Page 1 of 19 12311 ... LastLast
  1.    4 Weeks Ago #1
    Join Date : Oct 2017
    Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19

    WHEA_UNCORRECTABLE_ERROR - Random reboots and 0x124 error


    My system:
    i7-7700K
    MSI Z270 Gaming Pro Carbon
    GSkill Trident-Z 3600Mhz
    Gigabyte Geforce 1070 GTX
    SoundBlaster Z
    ... hard drives, etc ...

    I'm getting random BSOD... sometimes within 10-15 minutes of a fresh reboot... sometimes after 12 hours.

    What I've tried:
    Core Temp says all temps are good
    No Intel Extreme Tuning Utility installed
    Ran Intel Processor Diagnostics Tool -- All is A-OK
    Uninstalled MSI Afterburner
    Updated drivers from MSI website for mobo
    No overclock for mobo (never did)
    Flashed mobo latest firmware (again)
    Memtest86+ 8 passes (only an error with one stick and getting an RMA; still getting BSODs with the single stick with no errors)
    CHKDSK
    Driver Verifier (though I'm not sure what logs are available? Help here, if you can. I eventually did get a BSOD, but not sure if it was due to Driver Verifier)

    Minidumps are attached.

    Help, if you can. Happy to provide more information!

    Thanks,
    diznanl
      My ComputerSystem Spec
  2.    4 Weeks Ago #2
    Join Date : Apr 2017
    Posts : 8,806
    windows 10 professional version 1607 build 14393.969 64 bit

    Please post a kernal memory dump into the thead:
    memory dump file: %SystemRoot%\MEMORY.DMP or C:\Windows\MEMORY.DMP
    Use file explorer > this PC > local C: drive > right upper corner search enter each of the above to find results > use one drive or drop box to post a share link into the thread.

    For WHEA 0x124 error we will test the computers: CPU, GPU, Drive, RAM, and check the PSU.

    For all tests please post images into the thread.
    If there is difficulty posting images then use a one drive or drop box share link.

    Open administrative command prompt and type or copy and paste:
    1) sfc /scannow
    2) dism /online /cleanup-image /restorehealth
    3) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    4) Make sure that there is no over clocking while troubleshooting.

    5) Sometimes there are problems in the bios that produce bsod.

    The BIOS: BIOS Version/Date American Megatrends Inc. 1.50, 6/27/2017

    6) Please check to see if this is the most up to date version.

    7) To ensure that there are no improper bios settings please reset the bios.

    8) Sometimes there can be failure to boot after resetting the bios.

    9) So please make sure your files are backed up.

    10) Please make a backup image with Macrium:

    Macrium Software | Macrium Reflect Free:
    Macrium Software | Your Image is Everything
    Macrium Software | Macrium Reflect Free

    11) And please create a brand new restore point.

    How to Clear Your Computers CMOS to Reset BIOS Settings:
    How to Clear Your Computers CMOS to Reset BIOS Settings

    3 Ways to Reset Your BIOS - wikiHow:
    3 Ways to Reset Your BIOS - wikiHow

    12) When testing for WHEA hardware errors we need to systematically check CPU, GPU, memory and drive.

    Once the bios is reset and there is no overclocking:

    13) Choose one of the temperature monitoring software applications: Speecy, HW monitor, Speed fan:

    Speccy - Free Download - Piriform: Speccy - System Information - Free
    Speccy - System Information - Free Download

    HWMONITOR | Softwares | CPUID: HWMONITOR | Softwares | CPUID
    HWMONITOR | Softwares | CPUID

    SpeedFan - Access temperature sensor in your computer: SpeedFan - Access temperature sensor in your computer
    SpeedFan - Access temperature sensor in your computer

    14) Run Prime95 - Stress Test Your CPU

    Prime95 - Stress Test Your CPU Windows 10 Performance Maintenance Tutorials
    Prime95 - Stress Test Your CPU Performance Maintenance Tutorials

    15) Record maximum temperatures and duration of testing.

