Windows 10: Drive letters/numbers keep changing

Page 1 of 3 123 LastLast

  1. Posts : 30
    Windows 7 64 bit
       13 Mar 2018 #1

    Drive letters/numbers keep changing


    I'm running Win 10 Pro.

    I have two hard drives in my PC, both are exactly the same - I use Acronis TrueImage to regularly clone one drive to another as a backup. I've done this for a long time on my old PC running Win 7 64-Bit but have recently bought another PC (spec'd by myself) that's running Win 10 Pro.

    I should say that this doesn't affect the booting of the PC, it always boots the correct drive with the most current data, it's just that if I go into Disk Management the PC sometimes states that drive 0 has letter D assigned to it and drive 1 has letter C assigned.

    What SHOULD be the case is that drive 0 is always C and drive 1 is always D. The only way that I can revert it to this order is by messing around in the BIOS and often swapping the SATA cables around.

    I should re-stress that the PC still always boots to the correct drive with the most recent data (I can tell by the contents), it's just the numbering/letters that get swapped around.

    I suspect that Windows updates (any updates) and subsequent reboots are causing the problem.

    How can how set things so that drive 0 is always C and drive 1 is always D?

    Part of the reason that I want to do this is because when I clone the drives I like to clone low to high, so drive 0 overwrites drive 1 - with the swapped letters/numbers I may one day, by accident, clone OLD data over NEW data .........

    My PC has an ASUS Prime B350-Plus motherboard, AMD Ryzen 5 1600 CPU, NVIDIA GeForce GTX 1060 6GB video card, 2 x 2TB hard drives, 8GBytes RAM, DVD/Blu-ray drive
      My ComputerSystem Spec

  2.    13 Mar 2018 #2

    The problem is when windows sees a new drive it writes a signature to it so it know what it is if you clone a drive and both are in at the same time windows can get confussedas it sees the same signature for both drives. The o/s doesnt always boot disk 0 it boot the one with an active parition.

    Its simpler to make iamges to the second drive and with compression you can get a lot of images on a drive so you can role back if you image a drive then find its infected you have both infected with images you can go back to an earlier image
      My ComputerSystem Spec

  3.    14 Mar 2018 #3

    Windows always labels any drive/partition you run them from as C:, you can't have 2 disks/partitions with same letter in one windows session.
      My ComputersSystem Spec


  4. Posts : 30
    Windows 7 64 bit
    Thread Starter
       14 Mar 2018 #4

    Thanks for the replies. The thing is, I didn't have this problem with Windows 7. So what in Windows 10 doing that is different?
      My ComputerSystem Spec

  5.    14 Mar 2018 #5

    WinTenner said: View Post
    Thanks for the replies. The thing is, I didn't have this problem with Windows 7. So what in Windows 10 doing that is different?
    Nothing is different in that regard with disks/partitions and their letters. It's all same since first DOS.
      My ComputersSystem Spec


  6. Posts : 30
    Windows 7 64 bit
    Thread Starter
       14 Mar 2018 #6

    CountMike said: View Post
    Nothing is different in that regard with disks/partitions and their letters. It's all same since first DOS.
    Thanks, but why then do I have this issue under Win 10 and not Win 7 ? :)
      My ComputerSystem Spec

  7.    14 Mar 2018 #7

    WinTenner said: View Post
    Thanks, but why then do I have this issue under Win 10 and not Win 7 ? :)
    You have two identical disks and it's up to BIOS to choose which one to boot from. Can we have computer description and picture of your Disk management ? Your W7 might have been installed in legacy BIOS mode and W10 as UEFI, that could explain the difference in BOOT order.
      My ComputersSystem Spec


  8. Posts : 30
    Windows 7 64 bit
    Thread Starter
       14 Mar 2018 #8

    CountMike said: View Post
    You have two identical disks and it's up to BIOS to choose which one to boot from. Can we have computer description and picture of your Disk management ? Your W7 might have been installed in legacy BIOS mode and W10 as UEFI, that could explain the difference in BOOT order.
    My PC has an ASUS Prime B350-Plus motherboard, AMD Ryzen 5 1600 CPU, NVIDIA GeForce GTX 1060 6GB video card, 2 x 2TB hard drives, 8GBytes RAM, DVD/Blu-ray drive

    Here's a screenshot of the Disk Management program:

    Click image for larger version. 

Name:	disk parts jpg.jpg 
Views:	4 
Size:	166.9 KB 
ID:	180850
    Last edited by WinTenner; 14 Mar 2018 at 06:23.
      My ComputerSystem Spec

  9.    14 Mar 2018 #9

    You can paste the picture in your post. Stil waiting for Pfotobucket to load it.
      My ComputersSystem Spec

  10.    14 Mar 2018 #10

    Why are you cloning anyway?

    This is a very inefficient use of disk space and decidedly unflexible.

    It makes far more sense to create image backups, and then you can have backups at different stages so you can revert to an earlier version if unexpected issues arise.

    Not only that, it is a good idea to periodically backup images to an external drive. It has been known for a pc failure to fry both disks, and also for hackers to "ransom" online drives.


    Making a single clone to an internal drive does not give you adequate data backup integrity.
      My ComputerSystem Spec


 
Page 1 of 3 123 LastLast

Related Threads
I put Office 365 on my mother's computer under my 365 Home license. She's using outlook.com as her email and Outlook as her email client on her computer. Outlook wasn't syncing her email I think due to Microsoft switching to Exchange and deleting...
Using B: or even A: as drive letters in Drivers and Hardware
I stumbled of a support question in a game forum, the guy had bought a new HDD and seemingly assigned its drive letter to B: . :eek: Now, for us older geeks we do recall that A and B was reserved for floppy, but it seems Windows still has issues...
I'm talking about the keypad at the right end of the keyboard. When I press some number keys, apps open; if I use the numbers at the top of the keyboard, they work as usual. I can't find this specific issue anywhere online. 94679 1 opens...
Does anyone know how to prevent Windows 10 from changing controller id numbers almost every time I reboot? Some way other than having to unplug and plug the controllers back into the usb ports each time to get them back in the proper order.
When I click on a folder to share it, it gives me the usual homegroup options. However, there is another option now and I don't know what it is. It's a string of 20 numbers and letters. See the attached picture for reference. Thanks
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:17.
Find Us