TPM Module for Gigabyte Motherboard

Page 1 of 2 12 LastLast

  1. Posts : 7,895
    Windows 11 Pro 64 bit
       #1

    TPM Module for Gigabyte Motherboard


    My 2012 Gigabyte GA-Z77X-UD5H motherboard has a 20 pin TPM slot as shown below. Gigabyte advise the slot is for a v1.0 TPM module.
    TPM Module for Gigabyte Motherboard-image.png
    It's unclear whether I need a bespoke Gigabyte TPM module or whether any 20 pin v1.0 TPM will work. I don't plan to use Bitlocker. In that case, what extra system security does the TPM provide? Will there be a problem accessing my data if there s ever a problem with the TPM module?
      My Computers


  2. Posts : 7,895
    Windows 11 Pro 64 bit
    Thread Starter
       #2

    Update - I bought this TPM on EBay to try since the Gigabyte product is no longer sold Foxconn PC TPM KRYPTON Trusted platform Module rev 1.0 TPM-KRYPTON 20 PIN | eBay
      My Computers


  3. Posts : 23,164
    Win 10 Home ♦♦♦19045.4291 (x64) [22H2]
       #3

    Steve C said:
    Update - I bought this TPM on EBay to try since the Gigabyte product is no longer sold Foxconn PC TPM KRYPTON Trusted platform Module rev 1.0 TPM-KRYPTON 20 PIN | eBay



    Are you doing this for Windows 11?


    If so...

    It looks like I'm stuck with Windows 10. | Windows 11 Forum
      My Computer


  4. Posts : 7,895
    Windows 11 Pro 64 bit
    Thread Starter
       #4

    Ghot said:
    Are you doing this for Windows 11?


    If so...

    It looks like I'm stuck with Windows 10. | Windows 11 Forum
    Partly for W11, partly since I like fiddling with PCs and partly in the vain hope of increased security.
      My Computers


  5. Posts : 23,164
    Win 10 Home ♦♦♦19045.4291 (x64) [22H2]
       #5

    Steve C said:
    Partly for W11, partly since I like fiddling with PCs and partly in the vain hope of increased security.


    I understand completely. W11 wants TPM 2.0, if you can find one of them.
      My Computer


  6. Posts : 7,895
    Windows 11 Pro 64 bit
    Thread Starter
       #6

    Ghot said:
    I understand completely. W11 wants TPM 2.0, if you can find one of them.
    My 2012 board is TPM 1.0. That means a work around or PC upgrade I was considering anyway.
      My Computers


  7. Posts : 23,164
    Win 10 Home ♦♦♦19045.4291 (x64) [22H2]
       #7

    Steve C said:
    My 2012 board is TPM 1.0. That means a work around or PC upgrade I was considering anyway.


    Just reading all the posts about W11 and TPM 2.0... I doubt the TPM 2.0 requirement will make it to the final build of W11.
    There seem to be far too many systems without TPM 2.0 capability, even new systems.

    If MS follows their usual... "we MUST have W11 on EVERY machine...", they will probably have to relax that TPM 2.0 requirement.
      My Computer


  8. Posts : 1
    Win 10 Pro 64-bit
       #8

    Did your board recognisei that TPM?


    I have the same mboard (2nd PC), and bought the similar Foxconn TPM, v1.2. Fits after cutting off the key, but not recognised in bios. Perhaps the 1.0/1.2 difference is the reason?
      My Computer


  9. Posts : 4,559
    several
       #9

    i have a ga z77 and a ga b75. It doesnt fit them.
      My Computer


  10. Posts : 4,453
    Win 11 Pro 22000.708
       #10

    Steve C said:
    Partly for W11, partly since I like fiddling with PCs and partly in the vain hope of increased security.
    As that motherboard won't officially support Windows 11, at the very least because it can't take a Gen8 CPU (or Gen 7, if MS relaxes the requirement that much), maybe you should just play with 11 without a TPM. (MS states that 11 won't be installable on a system that fails to meet all hardware security requirements.)

    I can't advise you on how to do that from personal experience. but the Windows 11 forum can probably supply all that you need.

    I was able to clean install 22000.51 using an ISO from uupdump.net on a system that meets all of the announced requirements but that didn't have Secure Boot turned on. I don't know if missing any of the other requirements would cause the installation to fail.

    I believe that PCs sold with Windows 10 had to meet all of the Windows 11 hardware security requirements, except for the CPU generation. Your Z77 motherboard pre-dates that.

    I wonder whether MS will relax the requirements before 11 becomes generally available? Current security isn't good enough?
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:54.
Find Us




Windows 10 Forums