Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 69
    Windows 10 Pro x64
    Thread Starter

    Kbird said:
    When I have seen this message before , it was a Bios Post message not a BSOD and it was because an Update had screwed up the Order of the Boot Devices in the Bios and it was trying to boot off D:\ instead of C:\ when I went into the Bios to check the Boot Order, so I set the 1st device back to Windows Boot Manager and all was Well.

    I can confirm that as well. I've paused the updates for now until February or something and all is well now. So I guess problem solved. Thank you all for help! :)
      My Computer

  2. Posts : 1
    Windows 10

    Stop that

    zablablukas said:
    Hello! I've just tried turning on my PC and it shows me a BSOD saying INACCESSIBLE BOOT DEVICE. Yesterday everything was fine. I turned it off normally like always. I haven't updated any drivers either and there are no external drives or USBs connected. I liked for some solutions but none worked. I tried booting into safe mode (got the same error), I checked if my SATA options werr on AHCI (which they were). What do I do? I don't want to lose all my data!
    If you did not format anything yet, try this solution:

    Inaccessible Boot Device nach Update bei Windows 10 - die IT werkstatt Kiel

    If you dont understand german and google translator wont help you:

    you have to recover the registry backup from /windows/system32/config/regback to /windows/system32/config and rename the reg files. Before that, do a backup at least from /winsows/system32/config
      My Computer

  3. Posts : 39,972
    windows 10 professional version 1607 build 14393.969 64 bit

    When the computer is powered on now what do you see and hear?

    Use the windows 10 iso > windows advanced troubleshooting menu > command prompt
    Use a camera or smart phone camera to take pictures and post images into the thread:
    1) diskpart
    2) list disk
    3) select disk 0
    4) list partition
    5) exit
    6) c: dir
    7) d: dir
      My Computer

  4. Posts : 6
    Windows 10


    after regular update, my PC will not start, all I get is INACCESSIBLE BOOT DEVICE Error and DSOD. I can still access windows advanced troubleshooting menu > command prompt and I have been trying and trying. I have also managed to update the BIOS but no luck. I have followed tutorial from zbook, post 2. Since in step 14 I had osdevice partition=F, I typed chkdsk /r F: in step 19 - is it correct? But Im not sure what to type in step 20 instead of G...?
    Can you please help me?
    Printscreen: Dropbox - 20180315_001242.jpg
    Last edited by Alessandro; 14 Mar 2018 at 18:42. Reason: link to printscreen
      My Computer

  5. Posts : 6
    Windows 10

    OK I guessed and typed: sfc /scannow /offbootdir=F:\ /offwindir=F:\windows - seems to be running now:
    Dropbox - 20180315_005321.jpg
      My Computer

  6. Posts : 6
    Windows 10

    And I cannot continue, because after typing bootrec /fixboot, I see Access is denied.
      My Computer

  7. Posts : 6
    Windows 10

    And when I power on, it is still the sam BSOD, starting in Safe Mode not possible either, nor the restore point is working, nothing so far...this is mad
      My Computer

  8. Posts : 39,972
    windows 10 professional version 1607 build 14393.969 64 bit

    The problem with inaccessible boot device in January was related to Spectre and Malestrom.
    Microsoft responded with Windows updates that had unexpected problems:
    inaccessible boot device
    problems with USB ports
    These are the published fixes:
      My Computer

  9. Posts : 6
    Windows 10

    Thank you, first I removed this one:
    dism.exe /image:c:\ /remove-package /packagename:Package_for_RollupFix~31bf3856ad364e35~amd64~~16299.248.1.17 and it did not help, the previous package is not installed...
    Any idea what can I do please?
      My Computer

  10. Posts : 39,972
    windows 10 professional version 1607 build 14393.969 64 bit

    For these steps please use a camera or smart phone camera to take pictures and post images into the thread:
    command prompt > Administrator X:\windows\system32\cmd.exe > X:\Sources> type:
    1) c:
    2) dir
    3) d:
    4) dir
    5) e:
    6) dir
    7) f:
    8) dir
    9) g:
    10) dir
    11) bcdedit /enum
    12) bcdedit | find "osdevice"
    12) diskpart
    13) list disk
    14) list volume
    15) select disk 0
    16) list partition
    17) select partition 1
    18) detail partition
    19) select partition 2
    20) detail partition
    21) select partition 3
    22) detail partition
    23) select partition 4
    24) detail partition
    continue in this fashion for all partitions on disk 0
    and please continue in this fashion for disk 1

    Fix: bootrec /fixboot access denied in Windows 10

    If the above fails there is another option
      My Computer


  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:21.
Find Us

Windows 10 Forums