SATA III SSD shown as SATA II

Page 1 of 4 123 ... LastLast

  1. Posts : 30
    Windows 10 Home
       #1

    SATA III SSD shown as SATA II


    Hi everyone.
    I have just noticed that my Intel 520 SSD Drive is showing as SATA II drive. Now, I am aware that it is connected to a SATA2_0 port controlled by native Intel SATA II controller on my mobo and current speed should be 3gb/s. Why does it say though that the max transfer speed this SSD Drive is capable of is 3gb/s instead of 6gb/s while the other Crusial C300 SSD is shown correctly as "SATA 6Gb/s @ 3/Gb/s".
    Also I wanted to clarify is it better to connect my SSD with Windows 10 on it to an Intel's II(3gb/s) port or Marvell's SATA III(6gb/s)? Some reviews on the Internet say that it's always better to use native ports, Intel SATA II in my case. How big is the actual difference in time of let's say Windows start up/opening an application when running through SATA II compared to SATA III. SATA III SSD shown as SATA II-33.jpgSATA III SSD shown as SATA II-11.jpg
      My Computer


  2. Posts : 3,264
    Windows 11 Pro 64 bit Version 21H2
       #2

    You have 2 controllers 1 has 6 x SATA II other has 2 x SATA III. Not sure how it is hooked
    Ever look at your board ? http://www.gigabyte.com/products/pro...px?pid=3450#sp

    Both SSD are SATA III should be on the Marvel SATA port then.
      My Computer


  3. Posts : 30
    Windows 10 Home
    Thread Starter
       #3

    jds63 said:
    You have 2 controllers 1 has 6 x SATA II other has 2 x SATA III. Not sure how it is hooked
    Ever look at your board ? http://www.gigabyte.com/products/pro...px?pid=3450#sp

    Both SSD are SATA III should be on the Marvel SATA port then.
    I also have 2 x SATA 3Gb/s connectors (GSATA2_8, GSATA2_9).
    As I stated earlier it is connected to a SATA2_0
    SATA III SSD shown as SATA II-22.jpg
      My Computer


  4. Posts : 3,264
    Windows 11 Pro 64 bit Version 21H2
       #4

    Can not get best performance from a SATA III device hooked to a SATA II port. Also need correct SATA Controller drivers and BIOS enabled to AHCI will help to. So should be on 7 & 6
      My Computer


  5. Posts : 30
    Windows 10 Home
    Thread Starter
       #5

    jds63 said:
    Can not get best performance from a SATA III device hooked to a SATA II port. Also need correct SATA Controller drivers and BIOS enabled to AHCI will help to. So should be on 7 & 6
    Okay so, first I enabled Marvell in BIOS and set it to AHCI, then in Device Manager Generic Intel AHCI Controller appeared. I shut down PC, reconnected my SSD to one of the Marvell's ports and tried to boot up windows - windows did not boot up. I reconnected SSD back to Intel and boot up Windows. After that I took my CD that came with the mobo and installed "Marvell 91xx driver" as shown in my Control Panel Programs and Features, restarted PC, and Generic Intel AHCI Controller under IDE ATA/ATAPI disappeared but appeared under Storage Controllers as "Marvell 91xx SATA 6G Controller". Shut down PC, reconnected SSD back to Marvell and was not able to boot up windows again...
      My Computer

  6.   My Computer


  7. Posts : 30
    Windows 10 Home
    Thread Starter
       #7

    It does not work. I already am in AHCI, I am trying to switch from AHCI Intel SATA II to AHCI Marvell SATA III which was disabled at the moment of windows installation! To get 6gb/s speed.
      My Computer


  8. Posts : 3,264
    Windows 11 Pro 64 bit Version 21H2
       #8

    Buzzik said:
    It does not work. I already am in AHCI, I am trying to switch from AHCI Intel SATA II to AHCI Marvell SATA III which was disabled at the moment of windows installation! To get 6gb/s speed.
    As said you need to hook them to the SATA III Marvel on the board as shown before.Gigabytes website shows only up to Windows 7, choose 64bit or 32bit for the system.

    SATA III SSD shown as SATA II-untitled.jpg
      My Computer


  9. Posts : 30
    Windows 10 Home
    Thread Starter
       #9

    jds63 said:
    As said you need to hook them to the SATA III Marvel on the board as shown before.Gigabytes website shows only up to Windows 7, choose 64bit or 32bit for the system.
    But preinstall drivers should be installed during windows installation isn't it, or there is no difference?
      My Computer


  10. Posts : 204
    Win 10(64bit)
       #10

    Isn't Marvel meant to be not a great controller, Intel are better
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:04.
Find Us




Windows 10 Forums