Windows 10: Blue screen at start-since up to 1703-KB4041676 won't load and more

Page 3 of 6 FirstFirst 12345 ... LastLast

  1. Posts : 82
    Win Pro 10x64 1709 16299.19
    Thread Starter
       05 Nov 2017 #21

    The box is maybe 4/5 years old.

    Have a new Nvidia card GT610 in it now instead of the onboard which I think was one of my major problems.
    Nothing else has been changed. Everything seems to be running quit fast now.

    Still find that some links in the right click Start Men such as Events etc and I get this message..
    Admin has blocked you from running apps mme.exe and eventvwr.exe

    No haven't had any visable trouble with drives, so didn't expect to see drive probs. All are auto defraged.

    Major trouble was boot up and blue screen atikpag but I think that was the onboard graphics now not in use.

    Yes I had a clone done before we started this update, but I will do another now up until now.

    Will check other drives now to see how current backups are.

    I use SyncBack Pro on other drives and Acronis TI for image and clones.

    I'm not sure what URL you mean to post.

    When should I do these?

    1) chkdsk /x /f/ r
    2) HD Tune error scan

    EDIT.. Just seen this under Security and Maintenance
    Reconnect Your Drive
    Your file history drive wasa discionnectd for too long.
    Reconnect itthentap or click to save copies of your files

    ------------
    5) create a brand new restore point
    6) run HD Tune with
    a) health scan
    b) benchmark
    c) error scan (run the full scan: this may take several hours)
    7) run chkdsk /x /f /r after the above steps.

    The first time you had run sfc /scannow it was not able to complete.
    This time it did complete but was not able to fix the corruption.
    So rerun the 3 Dism commands and see if it fixes the corruption.
    Shall I do the disms before #6 etc above?
      My ComputerSystem Spec


  2. Posts : 14,213
    windows 10 professional version 1607 build 14393.969 64 bit
       05 Nov 2017 #22

    Perform the 3 dism commands.
    If that fixes the corruption then run the sfc /scannow to confirm.
    Sometimes the sfc /scannow may display corruption again.
    Then run sfc /scannow 3 times to see if it can fix itself.
    And sometime there can be a loop where it does not fix itself even when Dism completes successfully.

    Once you have completed the above commands check the status of the drive with HD Tune.
    Once you have all of the testing completed then run the chkdsk command.
    All drives should be checked with both HD Tune and chkdsk to see their status as they are approximately 4 - 5 years old.
      My ComputerSystem Spec


  3. Posts : 82
    Win Pro 10x64 1709 16299.19
    Thread Starter
       06 Nov 2017 #23

    OKay thanks, will do. Created Restore point.
      My ComputerSystem Spec


  4. Posts : 82
    Win Pro 10x64 1709 16299.19
    Thread Starter
       06 Nov 2017 #24

    Code:
    Microsoft Windows [Version 10.0.16299.19]
    (c) 2017 Microsoft Corporation. All rights reserved.
    
    C:\WINDOWS\system32>dism /online /cleanup-image /checkhealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.16299.15
    
    Image Version: 10.0.16299.19
    
    No component store corruption detected.
    The operation completed successfully.
    
    C:\WINDOWS\system32>dism /online /cleanup-image /scanhealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.16299.15
    
    Image Version: 10.0.16299.19
    
    [==========================100.0%==========================] No component store corruption detected.
    The operation completed successfully.
    
    C:\WINDOWS\system32>dism /online /cleanup-image /restorehealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.16299.15
    
    Image Version: 10.0.16299.19
    
    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.
    
    C:\WINDOWS\system32>
    Will try sfc /scannow again 3 times if I have to.
      My ComputerSystem Spec


  5. Posts : 82
    Win Pro 10x64 1709 16299.19
    Thread Starter
       06 Nov 2017 #25

    Well still get that same error message in all 3 times sfc.
    Attached Thumbnails Attached Thumbnails sfc 3 times.JPG  
      My ComputerSystem Spec


  6. Posts : 14,213
    windows 10 professional version 1607 build 14393.969 64 bit
       06 Nov 2017 #26

    This had happened to multiple computers either earlier this year or late last year.
    To check the operating system on a regular basis you will need to use the dism commands.
    Once the drive is fully evaluated with HD Tune and chkdsk /x /f /r you can perform another in place upgrade repair.
      My ComputerSystem Spec


  7. Posts : 82
    Win Pro 10x64 1709 16299.19
    Thread Starter
       06 Nov 2017 #27

    Okay doing HD now..

    HD Tune Pro: ST500DM002-1BC142 Benchmark

    Test capacity: full

    Read transfer rate
    Transfer Rate Minimum : 16.2 MB/s
    Transfer Rate Maximum : 126.5 MB/s
    Transfer Rate Average : 85.4 MB/s
    Access Time : 17.0 ms
    Burst Rate : 176.4 MB/s
    CPU Usage : 9.2%

    What other option should I test in HD ?
      My ComputerSystem Spec


  8. Posts : 14,213
    windows 10 professional version 1607 build 14393.969 64 bit
       06 Nov 2017 #28

    Please post images into the thread for each tab: Health, Benchmark, Full error scan:
    Take Screenshot in Windows 10 General Tips Tutorials
      My ComputerSystem Spec


  9. Posts : 82
    Win Pro 10x64 1709 16299.19
    Thread Starter
       06 Nov 2017 #29

    Okay into Error scan now
    Attached Thumbnails Attached Thumbnails HD Error scan.JPG   HD Health scan.JPG  
    Last edited by ozstar; 06 Nov 2017 at 05:19.
      My ComputerSystem Spec


  10. Posts : 14,213
    windows 10 professional version 1607 build 14393.969 64 bit
       06 Nov 2017 #30

    Please also post an image of the benchmark tab with the chart/graph.
      My ComputerSystem Spec


 
Page 3 of 6 FirstFirst 12345 ... LastLast

Related Threads
Almost every time I start my computer I get the "windows couldn't load properly" blue screen message. I have the option to repair, continue, or to restart. When i restart the computer loads up fine. The computer is a dell xps 15, which is brand...
So I frequently get the event viewer message "The following boot-start or system-start driver(s) did not load: dam" Well, DAM I say! What is dam, and does anyone care? By the way, in other Windows, I like to keep my desktop quiet and calm. I...
Hi, I recently installed Win10 on a new computer. Everything runs fine except for when I start the computer. When I start it "cold" it automatically goes to the blue screen/repair screen. However if I immediately restart the computer from the...
I've had some fun and games with Windows 10 so far (Solved Windows 10 upgrade - random freezes and PC becomes unresponsive - Windows 10 Forums), and this forum has helped me get back on my feet. Now something else seems to have gone wrong. I was...
Hello, I'm new here. Sorry for posing another thread but I couldn't find one similar enough to my question. Anyway, my laptop began moving incredibly slow last night, like the cursor would hardly move and it sounded like it was running extra hard. I...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 08:35.
Find Us