    16) Please use the Microsoft snipping tool to post images into the thread.

    Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
    Take Screenshot in Windows 10 General Tips Tutorials

    17) Run memtest86+ version 5.01 for at least 8 passes.
    Memtest86+ - Advanced Memory Diagnostic Tool

    This may take hours so plan to run it overnight.

    Please make sure you use the Memtest86+ version 5.01 with the link below.
    Memtest86+ - Advanced Memory Diagnostic Tool

    The testing is done not by time but by passes.

    The more passes the better.

    There are a significant number of false negatives if fewer than 8 passes are made.

    A false negative is a pass when there is malfunctioning RAM.

    There is 8 GB of RAM on the computer.

    Memtest86+ version 5.01 testing takes approximately 1 - 2 hours /GB RAM

    Just 1 error is a fail and you can abort testing.

    Memtest86+ - Advanced Memory Diagnostic Tool
    Memtest86+ - Advanced Memory Diagnostic Tool

    Microsoft Community
    Memory problems. - Microsoft Community

    18) When Memtest86+ has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image of the results into the thread.

    MemTest86+ - Test RAM Windows 10 BSOD Tutorials
    MemTest86+ - Test RAM BSOD Tutorials

    MemTest86+ needs to be run for at least 8 complete passes for conclusive results.

    19) Run HD Sentinel:

    Hard Disk Sentinel - HDD health and temperature monitoring

    When it has completed please use the Microsoft snipping to make images and post them into the thread.

    Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
    Take Screenshot in Windows 10 General Tips Tutorials

    20) Run FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials

    Please make note of the importance of temperature monitoring and aborting the test in the GPU link.

    FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials:

    FurMark - GPU Stress Test Performance Maintenance Tutorials

    21) All of these test should be done with the bios reset and no over clocking.

    22) For each of the above tests please record maximum temperatures.

    24) And please make sure that you use the Microsoft snipping tool to post images of each into the thread.

    Take Screenshot in Windows 10 Windows 10 General Tips Tutorials

    23) Please update the information on the computer specifications:

    Ten Forums System Specificiations (Specs)

    Please fill in your system specs

    Please follow this tutorial and download the tool.

    System Info - See Your System Specs - Windows 7 Help Forums
    System Info - See Your System Specs - Windows 7 Help Forums

    The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling, case, and other used stuff like mouse, keyboard, joystick, xbox, headphone, printer, etc.

    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'.

    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

    24) Open administrative command prompt and type or copy and paste: chkdsk /x /f /r
    This may take many hours to run so plan to run it overnight.

    25) Post the chkdsk results into the thread:
    Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials

    26) Turn off Windows fast startup:
    Turn On or Off Fast Startup in Windows 10 Performance Maintenance Tutorials

    27) Update ffusb2audio.sys Focusrite USB 2.0 Audio Driver
    Updating a driver: Updating a driver. - Microsoft Community

    28) Uninstall Malwarebytes using control panel



    Code:
    Name    Scarlett 2i4 USBManufacturer    Focusrite Audio Engineering Limited
    Status    OK
    PNP Device ID    USB\VID_1235&PID_800A\5&13FE7C4D&0&14
    Driver    c:\windows\system32\drivers\ffusb2audio.sys (2.5.128.1, 124.30 KB (127,280 bytes), 7/19/2017 10:48 AM)
    
    
    Code:
    ffusb2audio    Focusrite USB 2.0 Audio Driver    c:\windows\system32\drivers\ffusb2audio.sys    Kernel Driver    Yes    Manual    Running    OK    Normal    No    Yes

    farflt.sys Malwarebytes Anti-Ransomware Protection Downloads: https://www.malwarebytes.org/downloads/
    Support: https://www.malwarebytes.org/support/

    mbamchameleon.sys Malwarebytes Chameleon Protection Driver https://www.malwarebytes.org/chameleon/ If using this

