Windows 10: PC won't wake from S3 Sleep after Win 10 upgrade

  1.    03 Aug 2015 #1

    PC won't wake from S3 Sleep after Win 10 upgrade

    This was working fine on Win 8.1, but since my upgrade my PC now won't wake up from any keyboard, mouse or PC power button press once in S3 sleep or hibernation.

    The only way to wake the PC is to reach back to the PSU and turn the power off, wait 5 seconds, then turn the power back on. I can then press the power button on the front of the PC and Windows then resumes from sleep.

    powercfg /A returns this:

    The following sleep states are available on this system:
    Standby (S3)
    Hybrid Sleep
    Fast Startup

    The following sleep states are not available on this system:
    Standby (S1)
    The system firmware does not support this standby state.

    Standby (S2)
    The system firmware does not support this standby state.

    Standby (S0 Low Power Idle)
    The system firmware does not support this standby state.

    I have the latest firmware on my relatively new Gigabyte 970A-D3P. Any ideas?
      My ComputerSystem Spec

  2.    18 Nov 2015 #2

    Were you able to solve this issue?
      My ComputerSystem Spec

  3.    18 Nov 2015 #3

    The problem is the new windows update .
    Sleep works but hybrid sleep dont work.
    Please disable hybrid sleep and tell me if sleep works .
      My ComputerSystem Spec

  4.    18 Nov 2015 #4

    Yes, thanks, it helped for the moment, but I don't consider this a final solution. For me hybrid sleep is very convenient. Probably better to go back to 7.
      My ComputerSystem Spec

  5.    19 Nov 2015 #5

    do u have nvidia video card? when u hybrid sleep the pc, when u try to wake up, u take a black screen and the fan of the video cards go at full rpm?
    i clean install windows 10 and same probem,
    lets wait for new video card drivers or a fix for microsoft.
      My ComputerSystem Spec

  6.    19 Nov 2015 #6

    Yes, Nvidia video card, no - when I press power to wake it up, it will just stay dead. I have to turn off power cable for a few seconds, return it, THEN computer will respond to power btn. Never happened on Windows 7.
      My ComputerSystem Spec


Related Threads
Came across my first major problem. When I try to go into sleep mode (either through the Start menu or pressing the power button), the hard drive light blinks for a second then the screen goes black. BUT... my power light stays on (should be...
Hi all, After upgrading to Windows 10, my PC will not go to sleep automatically nor will the displays turn off after the specified time (10 minutes). If I put it to sleep manually from the Start menu, it will go to sleep and usually stays that...
Surface Pro sleep/wake buttion in Drivers and Hardware
i just installed W10TP (9926) on my surfacepro. i got everything working but the sleep/wake button i got the driver pack but the device manager says everything is good... do you know where i can find the driver? Thanks!
will not wake again in General Support
Hi all, After the last build my Pc would not wake up, after some tweeking i decided to re-set all the Bios power settings to the Mother board manul`s default settings. Its worked fine up untill yesturday now I have to press the re-set button to...
pc would not wake up in General Support
I have posted that my pc was working fine with windows 10TP. today i left the machine (working doing its updates etc (left turned on)). when after a few hours i went to use the pc it would not wake up i had to unplug at the mains to get it going...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 01:36.
Find Us