Intel RAID / RST USER INTERFACE?? [GUI] Windows 10? Where?

Page 2 of 2 FirstFirst 12
  1. jds63's Avatar
    Posts : 3,139
    Windows 10 Pro 64 bit Version 20H2
       #11

    I do recall having means to this in Windows 8.1 GUI. Going to HP site, that what system is ? Basically going to look for ones, like Intel INF installastion, Intel SATA Preinstall Drivers (which are same as IRST drivers for system),Lan Drivers and most others like Graphics and sound cards these can be downloaded from there manufacturer's site too.

    Found this here post #12 Cant install Intel RST program



    Update
    Googling this myself does not come across anything pertaining to IRST software and Windows 10, mostly just the IRST drivers last updated. Good luck if you find something else. Only try running newest version you can get in Compatibility mode possibly.
    Last edited by jds63; 14 Oct 2015 at 18:38.
      My Computer

  2. Almighty1's Avatar
    Posts : 1,043
    Windows XP/7/8/8.1/10, Linux, Android, FreeBSD Unix
       #12

    If you're using version 10, it means you're on a older chipset that is not supported in the other versions. My system is 4 years old running on the mobile Sandy Bridge chipset and I can't run anything newer than 12.x as 13.x and 14.x installers would say my chipset is not supported. Basically,

    10.x is the last version supporting ICH9.
    11.x is the last version supporting ICH7R and ICH7M, ICH9M, ICH10D
    12.x is the last version supporting PCH 5 , PCH 6 series, ICH10R (RAID Mode)
    13.x is the last version supporting PCH 7 series

    10.1.0.1088 is from November 2010 and if you looked, it only supports up to Windows 7, not 8.

    https://downloadcenter.intel.com/dow...Desktop-Boards

    10.8.0.1003 was the last 10.x driver which came out in January 2012 so if you chipset is not supported by v11-v14, you're basically SOL:
    https://downloadcenter.intel.com/download/20768/AHCI-Intel-Rapid-Storage-Technology-Driver-for-Intel-Desktop-Boards-

    If you look at this, only 11-14 are really supporting Windows 8 and above:
    https://downloadcenter.intel.com/sea...Storage+driver

    What is the exact version # of the driver Windows 10 installs?

    Intel RAID / RST USER INTERFACE?? [GUI] Windows 10? Where?-2015-10-14_19-37-31.jpg

    Mines installs to C:\Program Files and not C:\Program Files(x86)

    Intel RAID / RST USER INTERFACE?? [GUI] Windows 10? Where?-2015-10-14_19-45-20.jpg


    The Windows Update version doesn't have the GUI but the one where you run the setup.exe program will have the GUI. Previously, I never had the GUI until exactly one month ago because I never installed any Intel drivers other than the chipset INF and figured I updated it as the drivers previously were from 2011.

    Intel RAID / RST USER INTERFACE?? [GUI] Windows 10? Where?-2015-10-14_19-47-41.jpg
    Last edited by Almighty1; 14 Oct 2015 at 22:07.
      My Computer


  3. Posts : 396
    Windows 10 1803
    Thread Starter
       #13

    Q57


    great input AL, for which I thank you.
    here's what I loaded AFTER the upgrade. No UI
    Download Intel RST) RAID Driver

    it is the only one, yet, which is Windows 10 cert. The driver did not behave well unless I'm missing something - like removing old files or whatever. as said, with nothing at all going on with the system, with it unplugged from net, the cpu would cycle up every few seconds

    you are no doubt right about the chipset support. I don't have it up and running at present but that model used the same Q57 chipset as the prior last-generation-ever Core 2 Duo models.

    really, I can't think of a good reason why the old GUI won't load/run if properly installed. I have found on other win 10 installs that programs work pretty good, no matter the generation - there's a way to get compatibility. I just couldn't put my fingers on the install package.

    Almighty1 said:
    If you're using version 10, it means you're on a older chipset that is not supported in the other versions. My system is 4 years old running on the mobile Sandy Bridge chipset and I can't run anything newer than 12.x as 13.x and 14.x installers would say my chipset is not supported. Basically,

    10.x is the last version supporting ICH9.
    11.x is the last version supporting ICH7R and ICH7M, ICH9M, ICH10D
    12.x is the last version supporting PCH 5 , PCH 6 series, ICH10R (RAID Mode)
    13.x is the last version supporting PCH 7 series

    10.1.0.1088 is from November 2010 and if you looked, it only supports up to Windows 7, not 8.

    https://downloadcenter.intel.com/dow...Desktop-Boards

    10.8.0.1003 was the last 10.x driver which came out in January 2012 so if you chipset is not supported by v11-v14, you're basically SOL:
    https://downloadcenter.intel.com/download/20768/AHCI-Intel-Rapid-Storage-Technology-Driver-for-Intel-Desktop-Boards-

    If you look at this, only 11-14 are really supporting Windows 8 and above:
    https://downloadcenter.intel.com/sea...Storage+driver

    What is the exact version # of the driver Windows 10 installs?

