Disk management question? Solved

Page 2 of 2 FirstFirst 12
  1.    08 Jan 2018 #11

    caffeine said: View Post
    I thought you were only wanting to know how to have a drive without permanent assignment. Since you mentioned permanent assignment, there is something you need to know about that. If you assign a drive letter, that assignment works only on the local computer which was used to assign it. On all other computers , the "next available" rule applies.

    If you ever desire to be able to clearly identify the device on any computer, consider naming the device. To do so: in This PC right click the device, and choose rename. Type the name you want, and press enter. It is exactly the same as renaming folders/files.
    I hope you find this helpful also.
    Thanks for that info Caffeine. I'll bear that in mind in case I ever do want a drive letter to be permanently assigned. You are correct though I don't want permanent assignment. I want my flash drive letters to be dynamically assigned by Windows.
    I only talked about that because I wanted to be sure I'd understood how the drive lettering system worked in Disk Management. Once again..Many Thanks for your help
      My ComputerSystem Spec

  2. Posts : 23
    windows 10 pro x64 and multpile Linux distros on VMWare
       08 Jan 2018 #12

    You are very welcome.
      My ComputerSystem Spec

  3.    09 Jan 2018 #13

    caffeine said: View Post
    Don't enter a drive letter. That way Windows will automatically assign the next available letter each time the flash drive is plugged in. For example, If drives C,D,E are already assigned, then the flash drive will have a temporary assignment of F. If the next time it is plugged in only C and D are assigned, the flash drive will have a temporary assignment of E.

    If you wish to be able to easily identify the flash drive when plugged in, you can name the drive. Under This PC, right click the flash drive. Choose rename and type the name you desire. Press Enter. This name will follow the flash drive to any computer you plug it into. The process is exactly the same as renaming a folder or file.
    This morning I did as you suggested. I have only C: and D: DVDRW on my laptop. My USB flash drive was Drive E:.
    The flash drive was in GPT format because Rufus installation media had been on the disk. So I used diskpart to clean the disk and successfully converted it back to MBR. I then went to Disk Management and the disk showed unallocated space as expected after cleaning the disk. The former Drive letter E: was obviously not showing on the unallocated disk space but it was showing on the Disk button at the far left i.e Disk 1 Removable media drive E: . So I clicked on the unallocated space to create a new simple volume. The drive letter option it gave me was F: so I followed your instructions and just took it and formatted etc.
    After it had finished it showed the new volume was drive F: which is supposed to be not a fixed letter but a dynamic letter ..right?
    I took out the flash drive and reinserted it expecting to see that Windows would have dynamically assigned it with Drive E: because like I said I only have C: and D: This didn't happen, it has kept the drive letter F: I don't understand why?
    Last edited by sportsfan148; 10 Jan 2018 at 03:28.
      My ComputerSystem Spec

  4.    10 Jan 2018 #14

    There is no need to post another thread about the same subject, you are being helped here: How do i select a drive letter so that windows assigns dynamically? - Windows 10 Forums
      My ComputerSystem Spec

Page 2 of 2 FirstFirst 12

Related Threads
Solved Disk order shown in disk Management in Drivers and Hardware
140970 I read somewhere that the C directory disk should ideally be Disk 0 - as you will see, my three internal disks do not follow this pattern. Do I need to swap the signal leads at the motherboard end to correct this - or does it not really...
Hello, Got a new SSD and installed Windows 10 to it. https://gyazo.com/4088ea7e17f1f494fa39ca300dc6e2c2 Does this look correct? Or do i have some remnants from the old os or something because i have those system reserveds on the hdd. Or is...
I have a internal 3.5" HDD WD Black 2 TB and try to hook it up in the PC but it doesnt not appear anymore in My Computer. It was working few weeks ago. When opening Disk Management it says the disk is not initialized and it didnt state how many GB...
I just installed Win 10. First impression is that I'm not impressed with the new design. I think mobile devices are ruining the internet. How do I get to disk management? Is it similar to Win 7? Also, how do I get to Services and Event Viewer?
VHD in Disk Management in Virtualization
I was looking in Disk management in Win 8.1 and under the "action tab", there is a choice to; Create VHD. I can't get a shot of it to show a snip. Has anyone used this ? Would this be safe to install Win 10 with ?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:34.
Find Us