Several Hard Drive's (Including Brand New) Getting Mixed Errors

Page 2 of 6 FirstFirst 1234 ... LastLast
  1. Clintlgm's Avatar
    Posts : 1,037
    Win 10 pro Upgraded from 8.1
       #11

    I think I would work with the Drives manufacture on this issue, use there tool to evaluate the condition of the drives.
    As per your picture The Disk Mark shows an issue at approximately 38% notice your Read speed dropped to almost Zero in that section of that disk. Does it repeat on concurrent runs of the test?
      My Computers


  2. Posts : 70
    Windows 10 Pro 1809
    Thread Starter
       #12

    Ok, so I wasn't sure if I should've used the possible faulty Sabrent or the single docking station. I didn't really want to put it back in the Sabrent so the error scan is from the single dock, but it wouldn't list anything under health so I thought maybe that dock was too old. So I put in the Sabrent and the health still wouldn't show. The benchmark is through the Sabrent since I already had it in there.

    I'll do either the Sea or Crystal overnite tonight.

    - - - Updated - - -

    Clintlgm said:
    I think I would work with the Drives manufacture on this issue, use there tool to evaluate the condition of the drives.
    As per your picture The Disk Mark shows an issue at approximately 38% notice your Read speed dropped to almost Zero in that section of that disk. Does it repeat on concurrent runs of the test?
    I do see the drop, but I really have no idea what the benchmark says, or is not supposed to say. I'm at work so I can't run another benchmark until I get home.

    - - - Updated - - -

    Here is another benchmark from HD Tune with no dropout this time.

    And Sea Tools. Not really sure about this one, my log does not look like the log on the Seagate page.

    Several Hard Drive's (Including Brand New) Getting Mixed Errors-hdtune_benchmark_sabrent_.png

    Several Hard Drive's (Including Brand New) Getting Mixed Errors-annotation-2020-05-23-073602.jpg
      My Computer


  3. Posts : 32,448
    windows 10 professional version 1607 build 14393.969 64 bit
       #13

    When the benchmark is running you cannot block windows from doing things unrelated to the test.
    These other things can create troughs in the chart.
    If you are concerned about a trough then repeat the testing while in safe mode to reduce windows activity.



    This is from HD Tune FAQ

    HD Tune website

    2. How can I verify the performance of my hard disk?
    Run the benchmark functions and compare the results with the results from the database.
    The graph should show that the hard disk starts at its maximum speed and slows down towards the end of the test.
    A few downward spikes in the graph are not a problem. It means that another application or Windows was accessing the hard disk during the test.
      My Computer


  4. Posts : 70
    Windows 10 Pro 1809
    Thread Starter
       #14

    zbook said:
    When the benchmark is running you cannot block windows from doing things unrelated to the test.
    These other things can create troughs in the chart.
    If you are concerned about a trough then repeat the testing while in safe mode to reduce windows activity.

    This is from HD Tune FAQ

    HD Tune website

    2. How can I verify the performance of my hard disk?
    Run the benchmark functions and compare the results with the results from the database.
    The graph should show that the hard disk starts at its maximum speed and slows down towards the end of the test.
    A few downward spikes in the graph are not a problem. It means that another application or Windows was accessing the hard disk during the test.
    I'm sorry, but I really don't understand any of that. All I did was hit start on the benchmark test. I have no idea if I blocked windows from doing unrelated things or not, and I don't even know what a trough is?

    I don't get it, am I not doing any of these things right?
      My Computer


  5. Posts : 32,448
    windows 10 professional version 1607 build 14393.969 64 bit
       #15

    These are additional tests:

    Run HD Sentinel: (free or trial edition)
    Hard Disk Sentinel - HDD health and temperature monitoring
    Hard Disk Sentinel - HDD health and temperature monitoring
    Post images of each of these tabs into the thread:
    Overview tab
    Temperature
    SMART
    Disk performance
      My Computer


  6. Posts : 70
    Windows 10 Pro 1809
    Thread Starter
       #16

    Several Hard Drive's (Including Brand New) Getting Mixed Errors-annotation-2020-05-23-101256.jpgSeveral Hard Drive's (Including Brand New) Getting Mixed Errors-annotation-2020-05-23-101349.jpgSeveral Hard Drive's (Including Brand New) Getting Mixed Errors-annotation-2020-05-23-101414.jpgSeveral Hard Drive's (Including Brand New) Getting Mixed Errors-annotation-2020-05-23-101437.jpg

    Is my screenshot of Sea Tools OK? Like I said, it didn't show all the info that was displayed on their homepage.
      My Computer


  7. Clintlgm's Avatar
    Posts : 1,037
    Win 10 pro Upgraded from 8.1
       #17

    This shows you actual hard drives are not having issues that the tool can find. Are these disk internal or external that your having issues with. If External I would look at the case and connections a bad cable can cause similar issues as well as a failing chipset in the external case.
      My Computers


  8. Posts : 32,448
    windows 10 professional version 1607 build 14393.969 64 bit
       #18

    On the left pane please click each drive to display results for each tab.
      My Computer


  9. Posts : 70
    Windows 10 Pro 1809
    Thread Starter
       #19

    Clintlgm said:
    This shows you actual hard drives are not having issues that the tool can find. Are these disk internal or external that your having issues with. If External I would look at the case and connections a bad cable can cause similar issues as well as a failing chipset in the external case.
    This is everything:

    Robot Check

    Robot Check

    Robot Check

    The purple was brand new and I'm 99.9% positive that I had formatted it even though I was given the error that it wasn't.

    Sorry, I don't know what the robot check thing is, hopefully you can use the links.

    - - - Updated - - -

    zbook said:
    On the left pane please click each drive to display results for each tab.
    Do you mean you want to see the info on my C drive from Sentinel?

    Sorry, I don't know why I can never seem to get these replys in it's own reply box.
      My Computer


  10. Posts : 32,448
    windows 10 professional version 1607 build 14393.969 64 bit
       #20

    When there are multiple drives displayed in the left pane you can click on each drive to see the results for each tab > post images into the thread
      My Computer


 

Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:32.
Find Us




Windows 10 Forums