New
#11
those are the benchmarks on SATA2. as you see write speed is higher than on SATA3 . only read speed is higher on SATA3.im confused dunno what to do
SSD not working
-
-
New #12
Yes you showed both benchmarks. Basically should be using the SATA 3 for the SSD's. I did not look well at your motherboard to see how many ports what they should be used for as some are and can be different more for optical drives.
-
New #13
This the exact board http://www.gigabyte.com/products/pro...px?pid=3449#sp
Has 2 SATA 6 Gb/s ports which are probably the Marvell as said
-
New #14
yes that's the board.Yep 2 Marvell I'm traveling between Intel sata2 and marvel sata3 till I try to land somewhere
hahaha :)
-
New #15
Bookmark that web page, download manual make sure hooked to right connectors believing work best on SATA 3 and enter the BIOS set to AHCI mode. Also it is an older board no available drivers for Windows 10 for the system, SATA Controller drivers, Chipset...unless Windows 10 Downloaded or have updates for them, can be another reason.
-
New #16
did that already. i know i cant get the full speed of drives cause board is old but sata2 and sata3 controllers have almost same speed.
well i will keep it in sata3 controller till i upgrade my system hardware and get a newer board cpu etc
thanks for your time
:)
-
New #17
This is SSD Gurus report on the OCZ ARC 100 (via USB Docking station):
Note: All references are to ACS-2 Specification
Legend: F/V/X - Fixed/variable/undefined Content
(O)/(M) - Mandatory/optional requirement
Word 00: (M) 0000h General configuration
F 0b 15 0 = ATA device
X 0000000b 14:8 Retired
F 00b 7:6 Obsolete
X 000b 5:3 Retired
V 0b 2 Response incomplete
X 0b 1 Retired
0b 0 Reserved
Word 01: 3fffh Obsolete
Word 02: (O) c837h Specific configuration
Word 03: (X) 0010h Obsolete
Word 04: (X) 0000h 0000h Retired
Word 06: (X) 003fh Obsolete
Word 07: 0000h 0000h Reserved for assignment by the CompactFlashTM Association
Word 09: (X) 0000h Retired
Word 10: (M) Serial number (20 ASCII characters)
F 4132h 324ch 3130h 3631h 3533h 3130h 3035h 3731h 3520h 2020h
A22L1061531005715
Word 20: X 0000h ffffh Retired
Word 22: X 3000h Obsolete
Word 23: (M) Firmware revision (8 ASCII characters)
F 312eh 3031h 2020h 2020h
1.01
Word 27: (M) Model number (40 ASCII characters)
F 4f43h 5a2dh 4152h 4331h 3030h 2020h 2020h 2020h 2020h 2020h
2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h 2020h
OCZ-ARC100
Word 47: (M) 8001h
F 15:8 80h
F 7:0 00h = Reserved
01h-FFh = Maximum number of logical sectors that shall be transferred per DRQ data block on READ/WRITE MULTIPLE commands
Word 48: (0) 0000h Trusted Computing feature set options
F 15 Shall be cleared to zero
F 14 Shall be set to zero
13:1 Reserved for the Trusted Computing Group
F 0 1=Trusted Computing feature set is supported
Word 49: (M) 2f00h Capabilities
F 15:14 Reserved for the IDENTIFY PACKET DEVICE command.
F 1b 13 1 = Standby timer values as specified in this standard are supported
0 = Standby timer values shall be managed by the device
F 0b 12 Reserved for the IDENTIFY PACKET DEVICE command.
F 1b 11 1 = IORDY supported
0 = IORDY may be supported
F 1b 10 1 = IORDY may be disabled
F 1b 9 1 = LBA supported
F 1b 8 1 = DMA supported
X 00000000b 7:0 Retired
Word 50: (M) 4000 Capabilities
F 0b 15 Shall be cleared to zero.
F 1b 14 Shall be set to one.
F 000000000000b 13:2 Reserved.