    Code:
    Event[12155]:  Log Name: System
      Source: Microsoft-Windows-Kernel-Boot
      Date: 2017-10-22T14:43:03.649
      Event ID: 29
      Task: N/A
      Level: Error
      Opcode: Info
      Keyword: N/A
      User: S-1-5-18
      User Name: NT AUTHORITY\SYSTEM
      Computer: Dan-PC
      Description: 
    Windows failed fast startup with error status 0xC00000D4.
    Code:
    Event[12151]:  Log Name: System
      Source: Microsoft-Windows-WHEA-Logger
      Date: 2017-10-22T14:34:17.902
      Event ID: 19
      Task: N/A
      Level: Warning
      Opcode: Info
      Keyword: N/A
      User: S-1-5-19
      User Name: NT AUTHORITY\LOCAL SERVICE
      Computer: Dan-PC
      Description: 
    A corrected hardware error has occurred.
    
    
    Reported by component: Processor Core
    Error Source: Corrected Machine Check
    Error Type: Cache Hierarchy Error
    Processor APIC ID: 5
    
    
    The details view of this entry contains further information.
    
    
    Event[12152]:
      Log Name: System
      Source: Microsoft-Windows-WHEA-Logger
      Date: 2017-10-22T14:34:19.540
      Event ID: 19
      Task: N/A
      Level: Warning
      Opcode: Info
      Keyword: N/A
      User: S-1-5-19
      User Name: NT AUTHORITY\LOCAL SERVICE
      Computer: Dan-PC
      Description: 
    A corrected hardware error has occurred.
    
    
    Reported by component: Processor Core
    Error Source: Corrected Machine Check
    Error Type: Cache Hierarchy Error
    Processor APIC ID: 5
    
    
    The details view of this entry contains further information.
    Code:
    Event[14106]:  Log Name: System
      Source: Service Control Manager
      Date: 2017-10-23T22:04:45.585
      Event ID: 7026
      Task: N/A
      Level: Information
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Dan-PC
      Description: 
    The following boot-start or system-start driver(s) did not load: 
    AFD
    cdrom
    CSC
    dam
    Dfsc
    ESProtectionDriver
    EUDSKACS
    EUFDDISK
    FileCrypt
    GpuEnergyDrv
    HWiNFO32
    NetBIOS
    NetBT
    npsvctrig
    nsiproxy
    Psched
    rdbss
    SASDIFSV
    SASKUTIL
    tdx
    vwififlt
    WdFilter





    Code:
    Event[9503]:  Log Name: System
      Source: Display
      Date: 2017-10-20T18:33:00.169
      Event ID: 4101
      Task: N/A
      Level: Warning
      Opcode: Info
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Dan-PC
      Description: 
    Display driver nvlddmkm stopped responding and has successfully recovered.
    Code:
    Event[9661]:  Log Name: System
      Source: Display
      Date: 2017-10-20T21:40:24.645
      Event ID: 4101
      Task: N/A
      Level: Warning
      Opcode: Info
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: Dan-PC
      Description: 
    Display driver nvlddmkm stopped responding and has successfully recovered.
    Code:
    5: kd> !errrec ffffd58a43628028===============================================================================
    Common Platform Error Record @ ffffd58a43628028
    -------------------------------------------------------------------------------
    Record Id     : 01d34c4bf1c5e342
    Severity      : Fatal (1)
    Length        : 928
    Creator       : Microsoft
    Notify Type   : Machine Check Exception
    Timestamp     : 10/24/2017 4:08:43 (UTC)
    Flags         : 0x00000000
    
    
    ===============================================================================
    Section 0     : Processor Generic
    -------------------------------------------------------------------------------
    Descriptor    @ ffffd58a436280a8
    Section       @ ffffd58a43628180
    Offset        : 344
    Length        : 192
    Flags         : 0x00000001 Primary
    Severity      : Fatal
    
