Windows 10: HDD Partition becomes unallocated after Windows 10 installation.

Page 1 of 2 12 LastLast
  1.    01 Aug 2015 #1

    HDD Partition becomes unallocated after Windows 10 installation.


    I have a SSD where my operating system is installed.

    I also have a 3 3TB drives.

    A 746.52 partition on one of the drives became unallocated after installation of windows 10.

    I've managed to recover all the data from the unallocated partition. Would now like to fix the partition.

    I think it may be something to do with MBR/GPT?

    Here's a screen print from disk management.

    Click image for larger version. 

Name:	screen print.png 
Views:	82 
Size:	356.9 KB 
ID:	27559

    Any help appreciated.
      My ComputerSystem Spec


  2. Posts : 67
    Windows 7 SP1, Home Premium, 64-bit
       01 Aug 2015 #2

    Can you boot with Disc 0 completely disconnected?

    I'd guess you can. If so, I don't think you need partition I on disc 0.

    You should be able to make disc 0 to behave like disc 2, which is also a 3 TB drive. Disc 0 appears to be initialized as MBR. If you want it do be like disc 2 with a single partition covering the entire 3 TB, you'd need to re-initialize it as GPT, just like disc 2. You'd have to move that data off of the J partition and then delete the J partition to do that. I think there are applications that say they can convert from MBR to GPT without losing data, but I wouldn't trust that. I'd plan to wipe that drive and start over--but you first need to confirm you can boot with disc 0 disconnected.

    Was that drive 0 connected when you installed to the SSD? If so, usually a bad idea to have more than 1 drive connected.
      My ComputerSystem Spec

  3.    01 Aug 2015 #3

    The fatal error was not disconnecting the other HDD, which I usually do. Just got sloppy!

    Thanks for the reply.

    I was hoping to find a way to get the unallocated partition working, bought a new 3tb drive today to clear J and start from scratch in case this was a non starter.

    Anyone have an idea what caused the problem?
      My ComputerSystem Spec


  4. Posts : 67
    Windows 7 SP1, Home Premium, 64-bit
       01 Aug 2015 #4

    winstainforth said: View Post
    I was hoping to find a way to get the unallocated partition working,
    You can't "get it working" as is. It's not a partition. It's unallocated space. MBR discs aren't going to recognize 3 TB on a disc--only a little over 2 TB.

    You can start over with that disc, initializing it as GPT. As I mentioned in my first post.
      My ComputerSystem Spec

  5.    06 Aug 2015 #5

    Were you able to fix it, and how did you recover the data? I am having the same issue and was not sure what to do. I would have sent you a PM but I have less than 5 posts.
      My ComputerSystem Spec

  6.    25 Aug 2015 #6

    All,

    I just registered here to share this thread:

    http://answers.microsoft.com/en-us/w...c-cc3c510d5f26

    MS hasn't been very helpful, but there is some advice there which may be of use in recovering your data.
      My ComputerSystem Spec


  7. Posts : 2
    Windows 10 Home (x64) Version 1511 (build 10586.104)
       17 Feb 2016 #7

    try reinstalling the driver!


    I had the exact same problem. running a Seagate HDD with 6TB, 2TB C:/ and 4TB for storage

    I spent 2 weeks trying out various recovery programs, popping it into a toaster and seeing if I could pull the data off the unallocated storage onto an external, and even booting into a live USB of Lubuntu but nothing was working.

    Then I tried running the seagate tool that came with it and it gave me a flag saying that it needed the Virutal Disk Driver to be installed

    I installed the driver, gave the partition a letter and presto, all files and the partition were back good as new!

    yup, all that effort for 2 weeks when all that happened was that the upgrade from 7 to 10 deleted a driver.


    Here's to hoping my experience will help others especially since this board was a top result when search for answers!
      My ComputerSystem Spec


  8. Posts : 1
    Windows 10 Pro Insiders Preview 14267
       21 Feb 2016 #8

    My machine boots to Windows 10 insiders preview, or Windows 8.1. Windows installations are on separate hard drives. Upon the previous major update to build Windows 10 insiders preview, build 14257, my secondary hard drive popped up as unallocated in Windows 10. Not only that, it couldn't be accessed by diskpart, or other various and sundry partition software out there. It's a 1 TB WD Black hard drive. It was working fine in Windows 10, before the update. In fact when I boot to Windows 8.1 it still works fine and all my data is intact. So. Check your drivers, before you go purchasing new hardware or losing critical data. In my case it was the sata driver for my asus motherboard. Once I installed that. The drive popped back into drive manager as active and healthy. I just had to give it a drive letter, and it was back to normal in Windows 10.
      My ComputerSystem Spec


  9. Posts : 2
    Windows 10 Home (x64) Version 1511 (build 10586.104)
       24 Feb 2016 #9

    michaelshepard2 said: View Post
    I don't think it has something to do with MBR/GPT. it seems that files sytem of the partition gets damaged. To make the partition work again, you can simply format it since you have recovered all data from it.

    For me it was because the "virtual driver" for seagate was erased by the upgrade from win7 to win10. Because of that same issue it prevented me from recovering the files even through mini tool recovery and various other programs (even dual booting into linux did nothing). Yes I could see the files in the recovery tools but I couldn't extract them. Of course after I figured out what was going on I simply re-installed the virtual driver which recognized the 3TB partition and then I gave it a drive letter and everything was there, none the worse for wear.


    I won't deny, I was one step away from just reformatting it but luckily I didn't because I would've kissed a TB or so of files goodbye, plus knowing what I know now, it wouldn't have resolved the issue.
      My ComputerSystem Spec

  10.    01 Oct 2016 #10

    Scanned drive with mini-tool for 24 hrs!! Unnecessarily!!


    I scanned my hard drive for 24 hrs with mini-tool! .. before I realized that I only needed to uninstall hard drive driver to let it re-install!! Uggggg!! All working well now . (Almost reformatted also ... so. glad. I . didn't .) Thanks!!
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Windows 10 Upgrade OEM Reserved Partition in Installation and Upgrade
I upgraded my custom built desktop from Windows 8.1 Pro With Media Center (Originally Windows 7 Pro Retail), and I've noticed I now have an OEM (Reserved) partition on my drive. I'm just about to do a clean install, and would like to know if it's...
Solved Windows 7 to 10 Partition Question in Installation and Upgrade
So I have Windows 7 and have 2 partitions on my SSD/HD hybrid drive. I made C: and D: drives. The C: drive is for Windows and D: for everything else. My C: drive is 50 gb and says 10 gb left and D: is 881 gb with 849 gb left. My idea was to just...
Hey there, I am trying to install Windows 10 10130 onto my laptop's blank partition that is 400 GB. Upon installing I noticed it gives me an error that says "We couldn't create a new partition or locate an existing one." I'm not sure what this...
I just built a custom pc with a new mobo. The hdd is used and has 8.1 on it which is not legal on this mobo. I can't really afford to buy 8.1 again. Especially since 10 is free. I burnt 10 to a disk and when I try doing a clean install I get a...
I have no idea why (at least I think I have partitions) that either have been not fully been removed by Windows 10 and now it is damaging my Windows 8.1 install ..am I thinking this is correct, and if it is, how can i fix this? Matt
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:53.
Find Us