X 0b 1 Obsolete
F 0b 0 Shall be set to one to indicate a device specific Standby timer value
Word 51: X 0200h 0200h Obsolete
Word 53: (M) 0007h
F 0000000000000b 15:3 Reserved
F 1b 2 1 = the fields reported in word 88 are valid
0 = the fields reported in word 88 are not valid
F 1b 1 1 = the fields reported in words (70:64) are valid
0 = the fields reported in words (70:64) are not valid
X 1b 0 Obsolete
Word 54: Obsolete
X 3fffh 0010h 003fh fc10h
Word 59: (M) 0101h
F 0000000b 15:9 Reserved
V 1b 8 1 = Multiple sector setting is valid
V 01h 7:0 xxh = Current setting for number of logical sectors that shall be transferred per DRQ data block on READ/WRITE Multiple commands
Word 60: (M) ffffh 0fffh Total number of user addressable logical sectors (DWord)
Word 62: X 0000h Obsolete
Word 63: (M) 0007h
F 00000b 15-11 Reserved
V 0b 10 1 = Multiword DMA mode 2 is selected
0 = Multiword DMA mode 2 is not selected
V 0b 9 1 = Multiword DMA mode 1 is selected
0 = Multiword DMA mode 1 is not selected
V 0b 8 1 = Multiword DMA mode 0 is selected
0 = Multiword DMA mode 0 is not selected
F 00000b 7:3 Reserved
F 1b 2 1 = Multiword DMA mode 2 and below are supported
F 1b 1 1 = Multiword DMA mode 1 and below are supported
F 1b 0 1 = Multiword DMA mode 0 is supported
Word 64: (M) 0003h
F 15:8 Reserved
F 7:0 PIO modes supported
Word 65: (M) 0078h Minimum Multiword DMA transfer cycle time per word
F 15:0 Cycle time in nanoseconds
Word 66: (M) 0078h Manufacturer's recommended Multiword DMA cycle time
F 15:0 Cycle time in nanoseconds
Word 67: (M) 0078h Minimum PIO transfer cycle time without flow control
F 15:0 Cycle time in nanoseconds
Word 68: (M) 0078h Minimum PIO transfer cycle time with IORDY flow control
F 15:0 Cycle time in nanoseconds
Word 69: (O) 0000h Additional Supported
F 0b 15 1 = CFast Specification Support
F 0b 14 1 = Deterministic read after TRIM is supported
F 0b 13 1 = Long Physical Sector Alignment Error Reporting Control is supported
F 0b 12 1 = DEVICE CONFIGURATION IDENTIFY DMA and
DEVICE CONFIGURATION SET DMA are supported
F 0b 11 1 = READ BUFFER DMA is supported
F 0b 10 1 = WRITE BUFFER DMA is supported
F 0b 9 1 = SET MAX SET PASSWORD DMA and
SET MAX UNLOCK DMA are supported
F 0b 8 1 = DOWNLOAD MICROCODE DMA is supported
F 00000000b 7:0 Reserved
Word 70: X 0000h Reserved
Word 71: Reserved for IDENTIFY PACKET DEVICE command.
