Page 3 of 4 FirstFirst 1234 LastLast
  1.    08 Sep 2015 #21
    Join Date : Jul 2015
    Posts : 131
    Windows 10
    Thread Starter



    From the above you can see that performance optimization is not supported on Windows 8 or higher in latest version of Samsung Magician so cannot use to trim seams I will have to go back to version 4.5 first installing 4.4 so that rapid mode works and then over installing 4.5 the version that everything works (seems to work).

    Any help in solving problem would appreciated.

    Please note lopedoggie suggestion of Auslogics Disk Defrag free version seems good as it actuly trims or says it does trim ssd's.

    My main concern is solving problem with Windows 10 problem of not letting me trim ssd's then problem with Samasung Magician.

    Again all help appreciated.

    Thank you.
    Attached Thumbnails Attached Thumbnails error2.gif  
      My ComputerSystem Spec
  2.    09 Sep 2015 #22
    Join Date : Jul 2015
    Posts : 267
    Windows 10

    There are two different solutions. The simplest is to install 4.4, start rapid and then uninstall 4.4 and install 4.7. At this point rapid would stay on. The second method is a hack process that involves a little more complications but will allow you to modify processes within 4.7 to allow rapid. It has been posted on this forum couple of times in the last month. The former method might be using a version of rapid that might (I stress might) use an older algorithm that utilizes less memory.
    While a fan of rapid and its placebo effect, I will wait for that till Samsung comes out with an official version. The memory management system in Windows 10 is considerably different and I am presuming that there is a good reason for its disconnection in the latest 4.7 version.
      My ComputerSystem Spec
  3.    09 Sep 2015 #23
    Join Date : Jul 2015
    Posts : 131
    Windows 10
    Thread Starter

    Just to let everybody know I have just got confirmation from Samsung that a new Windows 10 compatible version of Samsung Magician is on its way but they cannot tell me when it will be released.
      My ComputerSystem Spec
  4.    09 Sep 2015 #24
    Join Date : Jul 2015
    Posts : 267
    Windows 10

    Good to know. Thanks
      My ComputerSystem Spec
  5.    09 Sep 2015 #25
    Join Date : Jul 2015
    Posts : 410
    Windows 10 Pro 64bit v1709 build 16299.15

    Magician is not ready for Win 10 at this time. How do I know? I used it on Win 8.1 and it did the job as advertised. On Win 10 it will not do much of anything.
      My ComputerSystem Spec
  6.    09 Sep 2015 #26
    Join Date : Jul 2015
    Posts : 131
    Windows 10
    Thread Starter

    lopedogie if you read what I have written above I say I have just got confirmation from Samsung that a new Windows 10 compatible version of Samsung Magician is on its way but they cannot tell me when it will be released not that it currently works in Windows 10.
      My ComputerSystem Spec
  7.    10 Sep 2015 #27
    Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3

    Quote Originally Posted by jaburmester View Post
    Attached is screen print of AHCI driver version.
    That's a fairly old driver.

    Try running the Intel® Driver Update Utility to see if it finds more recent driver(s).

    Also .....
    Please follow this tutorial to provide the current operating environment of your machine.
    Speccy - Publish Snapshot of your System Specs

    Thanks
      My ComputerSystem Spec
  8.    10 Sep 2015 #28
    Join Date : Jul 2015
    Posts : 131
    Windows 10
    Thread Starter

    Slartybart if you go to http://speccy.piriform.com/results/H...trjYpLJwBiKtce you can see my systems specs.

    I tried running Intel Driver Update Utility and got message shown below.


    All help appreciated.

    Thank you.
    Attached Thumbnails Attached Thumbnails Intel.gif  
      My ComputerSystem Spec
  9.    11 Sep 2015 #29
    Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3

    Thanks,

    I was afraid that the Intel utility would not find anything to update.

    I'll look at the Speccy.

    BIOS is current - I still need to look at the Intel Chipset even though the Intel utility said nothing needed.

    I strongly recommend that you uninstall
    eBoostr: 29GB ExpressCard SSD ATA Device (SSD) and
    eBooster 2: 30GB THROTTLE (SSD)

    You won't gain much from that sort of technology on Win10 with a SSD boot drive- it might even slow things down.

    Most boost and system 'optimizers' aren't worth giving a 2nd look after Win Vista. They had some leg in XP and previous versions, but more modern Windows have far superior utilities. The old tweaks, boosts, optimizers are .... well, they're just old. After Win8, most of them really just clog the OS and some might be harmful causing BSODs.
    Last edited by Slartybart; 11 Sep 2015 at 04:04.
      My ComputerSystem Spec
  10.    12 Sep 2015 #30
    Join Date : Jul 2015
    Posts : 131
    Windows 10
    Thread Starter

    Have used DriverMax http://www.drivermax.com and all is now OK.

    Thank you all for help given.
      My ComputerSystem Spec

 
Page 3 of 4 FirstFirst 1234 LastLast


Similar Threads
Thread Forum
Solved Windows 10 - my dvd/cd drive is not recognised, at all
Hi, It really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing...
Drivers and Hardware
Only one of two optical drives recognised by W10
HI, still checking out changes but most obvious is loss one of my drives. can anybody advise how to locate?
Drivers and Hardware
Solved DVD ROM not recognised after Win 10 upgrade
Sorry, realised it was in the wrong section.
General Support
Loaded Win but DVD drive is not recognised
I have downloaded Win10 onto my laptop. The DVD is: UltraNote Series: 8x SATA DVD±R/RW/Dual Layer (+ 24x CD-RW) I thought that everything was fine after I had re loaded Norton which had disappeared. All other icons and programmes were intact. I...
Installation and Upgrade
GTX 550Ti not recognised
GTX550Ti shows up in Device Manager as Unknown Device. Have tried to install latest drivers but Nvidia cannot find Graphics Card. Same problem when driver update tried in device manager.
Graphic Cards
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 21:24.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums