Page 3 of 3 FirstFirst 123
  1.    23 Aug 2015 #21
    Join Date : Aug 2015
    Posts : 2
    Windows 10
    Thread Starter

    Big thanks to erpster4 for giving the driver package. I don't know how you people find stuff like this but I'm glad you do.

    Anyways, the driver worked for a little while, the first two days was fine, and there was an automatic switch between headphones/speakers. However, today I booted up the computer to find that the computer messed up somewhere and muted the headphones. Or rather, both headphones and speakers play sounds fine, but the sound menu labels both as "speakers". It's a bit hard to explain, but I've somehow fixed it by disabling the headphones for now. Weird.

    Anyways, thanks everyone that helped out . I'll leave this open for problems some other people posted.
      My ComputerSystem Spec
  2.    08 Sep 2015 #22
    Join Date : Sep 2015
    Posts : 1
    Windows 10

    Hello,

    I just want to share my own experience. As most of you, I have same problems of VIA driver updated by Windows 10 causing microphone and speaker sound problems. The original drivers from VIA or Asus are OK, but they are quickly replaced somehow by Windows 10 (maybe at a reboot). So once I was on a good configuration with VIA driver (in Device manager it appears as High definition audio (good) instead of Via audio (bad), I use the following tool to prevent Windows 10 to update the existing good driver.

    How to Uninstall and Block Updates and Drivers on Windows 10

    Then the VIA driver to be updated is listed by the tool. So you just check it to mask it to be updated from Windows 10. This seems to work well!

    Of course you must use the tool when you are with the working driver but candidate to be updated by Windows. Otherwise, if you are with the latest VIA driver updated by Windows 10, you will not see the VIA driver in the MS tool above, and hence you will not be able to block/mask anything.

    Hope this helps.
      My ComputerSystem Spec
  3.    09 Jan 2016 #23
    Join Date : Jan 2016
    Posts : 1
    Windows 10 Home 64-bit

    Sorry for the necropost. I will start a new thread if required but this is exactly my problem though none of the solutions above seem to work. The VIA driver download which I actually tried before coming here gives me the option to switch automatically. That turns the speakers off but the headsets do not work. Other fixes including this one I found on reddit and the one in the previous post there by hapx do not seem to work. They either make it so the system tray says they are switched when they are not or the headphones or speakers don't work.
    My next step is to download a switcher that runs in the systray that allows a switch with a single click but I would really rather it just worked correctly. Any help?
    BTW .. I did verify that my VIA chipset (1818) is included in the VIA download)
      My ComputerSystem Spec
  4.    24 Nov 2016 #24
    Join Date : Nov 2016
    Posts : 1
    Windows 10 Pro 64-bit

    Hello everyone. It's not a first my (or my friends) problem with VIA HD Audio on Windows 10 (XP, 7, 8 too).
    I've found solution for my job's Desktop PC.

    Sound: VIA VT1708S
    OS: Windows 10 Pro x64
    problem: front panel does not work (AC97 type I think)
    step 1: download official driver and install
    step 2: run
    v11_1100f_Win10RS1_logo_11012016\VIAHDAud\Present\VDeck64\VDeck.exe, goto settings and disable Auto recogniotion of plugged device option
      My ComputerSystem Spec
  5.    01 Jan 2017 #25
    Join Date : Sep 2016
    Posts : 17
    Rotherham

    Well my son's PC which runs a M4A88T-M AM3+ mobo. Worked great since day of purchase back in 6 or 7 years now. Anyways, recently updated to windows 10 & he hasn't used his headset for gaming until recently to descover the front panel does nothing. Static connecting the headset but that's about it. Doesn't even show up on recording devices. Still omits sound from the rear 2.0 speakers. Tried connecting the headphones to one of the other 5.1 ports but nothing at all.

    Problem is, VIA are not as popular on newer motherboards. Realtek has kinda taken their thunder & for whatever reason. I cannot find VIA VDeck software anywhere to install for windows 10 x64. All I get directed to is the latest VIA audio drivers that doesn't do squat.

    I expected problems with software & support eventually for his motherboard. But the fact that there's nothing that will allow you to configure the 5.1 ports or even to omit sound from all speakers & not individually. But even them, not even the Mic works. I know headset works as tested on laptop.

    So, if your buying a Motherboard that doesn't have windows 10 specific drivers on the manufacturers site. I would avoid!
      My ComputerSystem Spec
  6.    17 Jan 2017 #26
    Join Date : Nov 2016
    Posts : 3
    Windows 10

    Do not believe anything you read, even if it says that the headphones you want to buy are noise cancelling. The majority of headphones will separate noise, but do not confuse that together with sound isolation. Whichever you end up picking, you should know they are not ideal. If you need to deal with low frequency sounds according to this site Headphonesencyclopedia.com then almost all noise cancelling headphones will certainly deliver the results.
      My ComputerSystem Spec

 
Page 3 of 3 FirstFirst 123


Similar Threads
Thread Forum
internal speakers and headphones not working
Hello everyone I upgraded to windows 10 yesterday, and since i did my internal speakers and my headphones are not working anymore. I have a microphone called blue yeti wich can be used as an output. It's the only output that works for me. If i go...
Drivers and Hardware
Labtop speakers and headphones not working(microphone output does)
Hello everyone I upgraded to windows 10 yesterday and now i don't have any sound left. My internal labtop speakers don't get recognized and so are my headphones. i have a microphone(blue yeti) wich chan be used as a output, and it is the only one...
Drivers and Hardware
Having to manually switch from speakers to headphones in settings!
Since the upgrade I have found an annoying problem ( probably driver related ). When I plug anything in the cases front Audio Jack, it does not switch automatically. I have to keep manually changing where audio comes out through using "play back...
Drivers and Hardware
Audio sound not working on speakers/or headphones. No sound
Yesterday my audio worked fine on both my speakers on my laptop (Dell Inspiron/N5110) and headphones. Then all of a sudden they stopped working. I have made sure that all the volumes are not muted. I did a troubleshoot on playing audio and it said...
Software and Apps
Solved Sound coming from both speakers + headphones
Hello, I'm having an issue with my sound, when I have my headphones plugged in both my speakers and the headphones generate sound but I only want the headphones to generate sound. It is simple plug and play headphones. Would anyone know...
Drivers and Hardware
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:12.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums