Last One To Post Wins [130]

Josey Wales said:

Good Morning Folks .

Good morning Josey

OldMike65 said:

Good morning Josey

Good Morning Mike.

kado897 said:

Night Bill.

Good afternoon, Keith.

OldMike65 said:

Good morning Keith .....on my 1st coffee for today.

Good morning, Mike & Sammy.

AndreTen said:

Morning Keith.

What's that fuzz about Minitool? Shoul I update? Still have 9.2 or is it 9.1

Good afternoon, Andre.

paulsalter said:

Morning All

Good afternoon, Paul.

f14tomcat said:

Morning Keith, Paul, Andre, and Mike. (and 1 bot...)
No burps or grunts updating MiniTool 10.2>10.3. Just be careful if you don't have the Pro like the Roofless Maine People. There's a bundle package in the installer. Unchecky or manually undo check boxes.

And Kyhi has the v9 pro on his Rescue.

Good morning, TC and Kitties.

labeeman said:

Good Morning Mike and Sammy

Good morning Keith

Good Morning Andre

Good morning Paul

Good morning, Beeman, Buzzy & Eddy.

Caledon Ken said:

Good day all

HHD

Going to do some prep work for dishwasher install. Yesterday I suggested I would find an open ground on the plug. For those familiar with tester.... CONFIRMED, no ground. Honestly who does this?

Attachment 204629

Good morning, Ken.

Josey Wales said:

Good Morning Folks .

Good morning, Josey.

Afternoon Andre

Morning Josey

My wife's friend is becoming very stressed. Everyone who has worked around a house knows, if was easy there would be no repair people.

Caledon Ken said:

Good day all

HHD

Going to do some prep work for dishwasher install. Yesterday I suggested I would find an open ground on the plug. For those familiar with tester.... CONFIRMED, no ground. Honestly who does this?

Attachment 204629

A great deal of Older homes only have 2 wire Romex without a ground.

If you take the cover off of your electrical main panel you will see that both ground and neutral are bonded to the same point. That is OK , some people do the same at the outlet on a two wire setup by using a pigtail from neural and connecting it to the plugs ground. This would fool the tester but it probably is not a good idea.

Agree Josey but this one was "renovated" and has a newish breaker panel.

Of course this means little. Incompetence never takes a holiday.

Basement is all drywalled or I would just replace from panel

Wynona said:

Good afternoon, Keith.

Good morning, Mike & Sammy.

Good afternoon, Andre.

Good afternoon, Paul.

Good morning, TC and Kitties.


Good morning, Beeman, Buzzy & Eddy.

Good morning, Ken.


Good morning, Josey.

Good morning Wynona, Gracie, and Lucy

Caledon Ken said:

Agree Josey but this one was "renovated" and has a newish breaker panel.

Of course this means little. Incompetence never takes a holiday.

Basement is all drywalled or I would just replace from panel

If you take the cover off of your electrical main panel you will see that both ground and neutral are bonded to the same point. That is OK , some people do the same at the outlet on a two wire setup by using a pigtail from neural and connecting it to the plugs ground. This would fool the tester but it probably is not a good idea.

My basement ceiling is plastered with wire mesh in it. I would have to rip it all out . Here to replace a Panel one must be a licensed electrician and it has to be inspected.

OldMike65 said:

Good morning Wynona, Gracie, and Lucy

Morning Wynona.

Josey Wales said:

Good Morning Folks .

Morning Josey.