I have a constant issue with rebooting the computer and it automatically goes into repair mode but then fails and directs me to the log file C:\Windows\System32\LogFiles\Srt. I have racked my brain on this but still cannot figure it out.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Make a photo of the result and post it.
Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.
This problem I don't believe has anything to do with the memory though.
I want to add that it's always the second reboot that causes the failure it's not the first reboot after the bsod message.
BSOD Minidump - Configure to Create in Windows 10
How to configure Windows 10 to configure Dump Files to be written in the event of a Blue Screen of Death (BSOD).
Memory is fine. Pc just got from dell. Has server grade ECC sticks. This is a driver issue with deep freeze
Then have fun with fixing the problem yourself. When you know whats the problem I see no need receiving any help here.
I did fix the problem myself thanks to no help from you :)
Quote