    Intel RAID / RST USER INTERFACE?? [GUI] Windows 10? Where?-2015-10-14_19-37-31.jpg

    Mines installs to C:\Program Files and not C:\Program Files(x86)

    Intel RAID / RST USER INTERFACE?? [GUI] Windows 10? Where?-2015-10-14_19-45-20.jpg


    The Windows Update version doesn't have the GUI but the one where you run the setup.exe program will have the GUI. Previously, I never had the GUI until exactly one month ago because I never installed any Intel drivers other than the chipset INF and figured I updated it as the drivers previously were from 2011.

    Intel RAID / RST USER INTERFACE?? [GUI] Windows 10? Where?-2015-10-14_19-47-41.jpg
      My Computer

  4. Almighty1's Avatar
    Posts : 1,043
    Windows XP/7/8/8.1/10, Linux, Android, FreeBSD Unix
       #14

    Looking at your link, which one of those files did you download and use? Did you use SetupRST.exe or the zip files, it seems like from the size of the files, the zip files are drivers only while SetupRST.exe would have the UI in it. Which motherboard do you have exactly since it's amazing you can use a version 14 driver while I cannot use anything past 12.x as the installer will exit with a message that it does not support my system since when I installed, I actually started with 14.x which won't install, then 13.x with the same problem until 12.x works. My system being a ASUS G74SX notebook is 4+ years old running a Core i7 and it only works with drivers up to 12.x so I was surprised you can get 14.x drivers working. Try this one:

    Intel Rapid Storage Technology (RST) Version 14.6.1.1030 WHQL

    Date of package:27/08/15


    Date & Version: 08/18/2015,14.6.1.1030


    For:


    Microsoft Windows 7*


    Microsoft Windows 7 x64 Edition*


    Microsoft Windows 8*#


    Microsoft Windows 8 x64 Edition*


    Microsoft Windows Server 2008 R2 x64*#


    Microsoft Windows Server 2012 x64 Edition*#


    Microsoft Windows Server 2012 R2 x64 Edition*


    Microsoft Windows 8.1*#


    Microsoft Windows 8.1 x64 Edition*


    Microsoft Windows 10*#


    Microsoft Windows 10 x64 Edition*


    For:


    Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller'


    Intel(R) 8 Series Chipset Family SATA AHCI Controller'


    Intel(R) 9 Series Chipset Family SATA AHCI Controller'


    Intel(R) 6th Generation Core Processor Family Platform I/O SATA AHCI Controller'


    Intel(R) 100 Series/C230 Chipset Family SATA AHCI Controller'


    Intel Chipset SATA RAID Controller



    https://www.station-drivers.com/inde...d=1782&lang=fr
      My Computer


  5. Posts : 396
    Windows 10 1803
    Thread Starter
       #15

    I got the right skinny from the win-raid.com forum.
    which I recommend.


    Almighty1 said:
    Looking at your link, which one of those files did you download and use? Did you use SetupRST.exe or the zip files, it seems like from the size of the files, the zip files are drivers only while SetupRST.exe would have the UI in it. Which motherboard do you have exactly since it's amazing you can use a version 14 driver while I cannot use anything past 12.x as the installer will exit with a message that it does not support my system since when I installed, I actually started with 14.x which won't install, then 13.x with the same problem until 12.x works. My system being a ASUS G74SX notebook is 4+ years old running a Core i7 and it only works with drivers up to 12.x so I was surprised you can get 14.x drivers working. Try this one:

    Intel Rapid Storage Technology (RST) Version 14.6.1.1030 WHQL

    Date of package:27/08/15


    Date & Version: 08/18/2015,14.6.1.1030


    For:


    Microsoft Windows 7*


    Microsoft Windows 7 x64 Edition*


    Microsoft Windows 8*#


    Microsoft Windows 8 x64 Edition*


    Microsoft Windows Server 2008 R2 x64*#


    Microsoft Windows Server 2012 x64 Edition*#


    Microsoft Windows Server 2012 R2 x64 Edition*


    Microsoft Windows 8.1*#


    Microsoft Windows 8.1 x64 Edition*


    Microsoft Windows 10*#


    Microsoft Windows 10 x64 Edition*


    For:


    Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller'


    Intel(R) 8 Series Chipset Family SATA AHCI Controller'


    Intel(R) 9 Series Chipset Family SATA AHCI Controller'


    Intel(R) 6th Generation Core Processor Family Platform I/O SATA AHCI Controller'


    Intel(R) 100 Series/C230 Chipset Family SATA AHCI Controller'


    Intel Chipset SATA RAID Controller




    https://www.station-drivers.com/inde...d=1782&lang=fr
      My Computer


 
Page 2 of 2 FirstFirst 12

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 15:14.
Find Us




Windows 10 Forums