free, Healthy (Boot, Page File, Crash Dump, Primary Partition), the third is 450MB Capacity with 450MB free space 100% free with no file system, Healthy, (Recovery Partition) & the fourth is 14.13GB Capacity, 14.13GB free space 100% free with no file system, Healthy, (Primary Partition). This just doesn't look right to me. Is it? If not, what can I do about it?

    Attachment 72322

    TOSHIBA LAPTOP SPECS

    SYSTEM MODEL
    Toshiba Satellite L775D PSK4OU-OOGOOP

    OPERATING SYSTEM
    Windows 10 Home x64 Version 1511 Build 10586.71 IE Version 11.63.10586.0CO
    Chrome Version 48.0.2564.103 m
    Boot Mode: Legacy BIOS in UEFI
    Secure boot not supported

    MAIN CIRCUIT BOARD
    Board: Pegatron Corporation TKBSS 1.50
    Bus Clock: 100 MHz
    UEFI: American Megatrends Inc. 1.50 10/18/2011

    PROCESSOR

    1.40 Gigahertz AMD A6-34OOM

    APU with Radeon HD graphics
    Graphics Chipset:AMD Radeon(TM) HD 6520G512
    4096 primary memory cache

    4096 secondary memory cache
    64=bit ready
    BIOS Version:012.043.000.001
    BIOS Part Number:BR40547.bin
    BIOS Date:04/07/2011
    DRIVES
    915.418GB Capacity hard drive775.89 GB hard drive free
    HGST HARD DRIVE - 7K1000-1000 - 1TB 7200RPM, Drive 0 P/N: H2T10003272S, SATA 6 0G6/S, TYPE: TSTSAF100, P/N: W:0J22423, MLC: DA6326
    HL-DT=ST BDDVDRW CT31F Optical Drive
    PCI to USB host controller 3x

    Standard open HCD USB host Controller 3x

    MEMORY MODULES
    8GB RAM

    LOCAL DRIVE VOLUMES
    C: NTSF on drive O 622.92 GB

    CONTROLLERS
    ATA Channel 0
    ATA Channel 1
    Standard dual channel PCI IDE Controller
    Standard SATA AHCI Controller

    BUS ADAPTERS
    MS Storage spaces controller.
    Standard Enhanced PCI to USB Host
    Last edited by mkj307; 30 Mar 2016 at 23:57.
      My Computers


  2. Posts : 564
    Windows 10 Pro x64 21H1
       #2

    Your Hard Disk is configured correctly. Disk management will not show those partitions using up space, and all of those partitions are correct. After upgrading to Windows 10 it creates new recovery partitions as the previous recovery partition won't work with Windows 10.

    Everything looks good to me.

    I'm just unsure of the partition at the end, the 14.13GB one. That may be an old recovery partition for an old OS perhaps
      My Computer


  3. Posts : 51
    Windows 10 Home Ver 1803 Build 17134.228
    Thread Starter
       #3

    Thank you. That's a relief!
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:33.
Find Us




Windows 10 Forums