New
#11
For The SSD test i was not able to start a surface test and an extended self test as i needed to buy a copy out here but here it is
Attachment 161209Attachment 161210Attachment 161211Attachment 161212
For The SSD test i was not able to start a surface test and an extended self test as i needed to buy a copy out here but here it is
Attachment 161209Attachment 161210Attachment 161211Attachment 161212
Please use HD Tune to perform the surface or error scan on all drives.
It may take a few hours depending on the size of the drive and can be run overnight.
HD Tune also has health and benchmarks. Please run these tests and post into the thread.
All of the tests should be free with HD Tune:
HD Tune: http://www.hdtune.com/
The temperature for Prime95 was high.
For Prime95 and FurMark please post the test duration and maximum temperature.
Download and install the Intel Processor Diagnostic Tool
When the test completes please use the Microsoft snipping tool to post an image into the thread.
Download Intel® Processor Diagnostic Tool:
Download Intel® Processor Diagnostic Tool
The Intel® Processor Diagnostic Tool:
The Intel® Processor Diagnostic Tool
here you see the CPU test
and the GPU test with the time and the temp at the bottom
i am scared to prime test the cpu cause of the temp ...
and for the other test i will do it tonight
GPU FurMark: 1 hour 2 minutes; max temperature 70 C
CPU Prime95 3 minutes; max temperature 100 C
Memtest86+ version 5.01 pending 8 or more passes
HD tests: pending error and benchmark tests
Please confirm the above.
There are 3 drives. Please post HD Tune results for all drives: Health, benchmark, and error scan.
What happens to temperatures if you run Prime95 with the case open?
yes for the GPU test that is correct
CPU also i did not test further than that because of temp
i will Memtest tonight
an i am currently testing Drives
Can you open the case:
Clean the fans
See how the CPU temperatures change with Prime95?
Again abort testing as needed.
Aim to keep CPU < 90
Please run
CPU-Z | Softwares | CPUID
CPU-Z | Softwares | CPUID
open it and make screenshots of the following tabs
CPU
Mainboard
Memory
SPD*
Graphics
*SPD shows the details of each stick, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each stick.
Please post each screenshot in your next reply/replies.
CPU-Z screenshots
Attachment 161226Attachment 161227Attachment 161228Attachment 161229Attachment 161230Attachment 161231
Currently cleaning fans and Rad to run prime again
here is the first part of the test i had not posted at the begining, also the BIOS version is the good one, i am still cleaning all fans to the best i can for testing later tonight
thanks again
Microsoft Windows [Version 10.0.16299.19](c) 2017 Microsoft Corporation. All rights reserved.C:\Windows\system32>sfc /scannowBeginning system scan. This process will take some time.Beginning verification phase of system scan.Verification 100% complete.Windows Resource Protection did not find any integrity violations.C:\Windows\system32>dism /online /cleanup-image /restorehealthDeployment Image Servicing and Management toolVersion: 10.0.16299.15Image Version: 10.0.16299.19[==========================100.0%==========================] The restore operation completed successfully.The operation completed successfully.
here are the drives results
SSD
Attachment 161311Attachment 161312Attachment 161313
internal HDD
Attachment 161314Attachment 161315Attachment 161316
External HD
Attachment 161317Attachment 161318Attachment 161319
As for the prime test with case opened i stoped it after 2 min i think the temp where as shown in the attachement
Attachment 161321Attachment 161322
i am going to do the memtest tonight and come back tomorow with it
thanks