0000h 0000h 0000h 0000h
Word 75: (O) 001fh Queue depth
00000000000b 15:5 Reserved
F 11111b 4:0 Maximum queue depth - 1
Word 76: (O) 030eh Serial ATA capabilities
000b 15:13 Reserved
F 0b 12 Supports Native Command Queuing priority information
F 0b 11 Supports Unload while NCQ commands outstanding
F 0b 10 Supports Phy event counters
F 1b 9 Supports receipt of host initiated power management requests
F 1b 8 Supports native command queuing
0000b 7:4 Reserved for Serial ATA
F 1b 3 1 = Supports Serial ATA Gen-3 speed (6.0Gbps)
F 1b 2 1 = Supports Serial ATA Gen-2 speed (3.0Gbps)
F 1b 1 1 = Supports Serial ATA Gen-1 speed (1.5Gbps)
F 0b 0 Shall be cleared to zero
Word 77: 0004h Reserved for Serial ATA future definition
Word 78: (O) 0044h Serial ATA features supported
000000000b 15:7 Reserved
F 1b 6 1 = supports software settings preservation
F 0b 5 1 = supports Asynchronous notification
F 0b 4 1 = supports in-order data delivery
F 0b 3 1 = supports dev initiate interface power management
F 1b 2 1 = supports DMA Setup Auto-Activate optimization
F 0b 1 1 = supports non-zero buffer offsets in DMA Setup FIS
F 0b 0 Reserved (set to 0)
Word 79: (0) 0040h Serial ATA features enabled
000000000b 15:7 Reserved
V 1b 6 1 = software settings preservation enabled
V 0b 5 1 = Asynchronous notification enabled
V 0b 4 1 = in-order data delivery enabled
V 0b 3 1 = device initiating interface power management enabled
V 0b 2 1 = DMA Setup Auto-Activate optimization enabled
V 0b 1 1 = non-zero buffer offsets in DMA Setup FIS enabled
F 0b 0 Reserved (set to 0)
Word 80: (M) 01e0h Major version number
0000h or FFFFh = device does not report version
0000000b 15:9 Reserved
F 1b 8 1 = supports ATA8-ACS
F 1b 7 1 = supports ATA/ATAPI-7
F 1b 6 1 = supports ATA/ATAPI-6
F 1b 5 1 = supports ATA/ATAPI-5
F 0b 4 1 = supports ATA/ATAPI-4
X 0b 3 Obsolete
X 0b 2 Obsolete
X 0b 1 Obsolete
0b 0 Reserved
Word 81: (M) 0000h Minor revision number
F 0000h or FFFFh = device does not report version
F 0001h-000Ch = Obsolete
F 000Dh = ATA/ATAPI-4 X3T13 1153D revision 6
F 000Eh = ATA/ATAPI-4 T13 1153D revision 13
F 000Fh = ATA/ATAPI-4 X3T13 1153D revision 7
F 0010h = ATA/ATAPI-4 T13 1153D revision 18
F 0011h = ATA/ATAPI-4 T13 1153D revision 15
F 0012h = ATA/ATAPI-4 published ANSI NCITS 317-1998
F 0013h = ATA/ATAPI-5 T13 1321D revision 3
F 0014h = ATA/ATAPI-4 T13 1153D revision 14
F 0015h = ATA/ATAPI-5 T13 1321D revision 1
F 0016h = ATA/ATAPI-5 published ANSI NCITS 340-2000
F 0017h = ATA/ATAPI-4 T13 1153D revision 17
F 0018h = ATA/ATAPI-6 T13 1410D revision 0
F 0019h = ATA/ATAPI-6 T13 1410D revision 3a
F 001Ah = ATA/ATAPI-7 T13 1532D revision 1
F 001Bh = ATA/ATAPI-6 T13 1410D revision 2
F 001Ch = ATA/ATAPI-6 T13 1410D revision 1
001Dh Reserved
F 001Eh = ATA/ATAPI-7 T13 1532D revision 0
F 001Fh-0020h = Reserved
F 0021h = ATA/ATAPI-7 T13 1532D revision 4a
F 0022h = ATA/ATAPI-6 published, ANSI INCITS 361-2002
F 0023h-FFFFh Reserved
Word 82: (M) 346bh Commands and feature sets supported
X 0b 15 Obsolete
F 0b 14 1 = NOP command supported
F 1b 13 1 = READ BUFFER command supported
F 1b 12 1 = WRITE BUFFER command supported
X 0b 11 Obsolete
F 1b 10 1 = Host Protected Area feature set supported
F 0b 9 1 = DEVICE RESET command supported
F 0b 8 1 = SERVICE interrupt supported
F 0b 7 1 = release interrupt supported
F 1b 6 1 = look-ahead supported
F 1b 5 1 = write cache supported
F 0b 4 Shall be cleared to zero to indicate that the PACKET feature set is not
