Windows 10: I have an issue with my pendrive. Solved


  1. Posts : 19
    Microsoft Windows 10 Home 32-bit 14393 Multiprocessor Free
       3 Weeks Ago #1

    I have an issue with my pendrive.


    Today I plugged in my flash drive, but when I tried to open it, it said "Please insert a disk into (H"

    I just wanted to reinstall my Windows 10 from flash, because it became very slow, and I can format my SSD from startup when installing, and that is better way.

    Model: TOSHIBA TransMemory USB Device

    Click image for larger version. 

Name:	Screenshot_2.png 
Views:	3 
Size:	148.7 KB 
ID:	174728
      My ComputerSystem Spec

  2.    3 Weeks Ago #2

    I do believe it has died. If the controller in the USB key can't see the memory chips (or they don't work any more) Windows reports "insert disk".

    You'll have to buy a new one I'm afraid.
      My ComputerSystem Spec


  3. Posts : 19
    Microsoft Windows 10 Home 32-bit 14393 Multiprocessor Free
    Thread Starter
       3 Weeks Ago #3

    I had watched a tutorial video before it and I did something wrong or something, but I retyped something and I got an error of it, I forgot which or where I saw that video but I also commented but I didn't got any answer.
      My ComputerSystem Spec

  4.    3 Weeks Ago #4

    I doubt you did anything wrong. Pendrives don't last a long time - especially if you write to them a lot.
      My ComputerSystem Spec


  5. Posts : 5,451
    10 Home x64 (1709) (10 Pro on 2nd pc)
       3 Weeks Ago #5

    lx07 said: View Post
    I do believe it has died. ... You'll have to buy a new one I'm afraid.
    Hungaryball said: View Post
    I had watched a tutorial video before it and I did something wrong or something, but I retyped something and I got an error of it, I forgot which or where I saw that video but I also commented but I didn't got any answer.
    Not necessarily a dead USB. Here's one way to reproduce the problem. From a Command Prompt (Admin) run Diskpart....
    Code:
    Microsoft DiskPart version 10.0.16299.15
    Copyright (C) Microsoft Corporation.
    On computer: TOSH-L750
    
    DISKPART> LIST DISK
    
      Disk ###  Status         Size     Free     Dyn  Gpt
      --------  -------------  -------  -------  ---  ---
      Disk 0    Online          465 GB      0 B
      Disk 1    Online           14 GB    14 GB
    
    DISKPART> SELECT DISK 1
    Disk 1 is now the selected disk.
    
    DISKPART> CLEAN
    DiskPart succeeded in cleaning the disk.
    DISKPART>
    Because it now contains no partition information, File Explorer will respond to this USB with 'please insert a disk into USB Drive...'. To be able to work again, this usb needs a partition, - in Diskpart you can make one with...
    CREATE PARTITION PRIMARY

    Diskpart or File Manager can then be used to format the new partition as appropriate.
      My ComputersSystem Spec

  6.    3 Weeks Ago #6

    Bree said: View Post
    CREATE PARTITION PRIMARY
    Worth a try certainly.

    I could be wrong - it is a day for it apparently
      My ComputerSystem Spec


  7. Posts : 19
    Microsoft Windows 10 Home 32-bit 14393 Multiprocessor Free
    Thread Starter
       3 Weeks Ago #7

    Thank you @Bree ! Now I can finially use my pendrive again!
      My ComputerSystem Spec


 

Related Threads
USB Pendrive problem in Drivers and Hardware
Good morning to all. Since the latest windows 10 update, When I insert a usb pen drive into usb port on my laptop it don't show up I have to go into the File explorer to open the drive,And this is the same with a usb hdd. Been looking in the auto...
When I insert my pendrive in Laptop or Desktop PC, it shows on in My Computer but when I try to open it, it says " Please insert disk into USB Drive". When I right click on the drive and want to format, it says there is no disk in the drive. When I...
Macrium Reflect bootable pendrive in Backup and Restore
Is it makes any difference if we restore a 64 bit macrium image with a 32 bit MR bootable Pendrive or restore a 32 bit macrium image with 64 bit MR bootable pendrive?
I have one Sandisk USB 2 OTG pendrive which can work on mobile and PC/Laptop. When I plug into the port the message pops up as sd/mmc card. I have recently burned on it one iso with Rufus 2.4 with multi bootable OS of 7, 8.1 and 10 bootable. I...
I have a 8GB Kingston pen-drive that refuses to be formatted. I noticed that it's write protected and tried to make it usable again, but nothing works. First I tried DiskPart as follows... ... but after all it remains protected ! I also...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:15.
Find Us