New motherboard no boot


  1. Posts : 107
    Windows 10 Pro
       #1

    New motherboard no boot


    My last mobo sparked out and i think it took my cpu with it. The fans run but nothing displays on the screen.

    A couple mosfets blew on the msi 970ga 46 so i replaced it with a gigabyte 970a ud3p rev 2.1. I'm Using an amd fx 8350 be.
      My ComputerSystem Spec


  2. Posts : 529
    Windows 10
       #2

    please rephrase the question
      My ComputerSystem Spec

  3. Bree's Avatar
    Posts : 12,397
    10 Home x64 (1903) (10 Pro on 2nd pc)
       #3

    nIGHTmAYOR said: View Post
    please rephrase the question
    I think gettheclicker did, here on another thread.
      My ComputersSystem Spec


  4. Posts : 529
    Windows 10
       #4

    You should have got a new PSU along with the new board as sparking means both got busted , I can't really recommend at this point you switch the PSU since you have already lost enough money swapping a CPU then a board , but if you still got money to spare then do get yourself a proper PSU .
      My ComputerSystem Spec


  5. Posts : 107
    Windows 10 Pro
    Thread Starter
       #5

    It is a good psu. An EVGA with the golden logo which I'm told means it's advertising actual power at 1000watts. It has all the safety features to preserve itself in case of potential failure.
      My ComputerSystem Spec


  6. Posts : 529
    Windows 10
       #6

    gettheclicker said: View Post
    It is a good psu. An EVGA with the golden logo which I'm told means it's advertising actual power at 1000watts. It has all the safety features to preserve itself in case of potential failure.
    well there is no such thing as an immortal PSU , and when it bust it does exactly that , with some lines functioning and powering parts of the board , and some don't . any ways if you want honesty this is where you take the thing to the shop . they need to visual examine things mind you test what hardware have failed , this requires resources i doubt you have .
      My ComputerSystem Spec



  7. Posts : 107
    Windows 10 Pro
    Thread Starter
       #7

    The new 8350 is in, the old one is out, and here I am. 15 mins booted up and so far so good!


    Update - I'm a little concerned about the temps. On the MSI board with the H150i Pro I could keep the 9370 down to 20c average and 15c on idle.

    Gigabyte board with the same cooler and the 8350 it runs a bit warmer... 44c

    Any Ideas?
    Last edited by gettheclicker; 1 Week Ago at 15:14.
      My ComputerSystem Spec

  8. CountMike's Avatar
    Posts : 15,343
    W10 Insider + Linux
       #8

    gettheclicker said: View Post
    The new 8350 is in, the old one is out, and here I am. 15 mins booted up and so far so good!


    Update - I'm a little concerned about the temps. On the MSI board with the H150i Pro I could keep the 9370 down to 20c average and 15c on idle.

    Gigabyte board with the same cooler and the 8350 it runs a bit warmer... 44c

    Any Ideas?
    Check CPU/core voltage, many BIOS would set voltage too high without a cause.
      My ComputersSystem Spec

  9. stormy13's Avatar
    Posts : 258
    Windows 10 Pro
       #9

    gettheclicker said: View Post
    Update - I'm a little concerned about the temps. On the MSI board with the H150i Pro I could keep the 9370 down to 20c average and 15c on idle.
    Somehow doubt that the old ran that cool. Unless you live in a refrigerator it is physically impossible for even the best water cooling setup to get below room temperature.
      My ComputerSystem Spec


  10. Posts : 107
    Windows 10 Pro
    Thread Starter
       #10

    It was voltage.
      My ComputerSystem Spec


 

Related Threads
Hello, I wasn't sure where to post this so I posted it here. I installed a new mobo, processor, and RAM into my computer today. When I booted it up, all seemed to be going well, until my computer got stuck on the "Getting Devices Ready" screen,...
Though this is about Win 7 but I think it will be same for others also. I have Win 7 running on AMD and I am trying to run my hard-disk on new Intel. I could not boot. I have new motherboard drivers. I tried to install these while my hard disk still...
I created USB bootable repair media. Diskpart tells me that each is MBR formatted, not GPT. These were created on a Win10 machine. One USB contains WinPE alone. I can boot it on my Lenovo Thinkpad, but cannot boot on my desktop that has ASRock...
Upgraded motherboard, much slower boot time in Performance & Maintenance
I feel like windows 10 is back to Vista performance at boot. I'm thinking about a clean install but would like to discuss it with you guys. Previous motherboard and CPU: Asrock Pro3 Gen3 i2500k @ 4.5 GHz, 16 GB Ram. New motherboard and CPU: Asus...
Hi guys first post here , BIOS Version/Date Phoenix Technologies, LTD ASUS M2N-E SLI ACPI BIOS Revision 0801, 25/04/2007 This is an older MB and I have installed Windows 10 as a fresh install now and its running nicely . The Question is...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:43.
Find Us