supported
F 1b 3 1 = mandatory Power Management feature set supported
F 0b 2 Obsolete
F 1b 1 1 = Security Mode feature set supported
F 1b 0 1 = SMART feature set supported
Word 83: (M) 7d01h Commands and feature sets supported
F 0b 15 Shall be cleared to zero
F 1b 14 Shall be set to one
F 1b 13 1 = FLUSH CACHE EXT command supported
F 1b 12 1 = mandatory FLUSH CACHE command supported
F 1b 11 1 = Device Configuration Overlay feature set supported
F 1b 10 1 = 48-bit Address feature set supported
F 0b 9 1 = Automatic Acoustic Management feature set supported
F 1b 8 1 = SET MAX security extension supported
F 0b 7 See Address Offset Reserved Area Boot NCITS TR27:2001
F 0b 6 1 = SET FEATURES subcommand required to spin-up after power-up
F 0b 5 1 = Power-Up In Standby features set supported
X 0b 4 Obsolete
F 0b 3 1 = Advanced Power Management feature set supported
F 0b 2 1 = CFA feature set supported
F 0b 1 1 = READ/WRITE DMA QUEUED supported
F 1b 0 1 = DOWNLOAD MICROCODE command supported
Word 84: (M) 4122h Commands and feature sets supported
F 0b 15 Shall be cleared to zero
F 1b 14 Shall be set to one
F 0b 13 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported
F 0b 12 Reserved for technical report INCITS TR-37-2004 (TLC)
F 0b 11 Reserved for technical report INCITS TR-37-2004 (TLC)
X 00b 10:9 1 = Obsolete
F 1b 8 1 = 64-bit Word wide name supported
F 0b 7 1 = WRITE DMA QUEUEDFUA EXT command supported
F 0b 6 1 = WRITE DMA FUA EXT and WRITE MULTI FUA EXT commands supported
F 1b 5 1 = General Purpose Logging feature set supported
F 0b 4 1 = Streaming feature set supported
F 0b 3 1 = Media Card Pass Through Command feature set supported
F 0b 2 1 = Media serial number supported
F 1b 1 1 = SMART self-test supported
F 0b 0 1 = SMART error logging supported
Word 85: (M) 3469h Commands and feature sets supported or enabled
X 0b 15 Obsolete
F 0b 14 1 = NOP command supported
F 1b 13 1 = READ BUFFER command supported
F 1b 12 1 = WRITE BUFFER command supported
X 0b 11 Obsolete
V 1b 10 1 = Host Protected Area feature set enabled
F 0b 9 1 = DEVICE RESET command supported
V 0b 8 1 = SERVICE interrupt enabled
V 0b 7 1 = release interrupt enabled
V 1b 6 1 = look-ahead enabled
V 1b 5 1 = write cache enabled
F 0b 4 Shall be cleared to zero to indicate that the PACKET feature set is not supported.
F 1b 3 1 = Power Management feature set enabled
X 0b 2 Obsolete
V 0b 1 1 = Security Mode feature set enabled
V 1b 0 1 = SMART feature set enabled
Word 86: (M) bc01h Commands and feature sets supported or enabled
F 1b 15 1 = Words 120-119 are valid
0b 14 1 = Reserved
F 1b 13 1 = FLUSH CACHE EXT command supported
F 1b 12 1 = FLUSH CACHE command supported
F 1b 11 1 = DCO feature set is supported
F 1b 10 1 = 48-bit Address features set supported
V 0b 9 1 = Automatic Acoustic Management feature set enabled
V 0b 8 1 = SET MAX security enabled by SET MAX SET PASSWORD
0b 7 Reserved for address Offset Reserved Area Boot,INCITS TR27:2001
F 0b 6 1 = SET FEATURES subcommand required to spin-up after power-up
V 0b 5 1 = Power-Up In Standby features set enabled
X 0b 4 Obsolete
V 0b 3 1 = Advanced Power Management feature set enabled
F 0b 2 1 = CFA feature set supported
F 0b 1 1 = READ/WRITE DMA QUEUED command supported
F 1b 0 1 = DOWNLOAD MICROCODE command supported
Word 87: (M) 4122h Commands and feature sets supported or enabled
F 0b 15 Shall be cleared to zero
F 0b 14 Shall be set to one
F 0b 13 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported
