New
#51
Its supposed to fix the Issues 3xxxxx caused....you are lucky you never updated....I would not rush at it , Drives that came with 3xxxx seem okay ,Older Drives updated from 2xxxx in some cases are not , however 4xxxxx is working well from what I have read so far....
In this case "If it ain't Broke , don't fix it" is wise at this point. It's why I started the thread as most reports on Samsung's Forums did the Magician Update Blindly without checking things out 1st. I was checking things out as mine keeps dropping to PCIe2 x4 Sppeds and I was checking their Forum to see if Others had the same Issue.
AFAIK the 850 Series has not had or needs a FW Update , not lately anyway...
KB.
It was mainly for the eDrive Update I think , (part of M$ Bitlocker) thought I posted about that? at least I have not seen any news of other "fixes" so far..... most assume it is a "speed fix" and just have to have it :) , with Firmware I am not an Early adopter unless I have a known issue to "Fix" .
eDrive post
Samsung SSD Firmware Warning - Re: Magician Downloads - Page 5 - Windows 10 Forums
KB
Apparently Samsung will release the 2nd wave of updates after 8pm EST (USA) 5pm PST (USA) Jan 30th. if you don't see it yet.
All Reports I have seen on the Samsung Forums say the Issues are fixed for them on the 960 Pro , there is still no fix for the the 960 EVO if you have the issues with it, the release in "waves" is pissing a few off cos they still can't get it though.....
From the Samsung Moderator as well:
We received the FW about 2 weeks ago to test and tested them on affected drives that people sent in for RMA and all of them have been fixed. Samsung still requires releases to be in waves for about the first week for all releases, but the limit is in the thousands and increases daily.
@xxxxx
Other than fixing the issues brought on by the previous FW, it adds E-drive support to the drive. It looks though that bitlocker is currently limited when it comes to NVME and E-drive as it won't utilize E-drive when the NVME drive is the boot drive.
@xxxxx
When you have Magician 5.2 (has to be 5.2) open, around 8pm eastern time, wait a minute or two, and then press the refresh spinning arrows. It forces Magician to contact the server and check for any new FW. Make sure your firewall has the Magician program whitelisted.
=========================================================
UPDATED Feb.6th 2018
=========================================================
I am seeing reports on the Samsung Forums that the new 4Bxxxxx Firmware is not working
for everyone with the 960 Pro or only works for a few days and then the problems come back ,
so proceed with cautionand perhaps do some research yourself 1st.
Don't Update if you Don't have an Issue is the best Idea currently if you have the 2BXXXX FW stay with it.
=========================================================
Last edited by Kbird; 06 Feb 2018 at 12:54.