Page 1 of 4 123 ... LastLast

  1. Joined : Jul 2015
    Posts : 127
    Windows 10
       26 Aug 2015 #1

    ssd not recognised


    I have 2 ssd Samsung SSD 840 pro series (c and Samsung SSD 850 EVO 1TB (d.

    Both these drives are recognised I presume correctly.

    They are installed on a Toshiba QOSMIO X500 PQX33E-00N006EN laptop.

    Trim is enabled as I run fsutil behavior query DisableDeleteNotify in command prompt with result 0.

    I cannot defrag using trim any of the drives as
    you can see from the below



    I did not have this problem in Windows 7.

    Any help in solving this would be appreciated.

    Thank you.
    Attached Thumbnails Attached Thumbnails 2015_08_26_17_45_401.png  
      My System SpecsSystem Spec


  2. Joined : Jul 2015
    Posts : 266
    Windows 10
       26 Aug 2015 #2

    I might not be reading this right, but but the command window is saying (correctly) that the SSD drive cannot be defragged (actually it should never be defragged). It is performing the trim function as it should. In Windows 10 there is an optimize function which will send a trim instruction to SSD's and defrag traditional hard drives. Both actions are performed under the same heading of "Optimize Drives".
      My System SpecsSystem Spec


  3. Joined : Jul 2015
    Posts : 127
    Windows 10
       26 Aug 2015 #3



    As you can see from the above on drive C: and D: which are the drives I am concerned about current status states Optimisation not available so I do not understand what is going on.

    Any help appreciated.

    Thank you.
    Attached Thumbnails Attached Thumbnails 2015_08_27_03_01_391.png  
      My System SpecsSystem Spec


  4. Joined : Jul 2015
    Posts : 266
    Windows 10
       27 Aug 2015 #4

    I see your problem. That is clearly not right. Can you open Device Manager, click on Disk drives and post the window?
      My System SpecsSystem Spec


  5. Joined : Jul 2015
    Posts : 127
    Windows 10
       27 Aug 2015 #5



    Attached is screen device manager screen print as requested.

    Hope you can solve problem.

    Thank you.
    Attached Thumbnails Attached Thumbnails 2015_08_27_17_39_121.png  
      My System SpecsSystem Spec


  6. Joined : Dec 2013
    England
    Posts : 837
    Windows IP 15007 Windows 14393.693
       27 Aug 2015 #6

    Can you tell us the AHCI driver version. You could check in Device manager and expand IDE/ATAPI.
    Click image for larger version. 

Name:	Capture 100.JPG 
Views:	79 
Size:	44.2 KB 
ID:	34217
      My System SpecsSystem Spec


  7. Joined : Jul 2015
    Posts : 127
    Windows 10
       27 Aug 2015 #7



    Attached is screen print of AHCI driver version.
    Attached Thumbnails Attached Thumbnails 2015_08_27_21_05_031.png  
      My System SpecsSystem Spec


  8. Joined : Jul 2015
    Posts : 266
    Windows 10
       27 Aug 2015 #8

    What type of drive is Throttle? Pardon my ignorance
      My System SpecsSystem Spec


  9. Joined : Jun 2015
    N.Y.
    Posts : 3,005
    Windows 10 Pro 64 bit
       27 Aug 2015 #9

    Also check Disk Management.
      My System SpecsSystem Spec


  10. Joined : Jul 2015
    Posts : 266
    Windows 10
       27 Aug 2015 #10

    You have a fairly interesting mix of SSD's. It's a long shot, but could you try physically disconnecting all the drives with the exception of your boot drive and see if Windows 10 acts differently.
      My System SpecsSystem Spec


 
Page 1 of 4 123 ... LastLast


Similar Threads
Thread Forum
Solved Windows 10 - my dvd/cd drive is not recognised, at all
Hi, It really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing...
Drivers and Hardware
Only one of two optical drives recognised by W10
HI, still checking out changes but most obvious is loss one of my drives. can anybody advise how to locate?
Drivers and Hardware
Solved DVD ROM not recognised after Win 10 upgrade
Sorry, realised it was in the wrong section.
General Support
Loaded Win but DVD drive is not recognised
I have downloaded Win10 onto my laptop. The DVD is: UltraNote Series: 8x SATA DVD±R/RW/Dual Layer (+ 24x CD-RW) I thought that everything was fine after I had re loaded Norton which had disappeared. All other icons and programmes were intact. I...
Installation and Setup
GTX 550Ti not recognised
GTX550Ti shows up in Device Manager as Unknown Device. Have tried to install latest drivers but Nvidia cannot find Graphics Card. Same problem when driver update tried in device manager.
Graphic Cards
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:09.
Find Us
Twitter Facebook Google+



Windows 10 Forums