0b 12 Reserved for technical report- INCITS tr-37-2004 (TLC)
0b 11 Reserved for technical report- INCITS TR-37-2004 (TLC)
X 00b 10:9 Obsolete
F 1b 8 1 = 64 bit Word wide name supported
F 0b 7 1 = WRITE DMA QUEUED FUA EXT command supported
F 0b 6 1 = WRITE DMA FUA EXT and WRITE MULTI FUA EXT commands
supported
F 1b 5 1 = General Purpose Logging feature set supported
X 0b 4 Obsolete
V 0b 3 1 = Media Card Pass Through Command feature set supported
V 0b 2 1 = Media serial number is valid
F 1b 1 1 = SMART self-test supported
F 0b 0 1 = SMART error logging supported
Word 88: (O) 207fh Ultra DMA modes
0b 15 Reserved
V 0b 14 1 = Ultra DMA mode 6 is selected
0 = Ultra DMA mode 6 is not selected
V 1b 13 1 = Ultra DMA mode 5 is selected
0 = Ultra DMA mode 5 is not selected
V 0b 12 1 = Ultra DMA mode 4 is selected
0 = Ultra DMA mode 4 is not selected
V 0b 11 1 = Ultra DMA mode 3 is selected
0 = Ultra DMA mode 3 is not selected
V 0b 10 1 = Ultra DMA mode 2 is selected
0 = Ultra DMA mode 2 is not selected
V 0b 9 1 = Ultra DMA mode 1 is selected
0 = Ultra DMA mode 1 is not selected
V 0b 8 1 = Ultra DMA mode 0 is selected
0 = Ultra DMA mode 0 is not selected
0b 7 Reserved
F 1b 6 1 = Ultra DMA mode 6 and below are supported
F 1b 5 1 = Ultra DMA mode 5 and below are supported
F 1b 4 1 = Ultra DMA mode 4 and below are supported
F 1b 3 1 = Ultra DMA mode 3 and below are supported
F 1b 2 1 = Ultra DMA mode 2 and below are supported
F 1b 1 1 = Ultra DMA mode 1 and below are supported
F 1b 0 1 = Ultra DMA mode 0 is supported
Word 89: (O) 0000h Time required for security erase unit completion
00h 15:8 Reserved
F 00h 7:0 Time required for Normal Erase mode SECURITY ERASE UNIT command
Word 90: (O) 0000h Time required for Enhanced security erase completion
00h 15:8 Reserved
F 00h 7:0 Time required for Enhanced Erase mode SECURITY ERASE UNIT command
Word 91: (O) 0000h Current APM level value (Advanced Power Management)
Word 92: (O) fffeh Master Password Identifier
Word 93: (M) 0000h Hardware reset result. The contents of bits (12-0) of this world shall change only during the execution of a hardware reset (7.18.7.47)
F 0b 15 Shall be cleared to zero.
F 0b 14 Shall be set to one.
V 0b 13 1 = dev detected CBLID- above ViHB
0 = dev detected CBLID- below ViL
V 00000b 12:8 Device 1 HW reset result. Device 0 shall clear these bits to 0.
Device 1 shall set these bits as follows:
12 Reserved.
11 0 = Device 1 did not assert PDIAG-.
1 = Device 1 asserted PDIAG-.
V 00b 10:9 These bits indicate how Dev 1 determined device number:
00 = Reserved.
01 = a jumper was used.
10 = the CSEL signal was used.
11 = some other method was used or the method is unknown
0b 8 Shall be set to one.
7:0 Device 0 hardware reset result. Device 1 shall clear these bits to 0.
Device 0 shall set these bits as follows:
0b 7 Reserved.
F 0b 6 0 = Device 0 not respond when Device 1 is selected.
1 = Device 0 responds when Device 1 is selected.
V 0b 5 0 = Device 0 did not detect assertion of DASP-.
1 = Device 0 detected assertion of DASP-.
V 0b 4 0 = Device 0 did not detect assertion of PDIAG-.
1 = Device 0 detected assertion of PDIAG-.
V 0b 3 0 = Device 0 failed diagnostics.
1 = Device 0 passed diagnostics.
V 00b 2:1 These bits indicate how Device 0 determined device number:
00 = Reserved.
01 = a jumper was used.
10 = the CSEL signal was used.
11 = some other method was used or the method unknown.
F 0b 0 Shall be set to one.
