BSOD Rendering a scene in VRAY and Sketchup Whea_uncorrectable_error

I tried using the memtest86.exe tu boot on usb but it cannot find any usb i plug in any idea why ?
thanks

Boot from USB Drive on Windows 10 PC Windows 10 Installation Upgrade Tutorials: Boot from USB Drive on Windows 10 PC Installation Upgrade Tutorials


Note
If you have fast boot or ultra fast boot enabled in your UEFI firmware settings, then you will need to temporarily disable fast boot or ultra fast boot to be able to boot from a USB.


How to Enable Fast Boot or Ultra Fast Boot in UEFI Firmware Settings for Windows: Enable or Disable Fast Boot in UEFI Firmware Settings for Windows Performance Maintenance Tutorials


1. Try another USB stick
2. Try all USB ports (2.0 and 3.0)
3. Maybe when using UEFI Bios u have temporarly switch to Legacy in BIOS settings
4. Turn off temporarily fast boot, secure boot, CSM if enabled


For another thread that had had problems they indicated which troubleshooting steps worked on their computer.
These may or may not work on yours but its worth a try:
1. I disabled the fast boot
2. I diasbled the secure boot control to get into CSM
3. I enabled the CSM and F10 to save and exit

Check PSU voltages and frequencies in the BIOS:
What are the BIOS 3.3, 5 and 12 voltage values?
What are the CPU voltage and frequency?
PSU - Test DC Output Voltage - Windows 7 Help Forums

zbook said:

Check PSU voltages and frequencies in the BIOS:
What are the BIOS 3.3, 5 and 12 voltage values?
What are the CPU voltage and frequency?
PSU - Test DC Output Voltage - Windows 7 Help Forums

CPU volatage and frequency
1.072 v and 4000mhz

PSU
3.3v = 3.392v
5v = 5.080v
12v = 120.96 v

zbook said:

Boot from USB Drive on Windows 10 PC Windows 10 Installation Upgrade Tutorials: Boot from USB Drive on Windows 10 PC Installation Upgrade Tutorials




Note
If you have fast boot or ultra fast boot enabled in your UEFI firmware settings, then you will need to temporarily disable fast boot or ultra fast boot to be able to boot from a USB.


How to Enable Fast Boot or Ultra Fast Boot in UEFI Firmware Settings for Windows: Enable or Disable Fast Boot in UEFI Firmware Settings for Windows Performance Maintenance Tutorials


1. Try another USB stick
2. Try all USB ports (2.0 and 3.0)
3. Maybe when using UEFI Bios u have temporarly switch to Legacy in BIOS settings
4. Turn off temporarily fast boot, secure boot, CSM if enabled


For another thread that had had problems they indicated which troubleshooting steps worked on their computer.
These may or may not work on yours but its worth a try:
1. I disabled the fast boot
2. I diasbled the secure boot control to get into CSM
3. I enabled the CSM and F10 to save and exit

This issue is fixed, i will run memtest tonight

Once you get Memtest86+ version 5.01 to run please indicate the modifications that you made.
Check the bios 12 V again.

check te 12v before testing ?

At any time please check the bios 12v
And for Memtest 86+ version 5.01 indicate which steps you made to have it function.

zbook said:

At any time please check the bios 12v
And for Memtest 86+ version 5.01 indicate which steps you made to have it function.

i could not get the memtest.exe install the boot to a usb as the softeare could not find the usb drives so i searche for an other version of it and found this one
MemTest86 - Download now!

zbook said:

At any time please check the bios 12v
And for Memtest 86+ version 5.01 indicate which steps you made to have it function.

i could not get the memtest.exe install the boot to a usb as the softeare could not find the usb drives so i searche for an other version of it and found this one
MemTest86 - Download now!

oups the 12v was 12.096v sorry of that mis-type