Windows 10: WHEA_UNCORRECTABLE_ERROR - Random reboots and 0x124 error Solved

Page 7 of 19 FirstFirst ... 5678917 ... LastLast

  1. Posts : 14,272
    windows 10 professional version 1607 build 14393.969 64 bit
       30 Oct 2017 #61

    Can you re-post the information on Prime95 as you remember it.
    If you can run it for a few minutes and abort if it goes over 95 that will work.
    Do not let it remain hot but a temporary rise is sufficient to document it in the thread.
    This way there is some verifying information in the thread.

    in the earlier post you were able to trigger BSOD using HD Sentinel. Please see if that has been fixed.
    There were 14 BSOD on 10/26 and all were WHEA 0x124 bugchecks.
      My ComputerSystem Spec


  2. Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter
       30 Oct 2017 #62

    FurMark results below:
    Avg temp: 64 degrees
    Max temp: 65 degrees
    No artifacts

    Click image for larger version. 

Name:	image.png 
Views:	1 
Size:	766.3 KB 
ID:	161337
    Attached Thumbnails Attached Thumbnails image.png  
    Last edited by diznanl; 30 Oct 2017 at 22:07.
      My ComputerSystem Spec


  3. Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter
       30 Oct 2017 #63

    Prime95 Results:

    Code:
    [Main thread Oct 30 21:50] Mersenne number primality test program version 28.10
    [Main thread Oct 30 21:50] Optimizing for CPU architecture: Unknown Intel, L2 cache size: 256 KB, L3 cache size: 8 MB
    
    [Main thread Oct 30 21:50] Logical CPUs 1,2 form one physical CPU.
    
    [Main thread Oct 30 21:50] Logical CPUs 3,4 form one physical CPU.
    
    [Main thread Oct 30 21:50] Logical CPUs 5,6 form one physical CPU.
    
    [Main thread Oct 30 21:50] Logical CPUs 7,8 form one physical CPU.
    
    [Main thread Oct 30 21:50] Starting workers.
    
    [Main thread Oct 30 21:52] Stopping all worker threads.
    
    [Main thread Oct 30 21:52] Execution halted.
    Temps got up to 100 on the first core so I halted it.

    Click image for larger version. 

Name:	image.png 
Views:	1 
Size:	467.9 KB 
ID:	161341
      My ComputerSystem Spec


  4. Posts : 14,272
    windows 10 professional version 1607 build 14393.969 64 bit
       31 Oct 2017 #64

    Open the case > clean fans > leave case open > repeat prime95 and abort testing as needed again.
      My ComputerSystem Spec


  5. Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter
       31 Oct 2017 #65

    zbook said: View Post
    Open the case > clean fans > leave case open > repeat prime95 and abort testing as needed again.
    Done... will be running another test shortly.

    Should I try re-seating the CPU cooler on the CPU (cleaning / re-apply arctic thermal paste?)
      My ComputerSystem Spec


  6. Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter
       31 Oct 2017 #66

    zbook said: View Post
    in the earlier post you were able to trigger BSOD using HD Sentinel. Please see if that has been fixed.
    There were 14 BSOD on 10/26 and all were WHEA 0x124 bugchecks.
    It appears to be fixed, but took significantly longer (perhaps due to write-cache being off?)
    Click image for larger version. 

Name:	image.png 
Views:	1 
Size:	266.2 KB 
ID:	161537
      My ComputerSystem Spec


  7. Posts : 14,272
    windows 10 professional version 1607 build 14393.969 64 bit
       31 Oct 2017 #67

    There were testing results indicating problems with the CPU and drive that need further evaluation.
    So with another day or two the DM log collector event log can be reevaluated with the cache available.
    Perform any steps to reduce the heat or improve the cooling of the CPU. And then repeat testing and post images into the thread.
    Please update the status of the yellow triangles in device manager.
      My ComputerSystem Spec


  8. Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter
       31 Oct 2017 #68

    diznanl said: View Post
    After running Memtest86+ 5.01 version on my "good" RAM module, I decided to test with the "bad" stick that the other MemTest86+ recorded. I ran it all night and it came up with no errors. I decided to add it back to my machine:

    Click image for larger version. 