Word 94: (O) 0000h Current AAM value (see 7.18.7.48)
F 00h 15:8 Vendor's recommended acoustic management value.
V 00h 7:0 Current automatic acoustic management value.
Word 95: (O) 0000h Stream Minimum Request Size
Word 96: (O) 0000h Streaming Transfer Time - DMA
Word 97: (O) 0000h Streaming Access Latency - DMA and PIO
Word 98: (O) 0000h 0000h Streaming Performance Granularity (DWord)
Word 100: (O) Total Number of User Addressable Logical Sectors for 48-bit commands (QWord)
V 44b0h 1bf2h 0000h 0000h
Word 104: (O) 0000h Streaming Transfer Time - PIO (see 7.18.7.54)
Word 105: 0000h Reserved
Word 106: (O) 4000h Physical sector size / Logical Sector Size
F 0b 15 Shall be cleared to zero
F 1b 14 Shall be set to one
F 0b 13 1 = Device has multiple logical sectors per physical sector.
F 0b 12 1 = Device Logical Sector Longer than 256 Words
00000000b 11:4 Reserved
F 0000b 3:0 2^x logical sectors per physical sector
Word 107: (O) 0000h Inter-seek delay for ISO-7779 standard acoustic testing in microseconds
Word 108: (M) World wide name
F e8-3fffffffa-97 1000838fffffff8c IeeeOUI-UniqueID
Word 112: (O) Reserved for 128 bit world wide name extension to 128 bits
0000h 0000h 0000h 0000h
Word 116: (O) 0000h Reserved for INCITS TR-37-2004
Word 117: (O) 0000h 0000h Logical sector size (DWord) (see 7.18.7.61)
Word 119: (M) 4010h Commands and feature sets supported (Continued from words 82..84)
F 0b 15 Shall be cleared to zero
F 1b 14 Shall be set to one
00000000b 13:6 Reserved
F 0b 5 1 = The Free-fall Control feature set is supported
F 1b 4 1 = The DOWNLOAD MICROCODE command with mode 3 is supported
F 0b 3 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported
F 0b 2 1 = The WRITE UNCORRECTABLE EXT command is supported
F 0b 1 1 = The Write-Read-Verify feature set is supported
0b 0 Reserved for DDT
Word 120: (M) 4010h Commands and feature sets supported or enabled (Continued from words 85..87)
F 0b 15 Shall be cleared to zero
F 1b 14 Shall be set to one
00000000b 13:7 Reserved
V 0b 6 1 = Extended Status Reporting feature set is supported
V 0b 5 1 = The Free-fall Control feature set is enabled
F 1b 4 1 = The DOWNLOAD MICROCODE command with mode 3 is supported
F 0b 3 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT commands are supported
F 0b 2 1 = The WRITE UNCORRECTABLE EXT command is supported
V 0b 1 1 = The Write-Read-Verify feature set is enabled
0b 0 Reserved for DDT
Word 121: Reserved for expanded supported and enable settings
0000h 0000h 0000h 0000h 0000h 0000h
Word 127: 0000h Obsolete
Word 128: (O) 0001h Security status
0000000b 15:9 Reserved
V 0b 8 Master Password Capability 0 = High, 1 = Maximum
00b 7:6 Reserved
F 0b 5 1 = Enhanced security erase supported
V 0b 4 1 = Security count expired
V 0b 3 1 = Security frozen
V 0b 2 1 = Security locked
V 0b 1 1 = Security enabled
F 1b 0 1 = Security supported
Word 129: Vendor specific
5448h 3538h 5445h 4737h 4444h 4b42h 4134h 435fh
3531h 324dh 425fh 3078h 3030h 3030h 3030h 3030h
4646h 4646h 4646h 4646h 5f41h 5243h 3130h 305fh
4246h 3320h 2020h 2020h 2020h 2020h 2020h
Word 160: (O) 0000h CFA power mode (see 7.18.7.68)
F 0b 15 Word 160 supported
0b 14 Reserved
F 0b 13 CFA power mode 1 is required for one or more commands
implemented by the device
V 0b 12 CFA power mode 1 disabled
F 000000000000b 11:0 Maximum current in ma
