New
#21
Please post a new zip.
Please post a new zip.
Drive D: Correcting errors in the master file table's (MFT) BITMAP attribute. Windows has made corrections to the file system.
ST1500D: Problems with spin retry count and an unknown attribute.
Run HD Sentinel free or trial edition on each drive:
https://www.hdsentinel.com/
https://www.tenforums.com/tutorials/6102-take-screenshot-windows-10-a.html
For each test we need to verify the test results.
Please run Memtest86+ version 5.01 for 8 or more passes.
When the test has completed please use a camera or smart phone camera to take a picture and post an image into the thread.
If you are unable to post a picture please use a one drive or drop box share link.
Code:Event[11432]: Log Name: System Source: BTHUSB Date: 2017-10-20T09:21:53.784 Event ID: 34 Task: N/A Level: Warning Opcode: N/A Keyword: Classic User: N/A User Name: N/A Computer: Mike1 Description: The local adapter does not support an important Low Energy controller state to support peripheral mode. The minimum required supported state mask is 0x491f7fffff, got 0x1fffffff. Low Energy peripheral role functionality will not be available.
Here's HD sentinel . Will have to do memtest later I left the disk at work
I wonder what the odds are that memory is actually bad after doing that first 8 passes.
Any findings from the zip? I know of a few things like the spin retry and unknown attribute on the seagate drive. Those have been there for years
The results that you reported for CPU and GPU were OK and there have been no new BSOD.
What are the BIOS 3.3, 5 and 12 voltage values?
What are the CPU voltage and frequency?
PSU - Test DC Output Voltage - Windows 7 Help Forums
Please use a camera or smart phone camera to take a picture and post an image into the thread.
where in the bios am I looking for the 3.5, 5 and 12 volts?
Which temperature monitoring software did you use?
Download and install CPU-Z
CPU-Z | Softwares | CPUID
CPU-Z | Softwares | CPUID
open it and make screenshots of the following tabs
CPU
Mainboard
Memory
SPD*
Graphics
Also on the bottom click tools > clocks > post an image.
*SPD shows the details of each stick, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each stick.
Please post each screenshot in your next reply/replies.