"Disk has been surprised removed"

Page 1 of 2 12 LastLast

  1. Posts : 8
    Windows 10
       #1

    "Disk has been surprised removed"


    Hi, I am randomly getting these warnings in event viewer. I am not sure why this is happening but this has been happening for a while now and it seems to happen every few hours.
    I only have 3 internal drives (2 HDDs & 1 SSD) and 5 partitions total (screenshot of disk manager) but the warnings often get up to disk 12 (see screenshot below) so it doesn't even make sense. I also don't have any external drives or flash drives connected to my PC.
    So... should I be worried or just ignore it?
    Here are some screenshots of the event viewer logs:
    "Disk has been surprised removed"-mmc_2eaipk261l.png
    "Disk has been surprised removed"-mmc_xdht5xxcrh.png
    "Disk has been surprised removed"-mmc_2vv99a3e34.png
    "Disk has been surprised removed"-mmc_6cfjmlfooo.png
      My Computer

  2.   My Computer


  3. Posts : 8
    Windows 10
    Thread Starter
       #3

    Thanks for the reply :)
    I do have VM Ware installed on my PC with 2 installed VMs but I haven't used it for a few months so I doubt it's this because the user in the link states that it happened when he was actively using the VM and took a snapshot of it.
      My Computer

  4. Caledon Ken's Avatar
    Posts : 24,262
    Windows 10 Pro x64 Version 2004
       #4

    Hi ItayT. Welcome to the TenForums @ItayT

    If you don't think it is VM related

    I would power down and then reseat your SATA cables at each end.

    Please install Crystal Disk Info Standard edition

    CrystalDiskInfo – Crystal Dew World

    Once installed click on "Function" tab > Advance Feature > Raw Values > 10[Dec]

    This presents error values in decimal amounts.

    Examine each disk, any yellow / red indicators.
      My Computer


  5. Posts : 8
    Windows 10
    Thread Starter
       #5

    Caledon Ken said:
    Hi ItayT. Welcome to the TenForums @ItayT

    If you don't think it is VM related

    I would power down and then reseat your SATA cables at each end.

    Please install Crystal Disk Info Standard edition

    CrystalDiskInfo Crystal Dew World

    Once installed click on "Function" tab > Advance Feature > Raw Values > 10[Dec]

    This presents error values in decimal amounts.

    Examine each disk, any yellow / red indicators.
    Thanks :)
    I don't really understand most values here but I think it looks good.
    So, false alarm or did I miss anything?
    "Disk has been surprised removed"-diskinfo64_48aqexkhbh.png"Disk has been surprised removed"-diskinfo64_pkemdwe9x7.png"Disk has been surprised removed"-diskinfo64_klpxwwhwgu.png
      My Computer


  6. Posts : 38,433
    windows 10 professional version 1607 build 14393.969 64 bit
       #6

    Run HD Tune (free version) (all drives)
    HD Tune website
    Post images into the thread for results on these tabs:
    a) Health
    b) Benchmark
    c) Full error scan


    Run Sea Tools for Windows
    long generic test
    Post an image of the test result into the thread
    SeaTools for Windows |
    Seagate

    How to use SeaTools for Windows | Seagate Support US



    Update the specs in the "My Computer" section:

    System Specs - Fill in at Ten Forums
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forums

    Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, USB wireless network card, etc.)
      My Computer


  7. Posts : 8
    Windows 10
    Thread Starter
       #7

    zbook said:
    Run HD Tune (free version) (all drives)
    HD Tune website
    Post images into the thread for results on these tabs:
    a) Health
    b) Benchmark
    c) Full error scan


    Run Sea Tools for Windows
    long generic test
    Post an image of the test result into the thread
    SeaTools for Windows |
    Seagate

    How to use SeaTools for Windows | Seagate Support US



    Update the specs in the "My Computer" section:

    System Specs - Fill in at Ten Forums
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forums

    Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, USB wireless network card, etc.)
    Thank you! I'll do it ASAP, the scan is probably going to take a while.
    In the meantime... I think it actually may be connected to the VM? HD Tune seems to detect the VM drives for some reason
    "Disk has been surprised removed"-mas1k2xr6j.png
    What do you think? Was that the VM after all?
    EDIT: Wait, it doesn't seem to be VM drives.. I misread the last part as VHD. This reddit thread says it's related to update 1903
      My Computer

  8. Caledon Ken's Avatar
    Posts : 24,262
    Windows 10 Pro x64 Version 2004
       #8

    Did you set Crystal Disk to show decimal values?


    If so those are the weirdest stats I've ever seen. Look at C: Massive read error rate.

    Is C: relatively new?
      My Computer


  9. Posts : 8
    Windows 10
    Thread Starter
       #9

    Caledon Ken said:
    Did you set Crystal Disk to show decimal values?


    If so those are the weirdest stats I've ever seen. Look at C: Massive read error rate.

    Is C: relatively new?
    Yup, I did set it to show decimal values.
    It is very weird, I don't know why it's that big, but why is it still blue and doesn't warn me about it?
    It's not new. It's the SSD I had since 2015.
      My Computer

  10. Caledon Ken's Avatar
    Posts : 24,262
    Windows 10 Pro x64 Version 2004
       #10

    Well I have never seen Crystal disk so out.

    Says on for 146 hours.


    Did you recently update firm wear on did you run any routines to reset SMART data?


    I assume you are fully backed up? ( System / data )

    Think I would run chkdsk /scan

    zbook has suggested HDTune. Could to get second opinion. Crystal disk seems in error.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 15:31.
Find Us




Windows 10 Forums