    
    Proc. Type    : x86/x64
    Instr. Set    : x64
    Error Type    : Cache error
    Operation     : Instruction Execute
    Flags         : 0x00
    Level         : 0
    CPU Version   : 0x00000000000906e9
    Processor ID  : 0x0000000000000005
    
    
    ===============================================================================
    Section 1     : x86/x64 Processor Specific
    -------------------------------------------------------------------------------
    Descriptor    @ ffffd58a436280f0
    Section       @ ffffd58a43628240
    Offset        : 536
    Length        : 128
    Flags         : 0x00000000
    Severity      : Fatal
    
    
    Local APIC Id : 0x0000000000000005
    CPU Id        : e9 06 09 00 00 08 10 05 - bf fb fa 7f ff fb eb bf
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
    
    
    Proc. Info 0  @ ffffd58a43628240
    
    
    ===============================================================================
    Section 2     : x86/x64 MCA
    -------------------------------------------------------------------------------
    Descriptor    @ ffffd58a43628138
    Section       @ ffffd58a436282c0
    Offset        : 664
    Length        : 264
    Flags         : 0x00000000
    Severity      : Fatal
    
    
    Error         : ICACHEL0_IRD_ERR (Proc 5 Bank 0)
      Status      : 0xf600064000040150
      Address     : 0x00007ffdf620f0e0
      Misc.       : 0x0000000000000000
    Last edited by zbook; 4 Weeks Ago at 23:40.
      My ComputerSystem Spec
  3.    4 Weeks Ago #3
    Join Date : Oct 2017
    Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter

    Dropbox - MEMORY.DMP

    Here is the memory dump...
      My ComputerSystem Spec
  4.    3 Weeks Ago #4
    Join Date : Oct 2017
    Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter

    Microsoft Windows [Version 10.0.15063](c) 2017 Microsoft Corporation. All rights reserved.C:\WINDOWS\system32>sfc /scannowBeginning system scan. This process will take some time.Beginning verification phase of system scan.Verification 100% complete.Windows Resource Protection did not find any integrity violations.C:\WINDOWS\system32>dism /online /cleanup-image /restorehealthDeployment Image Servicing and Management toolVersion: 10.0.15063.0Image Version: 10.0.15063.0[==========================100.0%==========================] The restore operation completed successfully.The operation completed successfully.C:\WINDOWS\system32>
      My ComputerSystem Spec
  5.    3 Weeks Ago #5
    Join Date : Oct 2017
    Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter

    My Computer information updated
      My ComputerSystem Spec
  6.    3 Weeks Ago #6
    Join Date : Apr 2017
    Posts : 8,806
    windows 10 professional version 1607 build 14393.969 64 bit

    For all tests please make note of the warnings to abort testing in the above links.
    For Prime95 CPU testing aim for > 3 hours stress testing. Record highest temperatures and test duration and post results with images into the thread.
    For FurMark GPU testing aim for 1 hour stress testing. Record highest temperatures and test duration and post results with images into the thread.
    These tests can be run overnight:
    For Memtest86+ version 5.01 testing it is not run by time but by passes. Please make sure that there are at least 8 passes and the more the better. Please use a camera or smart phone camera to take a picture and post an image into the thread.
    Chkdsk /x /f /r
    HD Sentinel error scan
    Please update you progress with the steps as they are accomplished (most of the steps can be done in any order once the restore point and backup image are made.)
      My ComputerSystem Spec
  7.    3 Weeks Ago #7
    Join Date : Oct 2017
    Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter

    I apologize, I didn't take photos of my tests... but here are the results:

    Prime95 - The temps shot up to 95 degrees almost immediately. I ran it for 8 hours, overnight, without any issues. I know this was foolish... but it ran.

    FuMark - temps maxed at 69 degrees, averaged 66 degrees. No artifacts or crashing. Ran for 10 minutes because ... it was cruising along just fine without any issues or artifacts.

    HD Sentinel

    Click image for larger version. 

