"HDD/SSD failure detected" error when USB drive plugged in

  1.    #1

    "HDD/SSD failure detected" error when USB drive plugged in


    Hi all
    Having a slightly odd problem. I just moved across the world and took parts of my PC with me but not all - I replaced the case and power supply in my new country. Since rebuilding everything it works completely fine, identical setup, but for some reason when I have my external HDD plugged in (which I had 24/7 back home), I get an error prior to boot indicating that my drive(s) are critically failing and "could crash at any moment". However there is absolutely nothing wrong with aforementioned drive, if I plug it in after booting normally I can browse my files and use my PC just fine. What's the deal? Any thoughts would be much appreciated. Thanks
      My ComputerSystem Spec

  2. Caledon Ken's Avatar
    Posts : 14,186
    Windows 10 Pro x64 Build 1809
       #2

    Hi arisutan

    Is the data on your external HDD backed up? I would do this prior to diagnosing, just in case.


    Have you check your your boot order, any chance the USB device is prioritized in boot order?

    Have you run chkdsk /r on drive?

    If you post a screen shot of drive it might help a member diagnose what is going on.

    Disk Management - How to Post a Screenshot of

    Usually disk management shots don't contain personal data, please review before actually posting. You can blank out names with Paint.


    Ken
      My ComputerSystem Spec

  3.    #3

    when I have my external HDD plugged in.....I get an error prior to boot indicating that my drive(s) are critically failing
    This is a S.M.A.R.T. error, meaning exactly what it says, this drive may fail at anytime. You can still access it and it will seem fine but soon it is going to fail.
    What is the make and model # of the External Drive inside the Enclosure?
    As stated, you can start by pressing the Windows key +X and choosing Command Prompt (Admin) or Powershell (Admin) at the prompt type the drive letter of the External drive (ie) T: and press enter. Then type chkdsk /R and press Enter. then type a Y for Yes to Unmount the drive. This may take a very long time. If it hangs for several hours, like overnight or fails, the HDD needs to be replaced. I would also do this on your C: drive. Or you can run the HDD manufacturers Diagnostic tool. Make sure data on the drive is backed up to another drive before doing any Troubleshooting. Be prepared to replace the HDD.
      My ComputerSystem Spec

  4. thomaseg1's Avatar
    Posts : 373
    Windows 10 Professional (x64) Version 1809
       #4

    one other thing to check, Apart from the good suggestions above, is the voltage going to it, Are the plug and outages of them compatible with where you moved from?
      My ComputersSystem Spec


  5. Posts : 25,407
    windows 10 professional version 1607 build 14393.969 64 bit
       #5

    1) Find a camera or smartphone camera > when you see the error message take a picture > upload an image into the thread

    How to Upload and Post Screenshots and Files at Ten Forums

    2) Run HD Tune (free version) (all drives)
    HD Tune website
    Post images into the thread for results on these tabs:
    a) Health
    b) Benchmark
    c) Full error scan


    3) Run Sea Tools for Windows (all drives)
    long generic test
    Post an image of the test result into the thread
    SeaTools for Windows |
    Seagate

    How to use SeaTools for Windows | Seagate Support US
      My ComputerSystem Spec


 

Related Threads
Icon Changer (Damian's Homepage) complains about lack of .net, despite .net 4(.5) and 3(.5) being preinstalled on Windows 10. Does it run on .net 2 or something else ancient?(running Windows 10 LTSB from July 2015)edit: probably better suited in...
Hello, my bsod was solved after updating the nvdia few months ago but then it started again, there wasn't any blue screen when i use AutoDesk maya 2 months ago but now it keep having blue screen when i use maya for like 1 - 2 minutes. Thanks for the...
I just began getting this error yesterday. :cry: What is the likelihood that another issue besides a failing hard drive is causing error? Secondly, I've already purchased a new hard drive as a precaution. What is the fastest/easiest way to...
I recently upgraded to Win 10, also installed Office 2016 Pro Plus. My Brother all in one printer scanned to email easily on Win 7, no longer does, Brother could not figure it out. I tried sending to email from Word, get "mapi failure, unspecified...
Please help. When my Toshiba Satellite L655 laptop was rebooted I got the above error. This laptop was upgraded from Win 7 to Win 10 about a month ago. I don't know if this is related or not but two days prior to this error today, the battery...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:55.
Find Us