The Raspberry Pi Thread [4]

  1.    #1841

    Well I went here, https://aiyprojects.withgoogle.com/voice-v1/ and the download link takes me here, https://github.com/google/aiyprojects-raspbian/releases And it states "
    SD card image that supports both
    AIY Voice Kit
    and
    AIY Vision Kit
    ."
    I don't have my AIY plugged into a Pi to test it though?
      My ComputerSystem Spec

  2. caperjack's Avatar
    Posts : 4,185
    insider build 10586.3 win10 pro 64
       #1842

    I got it from there ,i downloade the orignal file at the bottom ,not sure if maybe i should use that or a updated one .. ,File finally downloaded ,i used Etcher to image the sdcard and it booted to desktop ,i'm no longer in the mood to do anymore with it ,lol
    alphanumeric said: View Post
    Well I went here, https://aiyprojects.withgoogle.com/voice-v1/ and the download link takes me here, https://github.com/google/aiyprojects-raspbian/releases And it states "
    SD card image that supports both
    AIY Voice Kit
    and
    AIY Vision Kit
    ."
    I don't have my AIY plugged into a Pi to test it though?
      My ComputerSystem Spec

  3.    #1843

    Thats the way things go for me sometimes. The last time I used my AIY I just used plain Jain Raspbian. Then started installing stuff manually for the sound etc. My plan was to use the AIY hat without all the Google stuff. I then needed that Pi for something else and that plan went on the back burner. I'll have another go some time this summer.
      My ComputerSystem Spec

  4. caperjack's Avatar
    Posts : 4,185
    insider build 10586.3 win10 pro 64
       #1844

    yeah,i may never use it on a daily basis for sure,wish i could learn code ,[and hook light and things to the hat ]but i cant,i try reading,the next day i just forget everything i read the day before ...and im starting to think my memory is getting worse actually

    alphanumeric said: View Post
    Thats the way things go for me sometimes. The last time I used my AIY I just used plain Jain Raspbian. Then started installing stuff manually for the sound etc. My plan was to use the AIY hat without all the Google stuff. I then needed that Pi for something else and that plan went on the back burner. I'll have another go some time this summer.
      My ComputerSystem Spec

  5.    #1845

    caperjack said: View Post
    yeah,i may never use it on a daily basis for sure,wish i could learn code ,[and hook light and things to the hat ]but i cant,i try reading,the next day i just forget everything i read the day before ...and im starting to think my memory is getting worse actually
    I'll likely be doing things like that with mine and I'm more than happy to share my code. I have other things on the go before I get to it though. You might have to wait a while, I seem to misplaced my round 2it.
      My ComputerSystem Spec

  6. caperjack's Avatar
    Posts : 4,185
    insider build 10586.3 win10 pro 64
       #1846

    thanks for the offer ,might take you up on the offer when you get to doing it .., last time i was ordering knitting stuff for my wife on amazon i bought one of there controlling AC devices just for the heck of it ,it was ,$9.99 I should be able to follow the instructions there .to make it do something
    Controlling AC Devices with Raspberry Pi | Raspberry Pi Relay Control
    alphanumeric said: View Post
    I'll likely be doing things like that with mine and I'm more than happy to share my code. I have other things on the go before I get to it though. You might have to wait a while, I seem to misplaced my round 2it.
      My ComputerSystem Spec

  7.    #1847

    From the looks of it the Pi's 3.3V logic high turns on a transistor. That is a very low current draw from the GPIO pin driving it and won't hurt the Pi. A couple of milliamps maybe?
    The transistor then feeds the Pi's +5V to the relay turning it on. That will draw more current but its coming from the +5V pin on the GPIO which is only limited by the Pi's poly fuse. It's pretty well coming right from your power supply.
    Even if you draw too much current the poly fuse will just trip. I would think its maybe 10 to 20 ma or so to turn on the relay? No big deal, not even close to anything that would trip the poly fuse.
    Then on the output side of the relay you have the Normally Closed, common, and Normally open contacts. They are completely isolated from everything else. Just think of it as a switch the relay switches.
    Last edited by alphanumeric; 15 Mar 2019 at 04:21.
      My ComputerSystem Spec

  8. caperjack's Avatar
    Posts : 4,185
    insider build 10586.3 win10 pro 64
       #1848

    thanks for the info ,its possible i might even get around to trying it one day
    alphanumeric said: View Post
    From the looks of it the Pi's 3.3V logic high turns on a transistor. That is a very low current draw from the GPIO pin driving it and won't hurt the Pi. A couple of milliamps maybe?
    The transistor then feeds the Pi's +5V to the relay turning it on. That will draw more current but its coming from the +5V pin on the GPIO which is only limited by the Pi's poly fuse. It's pretty well coming right from your power supply.
    Even if you draw too much current the poly fuse will just trip. I would think its maybe 10 to 20 ma or so to turn on the relay? No big deal, not even close to anything that would trip the poly fuse.
    Then on the output side of the relay you have the Normally Closed, common, and Normally open contacts. They are completely isolated from everything else. Just think of it as a switch the relay switches.
      My ComputerSystem Spec

  9.    #1849

    caperjack said: View Post
    thanks for the info ,its possible i might even get around to trying it one day
    Other than getting your wiring (jumpers etc) correct, all you need to figure out is how to make GPIO Pin be a high or low. Thats not all that tough from Python in Raspbian. Thats how I'd test it out anyway. Getting the AIY to do it may be a bit more involved. I'm thinking you want to make a voice activated clapper.
    https://www.amazon.ca/Clapper-Sound-...13626440&psc=1
      My ComputerSystem Spec

  10.    #1850

    I got my soldering iron out and solderd the headers etc on my Zumo for the line following light bar. Didn't do much of anything else though. Coding it up to do something is the next step. I might have a go at that tomorrow, looks like its going to be a stuck in the house rainy day anyway.
      My ComputerSystem Spec


 

Related Threads
The Raspberry Pi Thread [3] in Chillout Room
Continued From - The Raspberry Pi Thread - Page 208 - Windows 10 Forums A black version of the Pi Zero case would be nice. Or white even.
The Raspberry Pi Thread [2] in Chillout Room
Continued from - The Raspberry Pi Thread - Windows 10 Forums (200 page limit) Looks like my error message is Configuring network interfaces... ioctl: Operation not permitted. I also get a ioctl: invalid argument, I get two of them, whatever...
Hello ladies andgents! :cool: @z3r010 from SevenForums pointed mehere to share this project, but since I don't want to interrupt yourdiscussions on The Raspberry Pi Thread , I thought it would be better to create a new thread. :) It's a cool...
The Raspberry Pi Thread in Chillout Room
After spaming this thread , https://www.tenforums.com/windows-10-news/3950-new-raspberry-pi-2-now-windows-10-support.html I figured a new thread may be in order. I have a B+ and one of the new model 2 B's. I just fired up Raspbian on the new one to...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:26.
Find Us