Name:	image.png 
Views:	1 
Size:	182.6 KB 
ID:	160448

    I uninstalled MalwareBytes (why was this an issue?). I also uninstalled Easus Total Backup, SUPERAntispyware, and HWiNFO32.

    Focusrite audio USB 2.0 driver was updated.

    As mentioned in my original post, Memtest86+ found one issue in 8 passes with one of my modules. I have removed it. I'm now only running a single 8GB module which passed a second 8 passes with no issue.

    ---

    One item that is concerning me is that I recently installed a new hard drive, a Samsung V-NAND SSD 850 EVO. I used Easus Total Backup to clone (image) another drive to this. I think... it was around the time I started getting BSODs (10/11/2017). I've removed this drive temporarily (not listed in My Computer specs) to test whether something to do with this drive and/or the clone is causing the BSODs (WHEA_UNCORRECTABLE_ERROR 0x124).
      My ComputerSystem Spec
  8.    3 Weeks Ago #8
    Join Date : Apr 2017
    Posts : 8,806
    windows 10 professional version 1607 build 14393.969 64 bit

    All tests need to be verified with images.
    This should make the results reproducible and then further tests can be performed with the confidence of the verified tests.
    It avoids misunderstandings, accidents, etc.
    Tests in other threads were performed using different software. Results were reported that were incorrect. So for these reasons we require images of all test results in the thread.

    For Furmark GPU testing please aim for 1 hour testing. Please make note of the warnings and please post images into the thread.

    There were 3 drivers identified in the debugging that were related to the BSODs.
    2 were related to Malwarebytes
    1 was related to Focuswrite

    The other drivers that were posted were related to failure during boot.

    When you have 2 weeks of a stable computer environment (no BSODs etc) you can then reinstall Malwarebytes and monitor for bsod. If there are new BSOD then you will need to use other AV software and if there are no BSOD you can continue using it. During the troubleshooting process it is much easier to uninstall so that it is no longer a cause of BSOD.

    Please use HD Tune http://www.hdtune.com/ (there are multiple tabs for testing) to perform an error scan and benchmarks of all drives. This may take hours and can be done overnight.
    For HD Sentinel there is a surface test that can be performed on the paid edition or the 30 day trial edition. If you have this option please perform the error scan. Otherwise please use HD Tune.
    All drives should have images of: 1) health, 2) error scan (surface scan), 3) benchmarks
    Model ST4000DM000-1F2168
    Model Samsung SSD 850 EVO 500GB

    For all drives/partitions please perform chkdsk /x /f /r and the software drive tests to display health, benchmarks, and error scans.
    Last edited by zbook; 3 Weeks Ago at 19:34.
      My ComputerSystem Spec
  9.    3 Weeks Ago #9
    Join Date : Oct 2017
    Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter

    Samsung V-NAND SSD 850 EVO was no the cause of BSOD. I got a WHEA_UNCORRECTABLE_ERROR shortly after posting.

    I'll restart testing so I can capture screenshots and pictures.

    I've looked at HDTune and can't determine which scan I should do... Please elaborate. I appreciate the feedback and am looking forward to your help.

    I'll be running chkdsk /x /f /r on all drives this evening.

    Thanks,
    diznanl
      My ComputerSystem Spec
  10.    3 Weeks Ago #10
    Join Date : Apr 2017
    Posts : 8,806
    windows 10 professional version 1607 build 14393.969 64 bit

    The logs that you had submitted with the DM log collector displayed both drives.

    There were 17 BSOD mini dumps collected and the WHEA 124 BSOD had occurred in many of them. Also in the logs there were many BSOD WHEA 0x124 since 10/17.
    So all hardware needs to be systematically tested to see if there is malfunctioning hardware.
    For each HD Sentinel and HD Tune there are either error or surface scans.
    These may take hours to perform depending on the size of the drive.
    For HD Sentinel click disk tab > surface test (it is free for paid, or 30 day free trial)
    For HD Tune click each benchmark, health and error tabs.