Word 161: Reserved for the CompactFlashTM Association
0000h 0000h 0000h 0000h 0000h 0000h 0000h
Word 168: (O) 0000h See 7.18.7.70
000000000000b 15:4 Reserved
F 0000b 3:0 Device Nomimal Form Factor
Word 169: (O) 0001h DATA SET MANAGEMENT is supported (see 7.18.7.71)
000000000000000b 15:1 Reserved
F 1b 0 1 = th Trim bit in the DATA SET MANAGEMENT is supported
Word 170: (O) Addtional Product Identify (ATA String) (see 7.18.7.72)
0000h 0000h 0000h 0000h
Word 174: 0000h 0000h Reserved
Word 176: (O) Current media serial number (60 ASCII characters)
0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
0000h 0000h 0000h 0000h 0000h 0000h
Word 206: (O) 0000h SCT Command Transport
X 0000b 15:12 Vender Specific
000000b 11:6 Reserved
F 0b 5 SCT Command Transport Data Tables support
F 0b 4 SCT Command Transport Features Control supported
F 0b 3 SCT Command Transport Error Recovery control supported
F 0b 2 SCT Command Transport Write Same supported
F 0b 1 SCT Command Transport Long Sector Access supported
F 0b 0 SCT Command Transport supported
Word 207: 0000h 0000h Reserved for CE-ATA
Word 209: (O) 0000h Alignment of logical blocks within a larger physical block
0b 15 Shall be cleared to zero
0b 14 Shall be set to one
00000000000000b 13:0 Logical sector offset within the first physical sector where the first logical sector is placed
Word 210: (O) 0000h 0000h Write-Read-Verify Sector Count Mode 3 Only (DWord)
Word 212: (O) 0000h 0000h Write-Read-Verify Sector Count Mode 2 Only (DWord)
Word 214: (O) 0000h NV Cache Capabilities
F 0000b 15:12 NV Cache feature set version
F 0000b 11:8 NV Cache Power Mode feature set version
000b 7:5 Reserved
V 0b 4 1 = NV Cache feature set enabled
00b 3:2 Reserved
V 0b 1 1 = NV Cache Power Mode feature set enabled
F 0b 0 1 = NV Cache Power Mode feature set supported
Word 215: (O) 0000h NV Cache Size in Logical Blocks (DWord)
Word 217: (M) 0001h Nominal media rotation rate
Word 218: 0000h Reserved
Word 219: (O) 0000h NV Cache Options
15:8 Reserved
F 00h 7:0 Device Estimated Time to Spin Up in Seconds
Word 220: (O) 0000h See 7.18.7.84
15:8 Reserved
V 00h 7:0 Write-Read-Verify feature set current mode
Word 221: 0000h Reserved
Word 222: (M) 107fh Transport Major revision number. 0000h or FFFFh = device does not report version
F 0001b 15:12 Transport Type - 0 = Parallel, 1 = Serial, 2-Fh = Reserved
00000111b 11:4 Reserved Reserved
F 1b 3 Reserved SATA Rev 2.5
F 1b 2 Reserved SATA II: Extensions
F 1b 1 ATA/ATAPI-7 SATA 1.0a
F 1b 0 ATA8-APT ATA8-AST
Word 223: (M) 0000h Transport Minor revision number
Word 224: Reserved for CE-ATA
0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
0000h 0000h
Word 234: (O) 0080h Minimum number of 512 byte units per DOWNLOAD MICROCODE command mode 03h
Word 235: (O) 8000h Maximum number of 512 byte units per DOWNLOAD MICROCODE command mode 03h
Word 236: Reserved
0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
0000h 0000h 0000h 0000h 0000h 0000h 0000h 0000h
0000h 0000h 0000h
Word 255: (M) a0a5h Integrity word
a0h 15:8 Checksum
a5h 7:0 Signature
-
New #18
-
-
New #19
OK so far all fine. Cables are SATA3 Bios Set to AHCI. all fine thank you
-
New #20
JDS63 and makisxxx: It seems you've hijacked my thread: "SSD not working" Could you please go somewhere else?
Quote
Related Discussions
