Latest Samsung NVMe Driver Released

CountMike said:

Crystal disk mark is not really geared toward SSDs. Try AS SSD Benchmark 2.0.7316 Download - TechSpot

Here's mine with AS SSD

Here's mine. C: 970 Pro-1. H: 970 Pro-2, g: 970 Evo Plus. All 1TB. These are even scarier than the original tests I did. My 4K results are appalling. I would have hoped overall these drives would be closer to the advertised speeds. Yes, I know the speeds they advertise are max and rare but I'm at about 60% sequential?

I fear it might be connected to M2_1, though unless there's a reliable way of finding out without pulling the PC apart, I'll do that tomorrow and find out for sure.

My Creator X299 is BIOS v1.1. There is a later version. I'll try upgrading that too.

The MB schematic doesn't tell me what slot the drive is in. There are two 970 Pro's... Which one is in M2_1? Also can't tell from the BIOS. The drives have the same name. I can't see into the case, and I have to move another case out of the way to get into this case... It's too late to do it tonight I'll get on to it tomorrow.

- - - Updated - - -

Yes, the boot drive is definitely connected to M2_1. And I know why I did that. Because that port is behind the video card every time I want to remove the drive I have to remove the GPU, which means pulling the case out.

Since all drives have to be disconnected every time you install Windows from scratch (which I do twice yearly), and the bottom two ports are easily accessible I put the boot drive on M2_1.

Either way, my speeds are slower than those of other people's tests here. The drives aren't very old, even the ones on M2_2 and M2_3. Quite disappointing.

Updating the chipset drivers or BIOS didn't make any difference.

When I installed the Samsung NVMe driver, it changed my driver order around in Disk Management, Macrium Reflect, MiniTool Partition Wizard etc.

please help me whenever i try to open the .exe with driver nothing happens but when i click other exe i can install them normally