    The last BSOD mini dump was on 10/24.
    If there are any BSOD please post a new zip.
    BSOD - Posting Instructions - Windows 10 Forums


    During this Windows upgrade period some commands are not working for the Windbg debugging.
    This is the WHEA 0x124 information:

    Code:
    Common Platform Error Record @ ffffcd0b77003028-------------------------------------------------------------------------------
    Record Id     : 01d34cfccb189d05
    Severity      : Fatal (1)
    Length        : 928
    Creator       : Microsoft
    Notify Type   : Machine Check Exception
    Timestamp     : 10/25/2017 0:50:02 (UTC)
    Flags         : 0x00000000
    
    
    ===============================================================================
    Section 0     : Processor Generic
    -------------------------------------------------------------------------------
    Descriptor    @ ffffcd0b770030a8
    Section       @ ffffcd0b77003180
    Offset        : 344
    Length        : 192
    Flags         : 0x00000001 Primary
    Severity      : Fatal
    
    
    Proc. Type    : x86/x64
    Instr. Set    : x64
    Error Type    : Cache error
    Operation     : Instruction Execute
    Flags         : 0x00
    Level         : 0
    CPU Version   : 0x00000000000906e9
    Processor ID  : 0x0000000000000004
    
    
    ===============================================================================
    Section 1     : x86/x64 Processor Specific
    -------------------------------------------------------------------------------
    Descriptor    @ ffffcd0b770030f0
    Section       @ ffffcd0b77003240
    Offset        : 536
    Length        : 128
    Flags         : 0x00000000
    Severity      : Fatal
    
    
    Local APIC Id : 0x0000000000000004
    CPU Id        : e9 06 09 00 00 08 10 04 - bf fb fa 7f ff fb eb bf
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
    
    
    Proc. Info 0  @ ffffcd0b77003240
    
    
    ===============================================================================
    Section 2     : x86/x64 MCA
    -------------------------------------------------------------------------------
    Descriptor    @ ffffcd0b77003138
    Section       @ ffffcd0b770032c0
    Offset        : 664
    Length        : 264
    Flags         : 0x00000000
    Severity      : ​Fatal
    
    
    Error         : ICACHELO_IRD_ERR (Proc 4 Bank 0)
      Status      : 0xf6002c0000040150
      Address     : 0x00000000063250e6
      Misc.       : 0x0000000000000000
      My ComputerSystem Spec

 
Page 1 of 19 12311 ... LastLast


Similar Threads
Thread Forum
Random reboots
Hello, I've been having an issue with my PC randomly rebooting. I never really notice a BSOD as the computer just reboots with no apparent error but a 'memory.dmp' file is generated every time. I've done chkdsk's and also ran memtest86 numerous...
BSOD Crashes and Debugging
Random WHEA_UNCORRECTABLE_ERROR
It's been a week. Happens about 5 times already. Randomly And don't even show the BSOD, PC just crashes with a White or Dark Gray screen. I just see after PC restart in the Minidump folder: WHEA_UNCORRECTABLE_ERROR 116734
BSOD Crashes and Debugging
BSOD 0x124 WHEA_UNCORRECTABLE_ERROR
i have had this error for like a month, tested all components on the Pc and none of them seems to be failing, so i started searching so i can figured out which component is failing according to minidump file according to minidump it say...
BSOD Crashes and Debugging
Solved Random Restarts with 0x124 Dump
Hi, and thanks in advance for any and all assistance, and sorry if this turns into a long post! I have a problem that has been infuriating me for the past month or so. I was away for studies for about 5 months, and once I returned, fired up my PC...
BSOD Crashes and Debugging
Bsod 0x124 whea_uncorrectable_error. Nothing works.
First sorry for creating a duplicate post. I am insider since before the build 10240, and always tried to resolve this error by myself. I researched a lot and found this forum, which even had posts about my problem. After trying all a bit...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:39.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums