BSOD problem that just keeps coming back

I been having issues with my AMD radeon HD 6670 drivers, I'm using win 10 pro. The driver isnt up to date since it causes conflict with windows 10.

Ran memtest86 overnight, no issues.

It has something to do with the version of my driver, this issues has happened multiple times before, I always managed to fix it somehow either uninstalling and installing an older version. I cant remember sadly

I ran the verifier before to checevery singlesingle BSOD I was having at the time and managed fix all of them, exept the display driver. Once that was fixed I had no more BSOD, so this new one is completly random-


Honestly at this point I am not sure what else is causing it.

Attachment 155201

MemTest in its default configuration does not test all memory range.

Start MemTest and press C -Configuration.
On the new menu select Memory Range and then Test All Memory Range.

Just let it run for 1-2 hours.

Run MemTest86+ V5.01 at least 8 complete passes

Diagnostic Test

 RAM TEST

Run MemTest86+ V5.01 to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

   Note

MemTest86+ V5.01 needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

More Info here: Memory problems. - Microsoft Community

Make a photo of the result and post it.

Ok, I will try and do that tonight!

After you boot from the usb with MemTest, press:

(c) Configuration
(2) Address Range
(3) Test All Memory
(0) Continue

Same as always, no error found

Attachment 155648

For proper Memtest86+ version 5.01 testing we use a minimum of 8 passes.
Fewer than 8 passes has a significant incidence of false negatives.
A false negative is a test result that displays pass when there is malfunctioning RAM.
Sometimes it has taken passes into the 20's to find malfunctioning RAM.
For 8 GB of RAM the estimated testing time is 1 - 2 hours / GB RAM.
Just 1 error is a fail and you can abort testing.
Then test 1 RAM module at a time in the same DIMM for 8 or more passes.

Memory problems. - Microsoft Community

MemTest86+ - Test RAM Windows 10 BSOD Tutorials


If you can please perform a better test with 8 or more passes to reduce the false negatives.


Please post a memory dump file: %SystemRoot%\MEMORY.DMP or C:\Windows\MEMORY.DMP

Use file explorer > this PC > local C: drive > right upper corner search enter each of the above to find results.

Post a share link using one drive or drop box.

Ok, I am going to let it run for more time, sadly all my memory dump got all deleted

What happened to the memory dumps?
Are you using Ccleaner?
Did you modify the settings?
Did you use disk cleanup?
And did you modify the settings?
Going forward if you modify these settings once they are formed they should remain available.