Windows 10: Favorite tech topics

Page 4 of 4 FirstFirst ... 234
  1.   My ComputerSystem Spec

  2.    6 Days Ago #32

    REset with USb : Remove unwanted desktop shortcut Icon Windows 10. - Microsoft Community

    Windows 10 Wont Boot? Fix it with Startup Repair and BootRec Commands

    change boot sequence :
    How To Change Boot Sequence in Win 10 - Microsoft Community

    Hp config boot seq : HP PCs - Configuring the Boot Order in the System BIOS | HP® Customer Support

    Asus boot seq : Windows 10 - How to boot the system from USB drive/CD-ROM? | Official Support | ASUS Philippines

    *To boot from a CD, DVD or USB device, make sure that the device has boot sequence priority over the hard drive.

    BIOS Boot

    BIOS (Basic Input Output Subsystem) is a programmable chip that controls how information is passed to various devices in the computer system. A typical method to access the BIOS settings screen is to press ESC, F1, F2, F8 or F10 during the boot sequence.

    BIOS settings allow you to run a boot sequence from a floppy drive, a hard drive, a CD-ROM drive or an external device. You may configure the order that your computer searches these physical devices for the boot sequence.

    The first device in the order list has the first boot priority. For example, to boot from a CD-ROM drive instead of a hard drive, place the CD-ROM drive ahead of the hard drive in priority.

    Before you set boot priority for a USB device, plug the device into a USB port.

    To specify the boot sequence:

    Start the computer and press ESC, F1, F2, F8 or F10 during the initial startup screen. Depending on the BIOS manufacturer, a menu may appear.
    Choose to enter BIOS setup. The BIOS setup utility page appears.
    Use the arrow keys to select the BOOT tab. System devices appear in order of priority.
    To give a CD or DVD drive boot sequence priority over the hard drive, move it to the first position in the list.
    To give a USB device boot sequence priority over the hard drive, do the following:
    Move the hard drive device to the top of the boot sequence list.
    Expand the hard drive device to display all hard drives.
    Move the USB device to the top of the list of hard drives.
    Save and exit the BIOS setup utility.
    The computer will restart with the changed settings.

    resetting windows 10 : Reset Windows 10 | Windows 10 Tutorials

    Boot to Advanced Startup Options in Windows 10 | Windows 10 Tutorials

    Create bootable media : Create Bootable USB Flash Drive to Install Windows 10 | Windows 10 Tutorials
      My ComputerSystem Spec

  3.   My ComputerSystem Spec

  4.   My ComputerSystem Spec

  5.    3 Days Ago #35

    Microsoft Edge and other Microsoft Store apps might not connect to the Internet after installing the Windows 10 October 2018 update : Microsoft Edge and other Microsoft Store apps might not connect to the - Microsoft Community

    Audio not working
    Windows 10 audio stops working after installing Intel Smart Sound - Microsoft Community

    Windows 10 desktop waking from shutdown
    Windows 10 desktop waking from shutdown - Microsoft Community

    Can't pin or unpin apps to the taskbar!
    Can - Microsoft Community

    Display name issues:
    Display name issues - Microsoft Community

    100% disk usage :
    1. Press WinKey + R and type devmgmt.msc in the Run, hit Enter key to open Device Manager 2) In the Device Manager window, expand IDE ATA/ATAPI controllers and right click on Standard SATA AHCI Controller, select Properties.
    3) In the property sheet, switch to Driver tab and click Driver Details. 4) If the Driver File Details window shows storahci.sys driver listed there, it means you’re running inbox driver and hence it is possible to disable MSI mode. Click OK. 5)Back on the property sheet, switch to Details tab. Against Property, select Device instance path from drop-down and note down the Value mentioned there. 6. Press WinKey + R and put regedit in Run dialog box to open Registry Editor (if you’re not familiar with Registry Editor, then click here). Click OK. 7)regedit :HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\<AHCI Controller Value>\Device Parameters\Interrupt Management\MessageSignaledInterruptProperties 8) 8. In the right pane of MessageSignaledInterruptProperties key, look for the registry DWORD (REG_DWORD) named MSISupported which should be corresponding to Value 1 as its Data. ) 9)set the Value data as 0 and click OK. Close Registry Editor and reboot.

    *Go back to previous build : How does one remove 1809 update that did not install or does it have - Microsoft Community
      My ComputerSystem Spec

  6.   My ComputerSystem Spec

  7.   My ComputerSystem Spec

  8.    2 Days Ago #38

    Ms store: >check for update > enabled UAC (User Account Control) >You have an active internet connection to connect to store and download apps > Your PCs minimum screen resolution is 1024 x 768 > Your Video card driver is updated >time and settings >country and region > Free some space from your C: drive > change dns

    app troubleshooter:
    Windows Store Apps Not Working Properly - Microsoft Community

    *re-register msstore w10 ::: "& {$manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + '\AppxManifest.xml' ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}"

    *re-register msstore w8 ::: Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.XML

    2)command prompt : powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml

    3)powershell: Get-AppxPackage *windowsstore* | Remove-AppxPackage ** >Get-AppxPackage -allusers Microsoft.WindowsStore | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}

    *restore built-in apps : Get-AppXPackage -allusers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}

    *HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\NetworkList\Profiles >Right click on Profiles,> select Permissions, >then click Advanced. >Tick Replace all child object permission entries with inheritable permission entries from this object > click OK. Now restart your system
      My ComputerSystem Spec

  9.    2 Days Ago #39

    Start Menu not working : 1) run windows update > run Command Prompt as Admin> ren %windir%\System32\AppLocker\Plugin*.* *.bak
    Restart Windows

    2)type SERVICES.MSC > right click on APPLICATION IDENTITY and select START

    3) powershell : Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”}

    4)Create a new user account :Family & other people.> Add someone else to this PC>I don’t have this person’s sign-in information.>Add a user without a Microsoft account>Next.

    5) Sign in with a Microsoft account instead. 6) to keep on using your Local Account, : Settings, >
    Click on Accounts -> Your email and accounts. >Under Accounts used by other apps> click on the Microsoft account, which used to be associated with the current user account >and click the Remove button.

    ***Taskbar not working : 1: Restart Windows Explorer
      My ComputerSystem Spec

Page 4 of 4 FirstFirst ... 234

Related Threads
Rules: A person chooses their favorite song (has to have lyrics) and puts a few lyrics that is their favorite in here. . So, here is an example of how to play this game: Person A: Favorite Song: Paramore "Born For This" Favorite Lyrics: I've...
MSN has new look for My Topics in Browsers and Email
I just went to MSN and clicked Windows 10 under My Topics I'm following and saw they have changed the page view format for the better. 25965

Tags for this Thread

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 09:43.
Find Us