Win10 doesn't recognize SD-card removal  

Page 2 of 3 FirstFirst 123 LastLast

  1. hsehestedt
    Posts : 3,805
    Windows 11 Pro, 22H2
       New #11

    One more favor:

    Go back into device manager again, open properties, then the driver tab. What driver version is shown and who is listed as the "Driver provider"?
      My Computers
    Quote Quote

  2. Gorlash
    Posts : 77
    Microsoft Windows 10 Pro 64-bit 19042 Multiprocessor Free
    Thread Starter
       New #12

    hsehestedt said:
    One more favor:

    Go back into device manager again, open properties, then the driver tab. What driver version is shown and who is listed as the "Driver provider"?
    Driver Provider: Genesys Logic
    Driver Date: 04/17/20
    Driver Version 4.5.4.4
      My Computer
    Quote Quote

  4. hsehestedt
    Posts : 3,805
    Windows 11 Pro, 22H2
       New #13

    Yep, that's the latest driver available on Windows Update Catalog.

    Well, heck, I'm a bit stumped.

    Question: Do you have another computer on which you could try that same card reader? If so, does it behave the same on another PC or only on this one?
      My Computers
    Quote Quote

  5. Gorlash
    Posts : 77
    Microsoft Windows 10 Pro 64-bit 19042 Multiprocessor Free
    Thread Starter
       New #14

    Just to add another data point, I tried this same operation with a different SD-card reader entirely, a Saicoo USB3 multi-card reader, and it has exactly the same issue; inserted cards are recognized with no problem, but when the card is removed from the reader, Windows doesn't ever seem to be aware that the removal has occurred...

    This suggests to me, that the issue is with Windows settings, rather than device-driver configuration; most of these usb-adapter interfaces are years old, and use generic Windows drivers...
      My Computer
    Quote Quote

  7. hsehestedt
    Posts : 3,805
    Windows 11 Pro, 22H2
       New #15

    LOL, that's exactly where I was headed. If it worked on another system, more than likely it's something else on this machine affecting it.

    One interesting aspect is the behavior when you run diskpart. I'm guessing it is rescanning for devices and that is why it drops off the list at that time. It sounds like something is interfering with the disk removal detection.

    I'll do some more research, but I'm not sure how much more I will find. Will let you know!

    My apologies for not have found a resolution yet.
      My Computers
    Quote Quote

  8. Gorlash
    Posts : 77
    Microsoft Windows 10 Pro 64-bit 19042 Multiprocessor Free
    Thread Starter
       New #16

    hsehestedt said:
    Yep, that's the latest driver available on Windows Update Catalog.

    Well, heck, I'm a bit stumped.

    Question: Do you have another computer on which you could try that same card reader? If so, does it behave the same on another PC or only on this one?
    ooooh... interesting idea!!
    I have a Microsoft Surface Laptop...

    Different version of windows, it is Version 6.3.19041...
    But this operation works *fine* on it, with the Saicoo card; inserting a card brings up Explorer with the card listed...
    Removing the card from the reader, closes Explorer...

    So what changed between 6.3.19041 and 6.3.19042 ???
      My Computer
    Quote Quote

  9. hsehestedt
    Posts : 3,805
    Windows 11 Pro, 22H2
       New #17

    The 19041 is not really the important part. 19041 indicates Windows 10 version 2004 whereas 19042 is Windows 10 version 20H2. What would be more interesting is the number that comes after that. For example, 19042.870 is Windows 10 20H2, with the March 18, 2021 out-of-band updates applied.

    Note that 19041 and 19042 share the exact same updates, that's why I say that they are not important. It's the patch level (the number after that) that is of interest to us.

    See here for more info:

    https://support.microsoft.com/en-us/...b-d79d9d0cdbda
      My Computers
    Quote Quote

  10. Gorlash
    Posts : 77
    Microsoft Windows 10 Pro 64-bit 19042 Multiprocessor Free
    Thread Starter
       New #18

    hsehestedt said:
    The 19041 is not really the important part. 19041 indicates Windows 10 version 2004 whereas 19042 is Windows 10 version 20H2. What would be more interesting is the number that comes after that. For example, 19042.870 is Windows 10 20H2, with the March 18, 2021 out-of-band updates applied.
    Well, that presents an ambiguity for me...

    My desktop machine is :
    Windows 10 Pro
    Version 20H2
    OS Build 19042.867

    But my laptop machine doesn't show *any* of this data at all!!
    The entire Control Panel: Home page is entirely different, has the older system-info layout.
    What I get on 'This PC: Properties' is "View basic information about your computer",
    rather than "About", with the new menu down the side, and the Windows Specifications at the bottom...
    I don't know how to find this detailed info on the older Windows System layout...
      My Computer
    Quote Quote

  11. hsehestedt
    Posts : 3,805
    Windows 11 Pro, 22H2
       New #19

    If you open a command prompt, what does the first line say?
      My Computers
    Quote Quote

  12. Gorlash
    Posts : 77
    Microsoft Windows 10 Pro 64-bit 19042 Multiprocessor Free
    Thread Starter
       New #20

    hsehestedt said:
    If you open a command prompt, what does the first line say?
    HAH!!! Very excellent, thanks!!!

    Version 10.0.19041.804

    I always use tcc for console, not cmd.exe, so I've never looked at that before...
      My Computer
    Quote Quote

 

  Related Discussions
I've got a laptop with two SSDs - the main SATA SSD and a small mSATA SSD. I installed Win 10 to the main SSD (Win 10 installer could see both disks). Once Win 10 is installed, it no longer sees the mSATA SSD. In Disk Mgmt, I only see Disk 0 (the...
Win10 doesn't always recognize my password
in User Accounts and Family Safety

This happened back in July, then again last month. At boot up win10 does not recognize my sign in password for my local user account. Since I know my password I typed it in again, no good. I spent the rest of the day retrying my password. Must...
Windows Doesn't Recognize Ethernet
in Network and Sharing

I ran Windows 8.1 on my desktop machine a few months ago, and later upgraded to Windows 10. Everything worked great at that time, but since have replaced Windows with Linux. Now I'm trying to install Windows again, with the same 8.1 disk that I used...
I got a new Samsung SM951 M.2 PCI drive. I have a X99 motherboard but it didn't have the M.2 slot so I purchased an adapter to attach the drive and installed it into an open PCI slot. When I first installed it and boot up under the current...
When i go to disk management all i see is NTFS file system , my SSD no longer shows , is this normal ?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 19:23.
Find Us




Windows 10 Forums