Name:	ZOE_0011.jpg 
Views:	1 
Size:	741.8 KB 
ID:	161545
      My ComputerSystem Spec


  9. Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter
       31 Oct 2017 #69

    zbook said: View Post
    There were testing results indicating problems with the CPU and drive that need further evaluation.
    So with another day or two the DM log collector event log can be reevaluated with the cache available.
    Perform any steps to reduce the heat or improve the cooling of the CPU. And then repeat testing and post images into the thread.
    Please update the status of the yellow triangles in device manager.
    I cleaned the fans with compressed air and am still gett 100 degree temps. I guess I may need to re-seat the CPU.

    Code:
    [Main thread Oct 31 20:17] Mersenne number primality test program version 29.3
    [Main thread Oct 31 20:17] Optimizing for CPU architecture: Core i3/i5/i7, L2 cache size: 256 KB, L3 cache size: 8 MB
    [Main thread Oct 31 20:17] Starting workers.
    [Main thread Oct 31 20:32] Stopping all worker threads.
    [Main thread Oct 31 20:32] Execution halted.
    Click image for larger version. 

Name:	image.png 
Views:	3 
Size:	456.0 KB 
ID:	161548
      My ComputerSystem Spec


  10. Posts : 115
    Microsoft Windows 10 Pro 64-bit - Version 1709 - Build 16299.19
    Thread Starter
       31 Oct 2017 #70

    zbook said: View Post
    Please update the status of the yellow triangles in device manager.
    The triangles won't go away... I haven't been able to figure out how to keep them from coming back after uninstalling.

    On a side note, I'm also not able to access my start menu after the latest Fall Creator's update (installed 10/26), making it difficult to access my Device Manager ... Going to be using devmgmt.msc via command line to see if that helps.

    *EDIT*

    I found out what device was creating the yellow triangles, but still don't know why they are showing. I have a mouse/keyboard combo that I haven't had connected to the computer for ages; I have been using it on my PS4. I decided to test plugging this in and the yellow triangles immediately went away.

    This said, I don't know why they come back when they dongle is disconnected. I've just disconnected it and will restart to see if they remain.

    For reference, the mouse/keyboard combo model number is IOGear GKM561R. Will update this thread after confirming whether yellow triangles still remain.

    **EDIT 2**
    They are still there after the device is removed and after a reboot. I will attempt rebooting with the device plugged in and attempt to update drivers (though non exist from IOGear)
    Last edited by diznanl; 31 Oct 2017 at 23:28.
      My ComputerSystem Spec


 
Page 7 of 19 FirstFirst ... 5678917 ... LastLast

Related Threads
Random reboots in BSOD Crashes and Debugging
Hello, I've been having an issue with my PC randomly rebooting. I never really notice a BSOD as the computer just reboots with no apparent error but a 'memory.dmp' file is generated every time. I've done chkdsk's and also ran memtest86 numerous...
Random WHEA_UNCORRECTABLE_ERROR in BSOD Crashes and Debugging
It's been a week. Happens about 5 times already. Randomly And don't even show the BSOD, PC just crashes with a White or Dark Gray screen. I just see after PC restart in the Minidump folder: WHEA_UNCORRECTABLE_ERROR 116734
BSOD 0x124 WHEA_UNCORRECTABLE_ERROR in BSOD Crashes and Debugging
i have had this error for like a month, tested all components on the Pc and none of them seems to be failing, so i started searching so i can figured out which component is failing according to minidump file according to minidump it say...
Solved Random Restarts with 0x124 Dump in BSOD Crashes and Debugging
Hi, and thanks in advance for any and all assistance, and sorry if this turns into a long post! I have a problem that has been infuriating me for the past month or so. I was away for studies for about 5 months, and once I returned, fired up my PC...
First sorry for creating a duplicate post. I am insider since before the build 10240, and always tried to resolve this error by myself. I researched a lot and found this forum, which even had posts about my problem. After trying all a bit...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:19.
Find Us