Convert RAID 0 array to regular drives? Solved

Page 2 of 2 FirstFirst 12
  1. bro67's Avatar
    Posts : 6,452
    Mac OS High Sierra 10.14.3 Beta (18D21c)

    It will not boot until you install in the OS in regular mode. It does not matter about the SSD.
      My ComputerSystem Spec

  2.    #12

    Thank you, bro67! So, do you mean I have to first set the SATA to AHCI, then restart from an installer disk and reinstall the whole system?
      My ComputerSystem Spec

  3. bro67's Avatar
    Posts : 6,452
    Mac OS High Sierra 10.14.3 Beta (18D21c)

    Yes as was stated before. Otherwise it will not work.
      My ComputerSystem Spec

  4.    #14

    Thank you for this info, bro67. I appreciate your help!
      My ComputerSystem Spec

  5.    #15

    After setting SATA to AHCI and reinstalling Windows, I was able to reformat my drives into basic volumes and both appear healthy, which is a better result than I even hoped for! Thanks again for all your help! :)
      My ComputerSystem Spec

Page 2 of 2 FirstFirst 12

Related Threads
Solved M.2 NVMe SSDs in Raid 0 array? in Drivers and Hardware
ASRock Z370 Professional Gaming i7 LGA 1151 mobo Samsung 960 PRO M.2 NVME PCIe SSDs M.2 drives in M.2 slots 1 and 3 on mobo Can a RAID 0 array be created with the 2 drives? Is it advisable to do so? (I have learned over the years that...
Hi folks I've been using a server for a few years now running 24/7 (OS on SSD and data on a RAID 0 arrary of 4 X 5 TB HDD's) -- I know if I get a fail I lose the whole array but a lot of data is multi-media etc which isn't changed a lot and I...
Solved Recreating RAID 5 Array AMD in Drivers and Hardware
I updated to Windows 10 Pro with a clean install and had issues with my RAID array showing up as raw format. I was able to take a backup of it from my W7 drive then rebooted into W10 deleted the array in Disk Management, deleted the array in the...
Hi Guys, I had 3 x 2TB drives in RAID 5. Added a 4th 2 TB drive to the Archive R: array and migrated the data using Intel Rapid Storage. Expanded the volume in Disk Managment. But windows doesn't seem to see the new size?.How do I get Windows to...
Having gone from windows 7, to 8 to 8.1 to 10 without a reinstall I've started to have a few issues so I've just reinstalled windows to a new drive. Trouble is, I didn't think too much and left the old RAID array connected so the recovery and EFI...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:54.
Find Us